|
Specifically designed to be used on smaller commercial fishing vessels. Features stainless steel shaft, heavy duty shaft seal and wiper. Shaft and seal help protect the pump from the abrasive effects of sediment that is brought on board by the operator handling traps or pots. 1000 PSI relief valve setting. Adjustable stainless steel ORB O-ring fittings simplify installation and allow simple reorientation of fittings after installation. Anodized rear cover, anodized black port plugs.
|
1135.99 |
|
|
Adjustable stainless steel ORB O-ring fittings simplify installation and allow simple reorientation of fittings after installation. Anodized rear cover, anodized black port plugs. Designed specifically for SeaStar hydraulic steering systems.
|
939.99 |
|
|
Seal kits for Baystar and SeaStar helm pumps.
|
75.99 |
|
|
Steer Stop Outboard Hydraulic Steering Lock Set - 4"
T-H Marine developed the first steering stop available for outboard motors and now we've revised that design so it stands apart from imitation and performs better than any other on the market.
With our 4" Steer Stop Outboard Hydraulic Steering Lock in place, boaters can center their outboard motor equipped with hydraulic steering and keep it from wandering when trailering. Similar to the original Steer Stop, units clip onto hydraulic steering rams on either side of outboard to keep engine straight and prevent damage to motor supports. The cord then keeps units together when stowed and aids removal.
Additionally, with the new grip built into the design, it is easier than ever to install and remove the Steer Stop Outboard Hydraulic Steering Lock, saving you effort and wear and tear on your hands.
Features:
Must-know information about the 4" Steer Stop Outboard Hydraulic Steering Lock:
Locks hydraulic steering when trailering
Fits most steering cylinder rods on outboard engines
Snaps over outboards hydraulic steering cylinder rods
Helps keep engine centered during transport
Protects steering system, outboard, and motor supports
Includes cord to connect units for storage and to aid in removal
Grip makes it even simpler and easier to put on and take off
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
17.51 |
|
|
SilverSteer™ Front Mount Outboard Hydraulic Steering System w/ UC130-SVS-1 Cylinder
Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.
Whether a bass boat, flats boat or tournament-style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive, and precise steering.
Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders.
UC130-SVS-1 Cylinder is ideal for applications with limited space or potential pinch-points between the cylinder and transom (i.e., when tilting the motor all the way up or motors mounted on a jack plate). The end-mounted fittings keep the hydraulic hoses free and clear.
SilverSteer™ Package Kit Contains:
UC130-SVS-1 Cylinder (fittings face out from the ends of the cylinder)
|
1402.52 |
|
|
SilverSteer™ Universal Front Mount Outboard Hydraulic Steering System w/ UC128-SVS-1 Cylinder
Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.
Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering.
Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders.
SilverSteer™ Package Kit Contains:
UC128-SVS-1 Cylinder (fittings are on the face of the cylinder, between the cylinder and boat's transom)
|
1385.16 |
|
|
SilverSteer™ Outboard Hydraulic Tilt Steering System - UC130 V1
Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.
Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering.
Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.
|
1199.99 |
|
|
SilverSteer™ Outboard Hydraulic Tilt Steering System - UC130 V2
Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.
Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering.
Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.
|
1687.20 |
|
|
Adjustable stainless steel ORB O-ring fittings simplify installation and allow simple reorientation of fittings after installation. Anodized rear cover, anodized black port plugs. Designed specifically for SeaStar hydraulic steering systems.
|
1029.99 |
|
|
GoTech™ 1.0 Universal Front Mount Outboard Hydraulic Steering System
For outboard single engine up to 115hp.
Kit Contains:
UP18 - Intermediate helm pump
UC81-OBF - Front mount outboard cylinder
OL 150 - Hydraulic oil - 2 litres
KIT OB-GT-60 - Hose kit dia, 1/4" 6M(19.7") length
|
903.55 |
|
|
SilverSteer™ Universal Front Mount Outboard Hydraulic Tilt Steering System - 1500PSI V1
Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.
Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering.
Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders.
SilverSteer™ Package Kit Contains:
UC130/1-SVS Cylinder
UP25F-SVS Helm
2 Quarts of Hydraulic Oil
|
1670.20 |
|
|
SilverSteer™ 2.0 High-Performance Front Mount Outboard Hydraulic Steering System - 1500PSI FM V2
Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.
Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering.
Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.
Features:
Horsepower: Single engine, 350hp, dual engine, 600hp
Helm: 7.3 cu in/120cc
Hose: 1,500psi
Turns Lock-to-Lock: 4.3
Included Equipment: UP25 F-SVS front mount helm pump, UC128/2-SVS front mount outboard cylinder, hydraulic oil (two qts.), Hose kits sold separately
Steering Wheel: Sold separately
Steering Wheel Shaft: 3/4" tapered
Warranty: Two years
|
1199.34 |
|
|
SilverSteer™ Universal Front Mount Outboard Hydraulic Tilt Steering System - 1500PSI V2
Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.
Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering.
Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.
SilverSteer™ Package Kit Contains:
UC130/2-SVS cylinder
|
1670.20 |
|
|
SilverSteer™ Front Mount Outboard Hydraulic Steering System - UC130 V2
Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.
Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering.
Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over tightening or leaking fittings from loosening during installation, a common problem on competing cylinders.
Specifications:
Volume: 130 cc - 7.93 cu.in
Output force: 492 kg - 1085 lbs
Inside diameter: 36 nm - 1.43"
Stroke: 185 nm - 7.28"
3/8" fittings: For high pressure flex hose
Bleed fittings: DN5 quick connect
Kit Includes:
UC130-SVS 2
UP25F-SVS
2x Oil 15
|
1402.52 |
|
|
Atlas Micro Jacker Small Outboard Hydraulic Jack - 4"
SMALLEST & LIGHTEST HYDRAULIC JACK ON THE MARKET
For Small Outboards - Max Weight 425 lbs / Max Horsepower 115 HP
Great For Shallow Water Boats – Gheenoes River Runners – Jon Boats - Skiffs
Get Out of Trouble Fast – Lifts in 8 Seconds Lightweight – Only 23 Pounds Fish “Skinny Water” With Confidence Self Contained Hydraulics Maximum outboard dry weight: 425 pounds Maximum outboard horsepower: 115 HP* Only Four (4) Inch Setback Clamp-On Motor Adapter Available (optional) Small Footprint – Only 14-5/8” Wide and 11-1/2” High
Clamp-On Motor Adapter (part # AHJM-CMA-DP) allows you to mount smaller engines with clamp-on brackets to the ATLAS Micro Jacker, since they do not mount with bolts on the standard BIA engine hole pattern.
Adjustment Specifications:
With the Micro Jacker in place, you will have about 8.5” to work with in height. This includes 1.5” of adjustment at the transom, another 1.0” on the motor side, 1.0" of adjustment with the motor, and 5" of hydraulic lift with the Micro Jacker itself.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1081.27 |
|