|
Replacement for SS152 Dual cable system.
|
692.99 |
|
|
SP-120 Color System with Rudder Feedback & Type "S" Mechanical Dash Drive
Features:
The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control
Does not require a separate junction box, everything simply connects to the rear of the control head
This Autopilot is ideal for small vessels under 38'
The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels
SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously
Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display
Extremely easy to select your desired headings, operate, and setup, with new user friendly software
High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response
Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to
enhance performance
NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes
NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay
Autopilot Steering Modes:
Manual (Power Steer)
Auto (Pilot maintains selected Magnetic course)
GPS (Steers to Waypoint or Routes when Interfaced with GPS)
Wind (Steers to wind when interfaced to wind sensor for Sailboat installations)
Protected by 2 Year SI-TEX Warranty
Specifications:
Waterproof: IPX6
Control Head Dimensions: 110 mm L x 110 mm W
Voltage supply VOLTAGE: 12/24 Volts DC
LCD Color LCD Display
Constant Compass Heading Indicator and Rudder Angle Indicator
Current consumption: 0.5 amps at 12VDC in standby mode
Maximum Drive Output Current 15 Amps
Operating temperature: -10ºC to +55ºC
Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output
Course Detection <1 Degree
Package Includes:
SI-TEX SP-120C Color LCD Autopilot Control Head
NMEA Interface Cables
9 Axis Electronic Rate Gyro Compass
Control Head Sun cover
Product manual
Mounting Screws
|
2977.70 |
|
|
SP-120 Color System with Rudder Feedback & Type "T" Mechanical Dash Drive
Features:
The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control
Does not require a separate junction box, everything simply connects to the rear of the control head
This Autopilot is ideal for small vessels under 38'
The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels
SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously
Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display
Extremely easy to select your desired headings, operate, and setup, with new user friendly software
High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response
Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to
enhance performance
NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes
NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay
Autopilot Steering Modes:
Manual (Power Steer)
Auto (Pilot maintains selected Magnetic course)
GPS (Steers to Waypoint or Routes when Interfaced with GPS)
Wind (Steers to wind when interfaced to wind sensor for Sailboat installations)
Protected by 2 Year SI-TEX Warranty
Specifications:
Waterproof: IPX6
Control Head Dimensions: 110 mm L x 110 mm W
Voltage supply VOLTAGE: 12/24 Volts DC
LCD Color LCD Display
Constant Compass Heading Indicator and Rudder Angle Indicator
Current consumption: 0.5 amps at 12VDC in standby mode
Maximum Drive Output Current 15 Amps
Operating temperature: -10ºC to +55ºC
Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output
Course Detection <1 Degree
Package Includes:
SI-TEX SP-120C Color LCD Autopilot Control Head
NMEA Interface Cables
9 Axis Electronic Rate Gyro Compass
Control Head Sun cover
Product manual
Mounting Screws
|
3058.20 |
|
|
SP-120 Color System with RFB & Remote Mechanical Drive 1994+ Mercury I/O, Volvo Gas
Features:
The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control
Does not require a separate junction box, everything simply connects to the rear of the control head
This Autopilot is ideal for small vessels under 38'
The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels
SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously
Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display
Extremely easy to select your desired headings, operate, and setup, with new user friendly software
High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response
Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to
enhance performance
NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes
NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay
Autopilot Steering Modes:
Manual (Power Steer)
Auto (Pilot maintains selected Magnetic course)
GPS (Steers to Waypoint or Routes when Interfaced with GPS)
Wind (Steers to wind when interfaced to wind sensor for Sailboat installations)
Protected by 2 Year SI-TEX Warranty
Specifications:
Waterproof: IPX6
Control Head Dimensions: 110 mm L x 110 mm W
Voltage supply VOLTAGE: 12/24 Volts DC
LCD Color LCD Display
Constant Compass Heading Indicator and Rudder Angle Indicator
Current consumption: 0.5 amps at 12VDC in standby mode
Maximum Drive Output Current 15 Amps
Operating temperature: -10ºC to +55ºC
Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output
Course Detection <1 Degree
Package Includes:
SI-TEX SP-120C Color LCD Autopilot Control Head
NMEA Interface Cables
9 Axis Electronic Rate Gyro Compass
Control Head Sun cover
Product manual
Mounting Screws
|
3380.20 |
|
|
SP-120 Color System with RFB & Remote Mechanical Drive 1983-93 Mercury I/O, Volvo Diesel
Features:
The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control
Does not require a separate junction box, everything simply connects to the rear of the control head
This Autopilot is ideal for small vessels under 38'
The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels
SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously
Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display
Extremely easy to select your desired headings, operate, and setup, with new user friendly software
High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response
Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to
enhance performance
NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes
NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay
Autopilot Steering Modes:
Manual (Power Steer)
Auto (Pilot maintains selected Magnetic course)
GPS (Steers to Waypoint or Routes when Interfaced with GPS)
Wind (Steers to wind when interfaced to wind sensor for Sailboat installations)
Protected by 2 Year SI-TEX Warranty
Specifications:
Waterproof: IPX6
Control Head Dimensions: 110 mm L x 110 mm W
Voltage supply VOLTAGE: 12/24 Volts DC
LCD Color LCD Display
Constant Compass Heading Indicator and Rudder Angle Indicator
Current consumption: 0.5 amps at 12VDC in standby mode
Maximum Drive Output Current 15 Amps
Operating temperature: -10ºC to +55ºC
Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output
Course Detection <1 Degree
Package Includes:
SI-TEX SP-120C Color LCD Autopilot Control Head
NMEA Interface Cables
9 Axis Electronic Rate Gyro Compass
Control Head Sun cover
Product manual
Mounting Screws
|
3387.23 |
|
|
SP-120 Color System with RFB & Remote Mechanical Drive Inboard Engines
Features:
The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control
Does not require a separate junction box, everything simply connects to the rear of the control head
This Autopilot is ideal for small vessels under 38'
The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels
SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously
Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display
Extremely easy to select your desired headings, operate, and setup, with new user friendly software
High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response
Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to
enhance performance
NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes
NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay
Autopilot Steering Modes:
Manual (Power Steer)
Auto (Pilot maintains selected Magnetic course)
GPS (Steers to Waypoint or Routes when Interfaced with GPS)
Wind (Steers to wind when interfaced to wind sensor for Sailboat installations)
Protected by 2 Year SI-TEX Warranty
Specifications:
Waterproof: IPX6
Control Head Dimensions: 110 mm L x 110 mm W
Voltage supply VOLTAGE: 12/24 Volts DC
LCD Color LCD Display
Constant Compass Heading Indicator and Rudder Angle Indicator
Current consumption: 0.5 amps at 12VDC in standby mode
Maximum Drive Output Current 15 Amps
Operating temperature: -10ºC to +55ºC
Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output
Course Detection <1 Degree
Package Includes:
SI-TEX SP-120C Color LCD Autopilot Control Head
NMEA Interface Cables
9 Axis Electronic Rate Gyro Compass
Control Head Sun cover
Product manual
Mounting Screws
|
3219.20 |
|
|
SP-120 System with Rudder Feedback & Type "S" Mechanical Dash Drive
The SP-120 autopilot control system comprises the following units:
SP-120 display and control head
SI-TEX 9 Axis rate compass
Rudder Feedback Unit (SP-120R only)
In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.
A rudder actuator system comprises one of the following:
Hydraulic system with helm pump and ram
Mechanical steering system
The autopilot should be connected to one of the following:
Reversing motor/pump set connected into the existing hydraulic steering system
Reversing mechanical drive unit connected to the existing steering mechanism
Electronic Hydraulic Solenoid Valves
|
2816.70 |
|
|
SP-120 System with Rudder Feedback & Type "T" Mechanical Dash Drive
The SP-120 autopilot control system comprises the following units:
SP-120 display and control head
SI-TEX 9 Axis rate compass
Rudder Feedback Unit (SP-120R only)
In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.
A rudder actuator system comprises one of the following:
Hydraulic system with helm pump and ram
Mechanical steering system
The autopilot should be connected to one of the following:
Reversing motor/pump set connected into the existing hydraulic steering system
Reversing mechanical drive unit connected to the existing steering mechanism
Electronic Hydraulic Solenoid Valves
|
2897.20 |
|
|
SP-120 System with Rudder Feedback & Remote Mechanical Drive - 1994 + Mercury IO/Volvo Gas
The SP-120 autopilot control system comprises the following units:
SP-120 display and control head
SI-TEX 9 Axis rate compass
Rudder Feedback Unit (SP-120R only)
In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.
A rudder actuator system comprises one of the following:
Hydraulic system with helm pump and ram
Mechanical steering system
The autopilot should be connected to one of the following:
Reversing motor/pump set connected into the existing hydraulic steering system
Reversing mechanical drive unit connected to the existing steering mechanism
Electronic Hydraulic Solenoid Valves
|
3219.20 |
|
|
SP-120 System with Rudder Feedback & Remote Mechanical Drive - 1983-93 Mercury IO/Volvo Diesel
The SP-120 autopilot control system comprises the following units:
SP-120 display and control head
SI-TEX 9 Axis rate compass
Rudder Feedback Unit (SP-120R only)
In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.
A rudder actuator system comprises one of the following:
Hydraulic system with helm pump and ram
Mechanical steering system
The autopilot should be connected to one of the following:
Reversing motor/pump set connected into the existing hydraulic steering system
Reversing mechanical drive unit connected to the existing steering mechanism
Electronic Hydraulic Solenoid Valves
|
3310.23 |
|
|
For use with Adjustable Tie Bars on standard Dometic steering cylinders. Allows the consumer to take full advantage of all the features and benefits of the heavy-duty adjustable tie bar products for twin engine applications up to 600 HP. Utilizes Tournament series adjustable tie bars. High strength, forged aluminum. Eliminates need for cut-to-length traditional tie bars.
|
229.99 |
|
|
For use with Adjustable Tie Bars on standard Dometic steering cylinders. Allows the consumer to take full advantage of all the features and benefits of the heavy-duty adjustable tie bar products for twin engine applications up to 600 HP. Utilizes Tournament series adjustable tie bars. High strength, forged aluminum. Eliminates need for cut-to-length traditional tie bars.
|
238.99 |
|
|
Smoother and lower effort steering system. Quick connect feature on both cable and spent travel tube side. No tools required to snap steering cable or spent travel tube in place. Easy system installation, single steering cable to route with standard 8" bend radius. Fits standard dash cut out for Safe-T and 4.2 bracket. Gear train is custom designed to allow the smallest foot print with the lowest effort available in a mechanical Helm. Improved NFB clutch "feel" to allow smoother clutch release. Includes NFB helm, bezel and Xtreme cable.
|
433.99 |
|
|
No-Feedback single cable steering system designed for V-6 and smaller engines. 4.2 turns lock-to-lock with patented NFB technology for the easiest steering ever. Replaces standard Safe-T system without dash modification, accepts Standard 3/4" tapered steering shaft. Package includes NFB helm, QC cable with stainless steel output ends, and 90° NFB rotary bezel.
|
369.99 |
|
|
Sierra replacement power steering pumps and pulleys for Mercruiser engines.
|
93.99 |
|