|
Solo Hitch Alignment System
Features:
Convenient one person hitch alignment system
Magnetic base for fast and easy location
Telescoping rods adjust up to 42”
Easy to use the first time
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
41.77 |
|
|
Interchangeable Hitch Ball w/ 1" Shank - 1-7/8", 2", 2-5/16" Balls
Designed to accommodate towing multiple trailers with ease, Tow Ready Interchangeable Hitch Ball System allows you to change hitch ball sizes in seconds without any tools.
Innovative quick release changes balls in seconds
Rated capacities up to 8,000 lbs.
Durable heat treated shank
New positive latch design
No special tools required
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
78.91 |
|
|
Draw-Tite
Draw-Tite is the premier brand of custom trailer hitches. Draw-Tite provides top quality in every hitch and receiver made. Solid all-welded construction is used for maximum strength and safety. All Draw-tite hitches meet and exceed V-5 and SAE J684 standards and are inspected for quality and workmanship.
|
|
|
Trailer Hitch Receiver Extension, 2" to 2" Extension, 8" Length - 3,500 lbs.
Features:
Ideal for slide-out campers with extended overhangs
2" square tube opening for use with ball mounts and hitch-mounted accessories
WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
62.89 |
|
|
Receiver Lock 5/8" for 3" Square Class V Receivers Sleeved to 3/4' Dogbone Style
The Draw Tite 5/8 In. diameter dogbone lock is primarily designed for towing for securing class V towing ball mounts that have a 3 In. sized receiver tube.
Features:
For use with 3 In. square shanks
Class V
Bright zinc finish
4 In. span
Traditional flat key
Always write down your key number
Sleeve to 3/4 inch
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
26.45 |
|
|
Adjustable Tri-Ball Mount
Adjustable Tri-Ball Ball Mount System w/Step, 2" Sq. Shank, 1-7/8" Ball 2,000 lbs (GTW), 2" Ball 10,000 lbs. (GTW), 2-5/16" Ball 14,000 lbs. (GTW)
Features:
Adjustable height - Perfect for towing multiple trailers of varying heights and couplers
Height adjusts up to 10.5"
Rated to 14k GTW
1-7/8" (2K rating) , 2" (10K GTW), and 2-5/16" (14K GTW) Hitch balls
Fits 2" receivers and rated up to 14K GTW
Cast shank, variable height capability
Integrated hitch step with grip pattern
Knurled bolt pins with secure lanyard
Black powder coat finish
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
353.42 |
|
|
Towing Starter Kit - 2" Ball
Towing Starter Kit, w/Interlock® (Hex) Feature Ball Mount 2" Sq. x 8-1/2"L x 2"D x 3/4"R, 6000 lbs. & 2" Hitch Ball w/Lock, Plastic Storage Case
Features:
Includes 2" hitch ball
Includes receiver lock
Black powder coat finish over A-Coat
Fits 2" square receiver tube opening
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
103.30 |
|
|
5/8" Hitch Pin for 2" Square Receivers
Pin Only
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.09 |
|
|
Adjustable Dual Ball Mount
Adjustable Dual Ball Mount System, 2" Sq. Shank, 2" Ball 10,000 lbs. (GTW), 2-5/16" Ball 14,000 lbs. (GTW)
Features:
Adjustable height - Perfect for towing multiple trailers of varying heights and couplers
Height adjusts up to 10.5"
2" (10K GTW) and 2-5/16" (14K GTW) Hitch balls
Fits 2" receivers and rated up to 14K GTW
Cast shank, variable height capability
Knurled bolt pins with secure lanyard
Black powder coat finish
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
335.46 |
|
|
Draw Bar Storage Bag
Black
Don't bang your shins!
Store the draw bar and keep your vehicle clean
Remove the draw bar and hitch ball from your vehicle to prevent banging your shin. Store it conveniently in your tow vehicle. Bag is padded with a strong zipper closure. Will easily hold a 2" receiver drawbar and hitch ball with a 2" rise or a 4" drop. Made of strong 600 Denier polyester with PVC backing. Includes a carry handle and a pocket to hold hitch pin.
Size: 15"L x 6"H x 4"D
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.12 |
|
|
System Ready Panel Warning Light
The green warning L.E.D. provides constant monitoring of the fire suppression system when the ignition switch is On. Complies with U.S. Coast Guard requirements for system approval.
This 2" round indicator light has an adhesive back aluminum plate for easy panel mounting and requires a 5/16" hole for wire routing.
Standard with all pre-engineered fire extinguishing systems.
Compatible With:
MA2, CG2 and GA suppression systems
*Sold as an Individual
|
18.00 |
|
|
D-Box Feeder Case - 3600 Shallow
Daiwa’s range of tackle trays, D-Box, has been designed and developed to produce a cohesive range of purpose-built storage perfectly suited to the modern angler.
Available in a range of sizes and depths, Daiwa’s D-BOX range is made from recycled polypropylene, a low-impact material that delivers no toxic waste, no emissions, no fluorocarbons, and no halogens in its process.
All Daiwa D-Box models feature a 4-sided clasp system to ensure secure latching and to fully compress the water-resistant gasket seal, which is installed 360 degrees around the lids of all D-Box models.
Each box was carefully designed to maximize storage and versatility, with features like spinnerbait storage incorporated into the models.
Features:
4 Latches - Securely keeps the lid closed, even when the tackle box is being thrown around in the roughest conditions.
Clear Cover - Allows you to see your gear without opening the lid, making it easy to find what you need.
Customizable - Can be configured to meet your specific needs, such as adding dividers or compartments.
Waterproof Sealing - Prevent water from getting to prized tackle, keeping the gear dry.
Specifications:
Size: Medium tackle case with shallow depth
|
9.89 |
|
|
D-Box Feeder Case - 3600 Regular
Daiwa’s range of tackle trays, D-Box, has been designed and developed to produce a cohesive range of purpose-built storage perfectly suited to the modern angler.
Available in a range of sizes and depths, Daiwa’s D-BOX range is made from recycled polypropylene, a low-impact material that delivers no toxic waste, no emissions, no fluorocarbons, and no halogens in its process.
All Daiwa D-Box models feature a 4-sided clasp system to ensure secure latching and to fully compress the water-resistant gasket seal, which is installed 360 degrees around the lids of all D-Box models.
Each box was carefully designed to maximize storage and versatility, with features like spinnerbait storage incorporated into the models.
Features:
4 Latches - Securely keeps the lid closed, even when the tackle box is being thrown around in the roughest conditions.
Clear Cover - Allows you to see your gear without opening the lid, making it easy to find what you need.
Customizable - Can be configured to meet your specific needs, such as adding dividers or compartments.
Waterproof Sealing - Prevent water from getting to prized tackle, keeping the gear dry.
Specifications:
Size: Medium tackle case with regular depth
|
9.89 |
|
|
D-Box Feeder Case - 3600 Medium - Deep
Daiwa’s range of tackle trays, D-Box, has been designed and developed to produce a cohesive range of purpose-built storage perfectly suited to the modern angler.
Available in a range of sizes and depths, Daiwa’s D-BOX range is made from recycled polypropylene, a low-impact material that delivers no toxic waste, no emissions, no fluorocarbons, and no halogens in its process.
All Daiwa D-Box models feature a 4-sided clasp system to ensure secure latching and to fully compress the water-resistant gasket seal, which is installed 360 degrees around the lids of all D-Box models.
Each box was carefully designed to maximize storage and versatility, with features like spinner bait storage incorporated into the models.
Features:
4 Latches - Securely keeps the lid closed, even when the tackle box is being thrown around in the roughest conditions.
Clear Cover - Allows you to see your gear without opening the lid, making it easy to find what you need.
Customizable - Can be configured to meet your specific needs, such as adding dividers or compartments.
Waterproof Sealing - Prevent water from getting to prized tackle, keeping the gear dry.
Specifications:
Size: Medium tackle case with deep depth
|
11.28 |
|
|
D-Box Feeder Case - 3700 Large - Shallow
Daiwa’s range of tackle trays, D-Box, has been designed and developed to produce a cohesive range of purpose-built storage perfectly suited to the modern angler.
Available in a range of sizes and depths, Daiwa’s D-BOX range is made from recycled polypropylene, a low-impact material that delivers no toxic waste, no emissions, no fluorocarbons, and no halogens in its process.
All Daiwa D-Box models feature a 4-sided clasp system to ensure secure latching and to fully compress the water-resistant gasket seal, which is installed 360 degrees around the lids of all D-Box models.
Each box was carefully designed to maximize storage and versatility, with features like spinner bait storage incorporated into the models.
Features:
4 Latches - Securely keeps the lid closed, even when the tackle box is being thrown around in the roughest conditions.
Clear Cover - Allows you to see your gear without opening the lid, making it easy to find what you need.
Customizable - Can be configured to meet your specific needs, such as adding dividers or compartments.
Waterproof Sealing - Prevent water from getting to prized tackle, keeping the gear dry.
Specifications:
Size: Large tackle case with shallow depth
|
11.28 |
|