Bellows S/T Pump Kit Dometic Bellows assembly for the S-Vacuum pump, VG4-Vacuum pump and the T-Discharge pump.   *This does not include the O-rings (P/N 385310151) Features: Toilet flush ball kit Color -  White *Sold as an Individual WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

O-Ring S/T Pump Kit This set of 2 "O" rings will fit both S and T pumps that have 8 screws connecting the top and bottom together. *Sold as a Pair WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Myers Pumps QP10KIT Pump End Assembly Quick Prime Pump End Only, Cast Iron, Field Assembly Kit for 1HP Motor, 1-1/2"NPT Ports, 51.3GPM at 10' Head, 108' Head Max, Composite Impeller   Lead Time:  Average 7-10 Days, Factory Back Order.

Myers Pumps QP15KIT Pump End Assembly Quick Prime Pump End Only, Cast Iron, Field Assembly Kit for 1-1/2HP Motor, 1-1/2"NPT Ports, 71.7GPM at 10' Head, 111' Head Max, Composite Impeller   Lead Time:  Average 7-10 Days, Factory Back Order.

Myers Pumps QP10BKIT Pump End Assembly Quick Prime Pump End Only, Cast Iron, Field Assembly Kit for 1HP Motor, 1-1/2"NPT Ports, 51.3GPM at 10' Head, 108' Head Max, Brass Impeller   Lead Time:  Average 7-10 Days, Factory Back Order.  

Myers Pumps QP15BKIT Pump End Assembly Quick Prime Pump End Only, Cast Iron, Field Assembly Kit for 1-1/2HP Motor, 1-1/2"NPT Ports, 71.7GPM at 10' Head, 111' Head Max, Brass Impeller   Lead Time:  Average 7-10 Days, Factory Back Order.

Sealand 385311226 Bellows Clamp S/T Pump  

Yamada NDP-20BAN-D Drum Pump Yamada Pumps NDP-20BAN Type, Model 851515 NDP-20 Series, Air Operated Double Diaphragm Pump, Buna N Diaphragm, Buna N Flat Check Valve / O-Rings, Aluminum (ADC-12) Material, 31.7 GPM Max Flow, 3/4" NPT Fluid Port, 3/8" Female NPT (includes ball valve) Air Inlet, 3/4" Female NPT (includes silencer) Air Exhaust, Aluminum Air Motor, 18 Feet Max Suction Lift

FINISH THOMPSON DB10V-T PUMP END, PVDF/TEFLON 56C   Applications Water and wastewater Electronics Pharmaceuticals Wet scrubber Pulp and paper   Suction Port Size:  1.5 in  Discharge Port Size:  1.5 in  Connection Types:  NPT, BSP, Flange, or Union  Maximum Specific Gravity:  up to 1.8  Maximum Working Pressure:  80 psi (5.5 bar)      @3450 RPM  @2900 RPM  Flow Range*:  0.5 to 96 gpm  0.114 to 20.7 m3/h  Maximum Head:  51 ft  14.2 m  Power Range**:  0.17 to 0.96 hp  0.15 to 0.70 kW *See Performance tab for individual impeller diameter capability **Smallest to largest impeller on 1.0 s.g.    Type:  Sealless Mag Drive  Configuration:  Horizontal  Construction Materials:  Polypropylene or PVDF  O-ring Materials:  FKM, EPDM, Simriz®, or Kalrez®  Bushing Materials:  Carbon, PTFE, Ceramic, or SiC  Shaft Materials:  Ceramic, Hastelloy® C, or SiC      Polypropylene  PVDF  Maximum Temperature:  180º F (82º C)  220º F (104º C) Kalrez® is a registered trademark of DuPont Performance Elastomers Simriz® Perfluoroelastomer is a registered trademark of the Simrit® division of Freudenberg-NOK  Hastelloy® C is a registered trademark of Haynes International, Inc.

FINISH THOMPSON DB6V-T PUMP END PVDF/TEFLON 56C

FINISH THOMPSON DB7V-T PUMP END, PVDF/TEFLON 56C Pulp & Paper Chemical Processing Heat Exchanger Circuit Board Printing     Magnetic Drive Pump, 3/4 HP,   Voltage 208-230/460,   Full Load Amps 2.4-2.3/1.15, 1-1/2 In.   FNPT Inlet, 1-1/2 In.   MNPT Outlet,   Motor Type Induction, Motor Enclosure TEFC,   69 GPM of Water @ 3 Ft. of Head,   69 GPM of Water @ 6 Ft. of Head,   69 GPM of Water @ 9 Ft. of Head,   64 GPM of Water @ 15 Ft. of Head,   58 GPM of Water @ 18 Ft. of Head,   50 GPM of Water @ 24 Ft. of Head,    Length 17-19/64 In., Width 7-1/2 In.  

FINISH THOMPSON DB8V-T PUMP END, PVDF/TEFLON 56C

FINISH THOMPSON DB9V-T PUMP END, PVDF/TEFLON 56C

Ampco Pumps AC216MD14T-S Peo 2 X 1 1/2 Kit Ampco's AC Series pumps have standard stainless steel adapters and type D,DG & E seals available. The Ampco AC Series pumps are in conformance with 3A Sanitary Standards for centrifugal and positive rotary pumps for milk and milk products. # 02-10 This Ampco AC Series pumps also have a standard 32RA (150 grit) finish on all product surfaces.

Vacuflush S & T Pump Bushing Kit 385310242