Cat Pump O'Ring Buna Sleeve

Cat Pump O'Ring Buna Cylinder

Cat Pump Backup O'Ring

Cat Pumps Kit O'ring Buna 31708

Cat Pump 43343 O'Ring Bearing Case

Cat Pump 33004 Seal Case Socket Seal Case Removal Tools Simplifies seal replacement for various plunger pumps. 1/2" Drive Socket for 5 Frame model

Cat Pumps 33005 Seal Case Socket Simplifies seal replacement for various plunger pumps. 1/2" Drive for 7 frame

Cat Pumps 33006 Seal Case Socket Simplifies seal replacment for various plunger pumps. 1/2" Drive for 15 frame

Cat Pump 2SFQ25SEEL Direct Drive Plunger Pump This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.   Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.   Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.   Technical Specifications Max Flow: 2.5 gpm / 9.5 lpm Max Pressure: 1200 Inlet Port Size: 3/8" NPT(F) Discharge Port Size: 3/8" NPT(F) RPM: 1725 Drive Type(s): Direct Material: 316 Stainless Steel

Cat Pump 2SFQ29SEEL Direct Drive Plunger Pump This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.   Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.   Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.   Technical Specifications Max Flow: 2.85 gpm / 10.8 lpm Max Pressure: 1200 Inlet Port Size: 3/8" NPT(F) Discharge Port Size: 3/8" NPT(F) RPM: 1725 Drive Type(s): Direct Material: 316 Stainless Steel

Cat Pump 2SFQ35SEEL Direct Drive Plunger Pump This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings. Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers. Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation. Technical Specifications Max Flow: 3.5 gpm / 13.2 lpm Max Pressure: 1200 Inlet Port Size: 3/8" NPT(F) Discharge Port Size: 3/8" NPT(F) RPM: 1725 Drive Type(s): Direct Material: 316 Stainless Steel

Cat Pumps 2SF22ES Direct Drive Plunger Pump Pump Features:   • UNIFLOW design provides continuous fluid flow forward through the pump, reduces cavitation risk and increases pump life • Unique spring loaded inlet valves and the flow through ceramic plungers allow excellent suction capabilities. • Ultimate portability, less than 11 pounds, less than 10" long • Regulating unloader is standard on each pump to assure system pressure control and pump protection   Specifications:   • Triplex plunger pump • Direct drive with electric flange • Maximum volume: 2.0 GPM • Maximum discharge pressure: 1200 PSI • Maximum inlet pressure: 75 PSI • Maximum pump speed: 3450 RPM • Minimum horsepower requirements: 1.6 BHP • Bore: .708" (18mm) • Stroke: .122" (3.1mm) • Crankcase capacity: 11 oz. use CAT pump hydraulic oil • Inlet port: 3/8" FPT • Discharge ports: Dual 3/8" FPT • By-pass port: 1/4" FPT • Dimensions: 9.13" x 6.65" x 6.50"  

Cat Pump Seal Case Bb

Cat Pump Seal Case Lps Bb

Cat Pump 2SF10ES Direct Drive Plunger Pump This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with brass manifolds, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.   2SF Series pumps are hollow-shafted and designed to bolt directly to either a C-face electric motor or gas engine, depending on the model, providing an easy, compact installation.   Technical Specifications Max Flow: 1 gpm / 3.8 lpm Max Pressure: 2000 Inlet Port Size: 3/8" NPT(F) Discharge Port Size: 3/8" NPT(M) RPM: 3450 Drive Type(s): Direct Material: Brass