OEM style featuring clean-looking black dials with white and red graphics and through-dial and perimeter lighting for optimum readability. Scratch resistant domed glass lens.

Professional Red 2" Water Pressure Gauge (0 to 30 PSI) The Faria Beede Professional Red features perimeter-lighted Black dial with stylish Red and White graphics, Black aluminum bezel, tear- drop White pointer and flat glass lens. 2"- Hole Size: 2.0625" (53mm) Specifications: Flat Glass Anti-fog, Scratch Resistant Lens Black Aluminum Bezel LED Illuminating around the Perimeter of the Dial Tear Drop White Pointer Factory P/N OP1057 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

OEM Style instruments with crisp tan details and fire orange pointer tip, providing a unique look for any dash. Scratch resistant domed glass lens with combined red through-dial and white perimeter lighting for great readability day or night.

Stylish stainless steel bezel design, black on white graphics. Domed glass sheds water and resists scratching. A comprehensive family of instruments for outboards, stern drives and inboards, including diesels. Lido instruments feature crisp white dials and fire-orange pointer tips. Red through-dial and white perimeter lighting for great night readability. NOTE: Mariner 30 & 40 HP 2-cylinder engines require a module (Merc. part no. 17461A2) when using Lido tachometer.

Water Booster System - 40 PSI - 4.5GPM - 12V The Flojet 2840 Series Booster Systems are designed to provide constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 GPM at 10 psi (0.7 bar). The pump is fully automatic, with a built-in inlet strainer, pressure switch, and check valve, and supplies smooth flow from trickle to full flow. Typical uses include applications where available water pressure is very low and fluctuates widely. Easy installation requires only that the water lines be connected, and the power cord plugged in. Features: Integrated pump and tank system It can be mounted vertically or horizontally Flow rates up to 4.5 US Gallons/min. Kit Consists of: 12V Quad MPU, 4.5 GPM, SW 40, 0.77 gal capacity accumulator tank, plastic mounting board, and pump inlet strainer WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Platinum 2" Water Pressure Gauge - 30 PSI Faria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.   All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment.   A pressure gauge operates by sending a low amperage current through the gauges's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc... As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure. 2"- Hole Size: 2.0625" (53mm) Specifications: Domed Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Blue LED Illuminating around the Perimeter of the Dial Illuminated Backlit Fire-Orange Tip Pointer Factory P/N OP1177 *Sold as an Individual *Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Kronos 2" Water Pressure Gauge Kit - 30 PSI Polished Stainless Steel bezel, flat glass lens, perimeter lighted spun aluminum dial with Gold and Black graphics. Gold increments and Logo on dial are Embossed.  All instruments include two piece Newport pointer with White hub.  A pressure gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc... As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure. 2" - Hole size: 2.0625" (53mm) Specifications: Flat Scratch Resistant Lens Polished Stainless Steel bezel LED Illuminating around the Perimeter of the Dial Newport style White Pointer Dual Scale - Imperial and Metric In the Box: 2” 30 PSI Kronos SS Water Pressure gauge 1/8” NPT Adapter w/locktite VS 516 Mounting hardware 15’ Tubing Factory P/N OP1171 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Newport SS 2" Oil Pressure Gauge - 0 to 80 PSI  The Newport Stainless Steel (SS) family of marine gauges is a classic style of gauge, engineered to be the new Modern Retro.   Designed with the latest fog resistant features, this Retro Style gauge far surpasses all expectations.  Perimeter lighting makes reading these gauges easy to read Day/Night.  Features:  Perimeter lighted Retro White Dial Black and Gray Graphics  Domed fog resistant lens  Two-piece Black pointers  Hand-polished Stainless Steel bezel Studded connection for ring terminals Red illuminated edge-lighting Technical Specifications:  Operating Range  - 0 to 80 PSI 2.06" (53 mm) Mounting hole Operating Voltage - 12/24 V In the box: Gauge Mounting Hardware Installation Manual Factory P/N GP8159 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Chesapeake Black 2" Water Pressure Gauge  (30 PSI) Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens. A pressure gauge operates by sending a low amperage current through the gauges's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc... As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure. 2" - Hole size: 2.0625" (53mm) Specifications: Anti-scratch glass lens Perimeter lighted back light 12 VDC negative ground Can be adapted for 24 VDC systems Dual Scale - Metric and Imperial Factory P/N OP1018 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Chesapeake White SS 2" Water Pressure Gauge (30 PSI) Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens. A pressure gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc... As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure. 2" - Hole size: 2.0625" (53mm) Specifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life 12 VDC negative ground Can be adapted for 24 VDC systems Dual Scale - Imperial and Metric Factory P/N OP1022 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Dress White 2" Water Pressure Gauge (30 PSI) Perimeter-lighted White dial with bold Black graphics, White aluminum bezel, contoured Black pointer and flat glass lens. A pressure gauge operates by sending a low amperage current through the gauges's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc... As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure. 2" - Hole size: 2.0625" (53mm) Specifications: Anti-scratch glass lens 12 VDC negative ground Can be adapted for 24 VDC systems Dual Scale - Metric and Imperial Factory P/N OP1006 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Euro White 2" Water Pressure Gauge (30 PSI) Perimeter-lighted White dial with bold Black graphics, Black aluminum bezel, contoured White pointer and flat glass lens. A pressure gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc... As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure. 2" - Hole size: 2.0625" (53mm) Specifications: Anti-scratch glass lens Perimeter-lighted White dial 12 VDC negative ground Can be adapted for 24 VDC systems Dual Scale - Metric and Imperial Factory P/N OP1005 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Par-Max 2 Water Pressure Pump - 24V - 2 GPM - 35 PSI HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance.  Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion.  Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Newport SS 2" Oil Pressure Gauge - 0 to 100 PSI The Newport Stainless Steel (SS) family of marine gauges is a classic style of gauge, engineered to be the new Modern Retro.   Designed with the latest fog resistant features, this Retro Style gauge far surpasses all expectations.  Perimeter lighting makes reading these gauges easy to read Day/Night.  Features:  Perimeter lighted Retro White Dial Black and Gray Graphics  Domed fog resistant lens  Two-piece Black pointers  Hand-polished Stainless Steel bezel Studded connection for ring terminals Red illuminated edge-lighting Technical Specifications:  Operating Range  - 0 to 100 PSI 2.06" (53 mm) Mounting hole Operating Voltage - 12/24 V In the Box: Gauge Mounting Hardware Installation Manual Factory P/N GP8185 *Sold as an Individual ** Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Ideal for outboards and stern drives. Features polished stainless steel bezel, brushed aluminum dial with black pointer, scratch resistant curved lens and perimeter lighting. US & metric scales with ISO symbols where appropriate. 3" gauge requires 3-13/32" cutout, 2" gauge requires 2-1/8" cutout.