OMC 400 type cable (Pre 1979). Stainless steel core. Stainless steel and brass fittings. Exceeds engine manufacturers specifications. 6" minimum bend radius.

2018 Jeep Wrangler JL A-Pillar Mount for 2 D-Series, D-SS, SR-M or Ignite Lights The 2018 Jeep Wrangler JL can go anywhere that you can take it, shouldn’t its auxiliary lighting options do the same? The all new Wrangler JL A-Pillar mount by RIGID gives that extra lighting needed for those dark times.  With the ability to attach several different RIGID lighting options from the D-Series, D-SS, SR-M, or Ignite families, the RIGID Jeep Wrangler A-Pillar mount takes auxiliary lighting to a new level. These mounts are made from laser cut stainless steel and have been powder coated allowing for a clean sleek look. Own The Night with the RIGID mounts for your Jeep Wrangler JL.  Lights sold separately.  In the Box: All Necessary Hardware ∗ Sold as a Pair

Xtreme® premium control cables provide smooth, easy action with minimum lost motion. Superior feel at the controls, especially in multi-station vessels. Patented splined core with ridges that allow a close fit with the cable's inner liner, but with minimum contact so the core glides back and forth smoothly. .34" super tough HDPE jacket for ultimate protection from the elements.

Replacement rotary steering cable with simple snap-in connection. Direct replacement for SSC61 and SSC72 cables. Stainless steel core.

Drop-in replacement cable for Mercury/Mercruiser engines using 600A type cable. Splined core allows easy movement and minimum lost motion. Designed for complex and/or long cable runs, or to simply create a superior feel. Stainless steel fittings and cable wire. 4" min. bend radius. Packed one per box.

Drop-in replacement cable for OMC outboard and I/O engines using 479 type cable. Splined core allows easy movement and minimum lost motion. Designed for complex and/or long cable runs, or to simply create a superior feel. Stainless steel fittings and cable wire. 4" min. bend radius. Packed one per box.

8' Wide Band Antenna with 20' Cable Utilizing technology designed for military and commercial applications, Digital Antenna delivers our new, highly advanced 8' Wide Band VHF Antennas to the marine industry. These antennas provide tactical maritime users with a high-performance solution for broadband VHF communications. Featuring a tremendous bandwidth of 134 to 176 MHz, a nominal 6dB gain, and the ability to withstand continuous RF power up to 150 watts, the new antennas facilitate high-quality communications across a normally hard-to-cover band. An exclusive patent-pending electrical design with an internal ground plane allows the antenna to maintain a low radiation pattern, resulting in exceptional communication capability over a wide bandwidth. Designed to meet the military’s rigorous MIL-STD-810 environmental engineering testing, as well as typical marine standards for high seas applications, the 992-MW and 992-MB antennas, are built to endure environmentally harsh conditions. They are designed for use with a multitude of services including auxiliary civil services, 2-meter amateur radio band, VHF business band, multi-use radio service (MURS), 2-way land mobile, VHF marine radio, narrowband FM, VHF SATCOM, Automatic Identification System (AIS) and NOAA weather stations. Digital Antenna’s quality components include a rugged hard-coated anodized finish over an aircraft-grade aluminum ferrule, soldered brass radiating elements, power directing ferrite choke bead, and high-gloss UV stable coating. Manufactured in the USA by skilled craftsmen, our antennas are hand tested and tuned to assure the highest possible performance, quality, and durability. Lifetime limited warranty. Features: Broadband 134-176 MHz Withstands continuous RF power up to 150 watts Aircraft-grade aluminum ferrule Completely sealed High performance 6dB gain Sleek mono-color design Lifetime limited warranty Mount: Standard 1”–14 threaded base Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter Cable: Includes 20’ exclusive low-loss, tinned braid, foil shielded, UV stable DA195 Ultra-Flex marine cable

Mercury/Mercruiser 600A type cable. Complete drop-in replacement cable for Mercury/Mercruiser engines. Stainless steel & brass fittings. Stainless cable wire. WHILE QUANTITIES LAST.

OMC 479 type cable (1979 & later). Complete drop-in replacement cable for OMC O/B and I/O's. Stainless steel and brass fittings. 6" minimum bend radius. WHILE QUANTITIES LAST.

3" travel, 10-32 thread stainless steel ends. Stainless 16 strand Lubri-Core wire for smooth operation. 6" minimum bend radius. Stainless steel rods, hubs, and end fittings. Covered core wires with moisture protective seals help protect against corrosion and lengthen cable life. UV resistant polyethylene outer jacket resists abrasion and withstands effects of salt water, chemicals, gasoline, and oil.

Drop-in replacement cable for engines with controls that accept cable with 10-32 threaded ends. Mercury Sport Jet requires connection kit #CA27319P for engine end. Stainless steel conduit fittings. 3" nominal travel. 4" minimum bend radius. Packed one per box.

RJ45-M Ethernet Adapter Cable RJ45-Yellow Round Ethernet adapter cable for Simrad NSO evo2 and Zeus2 displays.

SCM-4 LED Underwater Light w/20' Cable - 316 SS Housing - Great White With four LEDs, this compact underwater light is the perfect addition to every vessel. Available in any of our five colors, the SCM-4 works with our Wireless Controller and Power Distribution Box for ease of use and installation. High Intensity Shadow-Caster underwater LED lights are designed to deliver the most intense optical output. Our unique design allows us to produce maximum light output and maximum LED life (over 40,000 hours). Robust Design With Shadow-Caster underwater LED lights, there's no additional external components to install. Just connect the cable (submersible to 20 feet). All the necessary electronics are integrated into the housing and resistant to vibration and the elements. Surface Mounted Our lighting solutions feature a low profile design that requires noalteration to the main hull Wide Input Voltage Range Shadow-Caster's underwated LED lights have an input range of 10 to 30 volts and work equally well on sets of 12 or 24 volts. Surge and Reverse Polarity Protection Our lighting systems have an innovative protection system that automatically disconnects the input entry when excessive voltage or reverse polarity is detected. Thermal Protection Our unique thermal protection features a control system that detects internal temperature and adjusts energy production down to avoid damage. Specifications: Size: 5.8" Length x 2.375" Width x 0.5" Height (147 x 60 x 13mm) Operating Voltage: 10 - 30 Volts DC with consistent brightness Current Draw: 1.4 Amps @ 12 Volts Internal high efficiency digital switching power supply 17 Watts of high efficiency LED light 40,000-Hour Lamp Life 120° light spread angle 316 Stainless Steel Housing with Polycarbonate Lens 20' (6M) Standard Cable Length 1-Year Warranty Made in the USA WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SCM-10 LED Underwater Light w/20' Cable - 316 SS Housing - Bimini Blue With ten high-intensity LEDs, the SCM-10 underwater light is our most popular model. The SCM-10 is the perfect addition to every vessel and dock. The SCM-10 works with our Wireless Controller and Power Distribution Box for ease of use and installation. High Intensity Shadow-Caster underwater LED lights are designed to deliver the most intense optical output. Our unique design allows us to produce maximum light output and maximum LED life (over 40,000 hours). Robust Design With Shadow-Caster underwater LED lights, there's no additional external components to install. Just connect the cable (submersible to 20 feet). All the necessary electronics are integrated into the housing and resistant to vibration and the elements. Surface Mounted Our lighting solutions feature a low profile design that requires noalteration to the main hull Wide Input Voltage Range Shadow-Caster's underwated LED lights have an input range of 10 to 30 volts and work equally well on sets of 12 or 24 volts. Surge and Reverse Polarity Protection Our lighting systems have an innovative protection system that automatically disconnects the input entry when excessive voltage or reverse polarity is detected. Thermal Protection Our unique thermal protection features a control system that detects internal temperature and adjusts energy production down to avoid damage. Specifications: Size: 10" Length x 2.375" Width x 0.5" Height (254 x 60 x 13mm) Operating Voltage: 10 - 30 Volts DC with consistent brightness Current Draw: 3.5 Amps @ 12 Volts Internal high efficiency digital switching power supply 42 Watts of high efficiency LED light 40,000-Hour Lamp Life 120° light spread angle 316 Stainless Steel Housing with Polycarbonate Lens 20' (6M) Standard Cable Length 1-Year Warranty Made in the USA WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SCM-10 LED Underwater Light w/20' Cable - 316 SS Housing - Great White With ten high-intensity LEDs, the SCM-10 underwater light is our most popular model. The SCM-10 is the perfect addition to every vessel and dock. The SCM-10 works with our Wireless Controller and Power Distribution Box for ease of use and installation. High Intensity Shadow-Caster underwater LED lights are designed to deliver the most intense optical output. Our unique design allows us to produce maximum light output and maximum LED life (over 40,000 hours). Robust Design With Shadow-Caster underwater LED lights, there's no additional external components to install. Just connect the cable (submersible to 20 feet). All the necessary electronics are integrated into the housing and resistant to vibration and the elements. Surface Mounted Our lighting solutions feature a low profile design that requires noalteration to the main hull Wide Input Voltage Range Shadow-Caster's underwated LED lights have an input range of 10 to 30 volts and work equally well on sets of 12 or 24 volts. Surge and Reverse Polarity Protection Our lighting systems have an innovative protection system that automatically disconnects the input entry when excessive voltage or reverse polarity is detected. Thermal Protection Our unique thermal protection features a control system that detects internal temperature and adjusts energy production down to avoid damage. Specifications: Size: 10" Length x 2.375" Width x 0.5" Height (254 x 60 x 13mm) Operating Voltage: 10 - 30 Volts DC with consistent brightness Current Draw: 3.5 Amps @ 12 Volts Internal high efficiency digital switching power supply 42 Watts of high efficiency LED light 40,000-Hour Lamp Life 120° light spread angle 316 Stainless Steel Housing with Polycarbonate Lens 20' (6M) Standard Cable Length 1-Year Warranty Made in the USA WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.