Cat Pump 6029 Pulsation Dampener-Rechargeable THIS IS HAZMAT - CAN NOT SHIP BY AIR, THIS WILL ONLY SHIP GROUND   This pulsation dampener is designed to reduce pressure fluctuations or pulsation common in all positive displacement pump systems. Only the Lower Body is 316SS. It must be nitrogen pre-charged prior to installation on the discharge side of the pump. It will prolong the life of the pump and system components by reducing pulsation to + or- 3%. This is constructed of 316SS Lower Body with an NBR bladder for special fluid compatibility.   Technical Specifications Max Flow: 15 gpm / 56.8 lpm Max Pressure: 3000 psi Inlet Port Size: 1/2" NPT(M) Discharge Port Size: 1/2" NPT(M) Accessory Type: Pulsation Dampeners Material: 316 Stainless Steel Bladder Material: NBR

Cat Pump 6018 Pulsation Dampener Rechargeable   THIS IS HAZMAT - CAN NOT SHIP BY AIR, THIS WILL ONLY SHIP GROUND     This pulsation dampener is designed to reduce pressure fluctuations or pulsation common in all positive displacement pump systems. It must be nitrogen pre-charged prior to installation on the discharge side of the pump. It will prolong the life of the pump and system components by reducing pulsation to + or- 3%.   Technical Specifications Max Flow: 40 gpm / 151 lpm Max Pressure: 3000 psi Inlet Port Size: 1" NPT(M) Discharge Port Size: 1" NPT(M) Accessory Type: Pulsation Dampeners Material: 316 Stainless Steel Bladder Material: NBR

Cat Pump 6028 Pulsation Dampener-Sealed THIS IS HAZMAT - CAN NOT SHIP BY AIR, THIS WILL ONLY SHIP GROUND   This pulsation dampener is designed to reduce pressure fluctuations or pulsation common in all positive displacement pump systems. This nitrogen pre-charged at the factory ready to beinstallation on the discharge side of the pump. It will prolong the life of the pump and system components by reducing pulsation to + or- 3%. This valve is sealed and comes precharged to 450 PSI for system operating pressures of 600-3000 PSI.   Technical Specifications Max Flow: 15 gpm / 57 lpm Max Pressure: 1000 psi Inlet Port Size: 1/2" NPT(M) Discharge Port Size: 1/2" NPT(M) Accessory Type: Pulsation Dampeners Material: Steel Bladder Material: NBR

Cat Pump 3520 35 Pfr Pump 35Gpm 2K Psi CAT Pumps 3520 is a triplex plunger pump designed to deliver smooth, low pulsation flows at a wide variety of pressures and flow rates. Perfect for use in continuous duty, high pressure applications including Car/Truck Wash, Industrial Cleaning, Pressure Washing, Reverse Osmosis, Water Misting and more. Exclusive high pressure seal design means seals are lubricated and cooled by the solution being pumped. Features 304SS valve assemblies and NBR (Buna-N) seals and O-rings. Dimensions:  23.86 X 18.11 X 9.72 Features Triplex design delivers high efficiency and low pulsation. Durable dual V-Packings are lubricated and cooled by pumped liquid. Pre-set Lo-Pressure seals provide secondary protection against external leaks and require no packing adjustments. Special high-density, polished, concentric plungers provide a true wear surface and extended seal life. Specially formulated Seals and V-Packings offer unmatched performance and extended life. Interchangeable inlet and discharge valves for easy servicing. Wet-end easily serviced without entering crankcase. Specifications Maximum Flow: 25 GPM Maximum Pressure: 2000 PSI Maximum Temperature: 140° F RPM: 870 Inlet Port: 1.5" NPT-F Outlet Port: 1" NPT-F

Cat Pump 280.0110 Piston Pump 3 Frame This triplex (three piston rods) positive displacement, reciprocating piston pump is constructed with chrome-plated brass manifolds, 304 stainless steel valve assemblies, and chrome-plated 304 stainless steel sleeves and cylinders. Multiple piston cup and seal configurations are available with NBR (Buna-N) O-rings.   The lower RPM belt drive design provides strong inlet suction and long-lasting pump and seal life.   Technical Specifications Max Flow: 3 gpm / 11.4 lpm Max Pressure: 1000 Inlet Port Size: 1/2" NPT(F) Discharge Port Size: 3/8" NPT(F) RPM: 1330 Drive Type(s): Belt, Clutch Material: Brass

Cat Pump 430.011 Piston Pump 4 Frame This triplex (three piston rods) positive displacement, reciprocating piston pump is constructed with chrome-plated brass manifolds, 304 stainless steel valve assemblies, and chrome-plated 304 stainless steel sleeves and cylinders. Multiple piston cup and seal configurations are available with NBR (Buna-N) O-rings. The lower RPM belt drive design provides strong inlet suction and long-lasting pump and seal life. Technical Specifications Max Flow: 5 gpm / 18.9 lpm Max Pressure: 1000 Inlet Port Size: 1/2" NPT(F) Discharge Port Size: 3/8" NPT(F) RPM: 1040 Drive Type(s): Belt, Clutch Material: Brass

Cat Pump 6775-ADP Plunger Pump 60 Frame This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with chrome-plated nickel aluminum bronze manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.   Technical Specifications Max Flow: 75 gpm / 283.9 lpm Max Pressure: 1200 Inlet Port Size: 2" NPT(F) Discharge Port Size: 1 1/4" NPT(F) RPM: 650 Drive Type(s): Belt Material: Brass   Ships by Truck Only

Cat Pump 6013 Rechargeable Pulsation Dampener   THIS IS HAZMAT - CAN NOT SHIP BY AIR, THIS WILL ONLY SHIP GROUND     Maximum Flow 40 gpm 151 lpm Maximum Working Pressure 2000 psi 138 bar Precharge 450 psi 31 bar Operating Temp. Range (6013) +5° to 300°F –15 to 149°C Operating Temp. Range (6016) +5° to 180°F –15 to 82°C Volume 45 cu. in. 0.74 l Safety Factor 4/1 4/1 Bladder Material (6013) FPM FPM Bladder Material (6016) NBR NBR Port Size – Male 1" NPT 1" NPT Diameter 4.44" 113 mm Length 7.79" 198 mm Weight 6.28 lbs. 2.8 kg   Please allow about Two Weeks Lead Time

Cat Pump 6014 Rechargeable Pulsation Dampener   THIS IS HAZMAT - CAN NOT SHIP BY AIR, THIS WILL ONLY SHIP GROUND     This pulsation dampener is designed to reduce pressure fluctuations or pulsation common in all positive displacement pump systems. It must be nitrogen pre-charged prior to installation on the discharge side of the pump. It will prolong the life of the pump and system components by reducing pulsation to + or- 3%. This is constructed of 316SS with an NBR bladder for special fluid compatibility.   Technical Specifications Max Flow: 25 gpm / 95 lpm Max Pressure: 2400 psi Inlet Port Size: 3/4" NPT(M) Discharge Port Size: 3/4" NPT(M) Accessory Type: Pulsation Dampeners Material: 316 Stainless Steel Bladder Material: NBR

Cat Pump 310 Plunger Pump 5 Frame This pump is made for continuous duty operation. It requires little to no maintenance and is great for many cycles of a car wash. This triplex designed pumps offer high efficiency and low pulsation. Mounting kits and rails are not included and must be ordered separately.   Pump Features Lubricated high pressure seals are durable and cooled by pump liquid Double protection provided by pre-set lo-pressure seals that prevent external leaks No packing adjustment required Drive type: belt   Pump Technical Specs Max Flow: 4 GPM Pressure Range: 100 - 2200 PSI Inlet Pressure Range: -5 to 60 PSI (-0.35 to 4 bar) RPM: 950

Cat Pump Flange Mount Use the CAT Pumps 8021 Assembly to safely mount a 3-frame pump. This is an OEM CAT Pumps accessory.   Used with CAT Pumps 230, 240, 270 pump models Genuine CAT Pumps component

Cat Pump Electric Adptor Mount for 3 & 5Hp The CAT Pump 08022 is a motor flange for CAT 5 Frame pumps with hollow shafts, including the 8026ES, 8027ES, 8028ES, and 8029ES pumps. For connection to 3HP and 5HP power sources. Genuine CAT accessory, guaranteed to fit. Exact replacement part, don't have to worry about tweaks or adjustments OEM parts guarantee use of correct materials for increased longevity OEM parts come with manufacturer support Check with pump manual to ensure correct part number

Cat Pump 1K303 Submersible Pumps 1K Series – Submersible Sump Pumps Stainless steel submersible sump pumps offer solutions to pumping semi-dirty water or fresh water with suspended solids up to 3/8".   Flow Range Up to 88 gpm Pressure Range (up to 24 PSI) 55 ft. Head RPM 3450 rpm Discharge Fitting 1-1/4", 1-1/2" NPT(F) Horsepower 1/3, 1/2, 3/4, 1, 1-1/2 HP Operation Manual or Automatic Maximum Temperature Continuous 122°F Intermittent 140°F Maximum Solids Diameter 3/8"

Cat Pump 89778 Stud CAT Pumps 89778 Retainer Stud is made with 316 stainless steel and fits on 3535, 3545, and other 35FR pumps. Compatible with 35-frame pumps 316 stainless steel construction M7 x 135 Genuine CAT Pumps OEM factory part - guaranteed fit and function Use With These Pumps: 3501 3501C 3507 3507C 3511 3511C 3517 3517C 3520 3520C 3527 3531D 3531C 3535 3535C 3537 3541C 3541D 3545 3547 3570 3570S 3570C

Cat Pump 92674 Rail Kit The CAT 92674 is a pump rail mount kit for CAT 35 Frame and 38 Frame pumps. Genuine CAT Pumps part, guaranteed to fit. Use to easily mount pumps in place or replace damaged mounts during maintenance or repairs. Exact replacement part, don't have to worry about tweaks or adjustments OEM parts guarantee use of correct materials for increased longevity OEM parts come with manufacturer support Check with pump manual to ensure correct part number