Amplifier Kit - 4 Gauge  Have everything you need to easily hook up your amplifier with this installation kit by DS18.  Kits are made with true gauge wire, heavy-duty hardware, fusing, and signal cables for long-lasting installations.  There’s a tool for every job and setting up your amplifier is no different.  The only difference is, that we put together everything you need in one convenient package so you can spend less time finding the right tools and more time enjoying your audio system. In the Box: Mini-ANL Fuse Holder with Mini-ANL 100A fuse Rubber Grommet 6'. 4 GA Loom Tube 3' Black Ground Cable - 21mm² OD: 10mm 17' Red Power Cable - 21mm² OD: 10mm 17' Red/Black Twisted RCA Cable 17' Turn-On Remote Cable 20 x 0.15mm 17'. Red/Black Speaker Cable 1.31mm² x 2C OD 3.2 x 6.4mm Cable Ties x 10 Ring Terminals x 2 Spade Terminals x 2 Small Spade Terminals x 5 Rubber Grommet x 1 *Sold as an Individual

Amplifier Kit - 0 Gauge Have everything you need to easily hook up your amplifier with this installation kit by DS18.  Kits are made with true gauge wire, heavy-duty hardware, fusing, and signal cables for long-lasting installations.  There’s a tool for every job and setting up your amplifier is no different.  The only difference is, that we put together everything you need in one convenient package so you can spend less time finding the right tools and more time enjoying your audio system. In the Box: ANL Fuse Holder with ANL 250A fuse Rubber Grommet 6' 0 GA Loom Tube 3' Black Ground Cable - 53mm² OD: 15.8mm 17' Red Power Cable - 53mm² OD: 15.8mm 17' Red/Black Twisted RCA Cable 17' Turn-On Remote Cable  17' Red/Black Speaker Cable - 3.31mm² x 2C OD 4.5 x 9.0mm Cable Ties x 10 Ring Terminals x 2 Spade Terminals x 2 Small Spade Terminals x 5 Rubber Grommet x 1 *Sold as an Individual

Amplifier Kit -  8 Gauge  Have everything you need to easily hook up your amplifier with this installation kit by DS18.  Kits are made with true gauge wire, heavy-duty hardware, fusing, and signal cables for long-lasting installations.  There’s a tool for every job and setting up your amplifier is no different.  The only difference is, that we put together everything you need in one convenient package so you can spend less time finding the right tools and more time enjoying your audio system. In the Box: ANL Fuse Holder with ANL 60A fuse Rubber Grommet 6' 8 GA Loom Tube 3' Black Ground Cable - 8.3 mm² OD: 6.7 mm 17' Red Power Cable - 8.3 mm² OD: 6.7 mm 17' Red/Black Twisted RCA Cable 17' Turn-On Remote Cable  17' Red/Black Speaker Cable - .81 mm² x 2C OD 2.4 x 4.8 mm Cable Ties x 10 Ring Terminals x 2 Spade Terminals x 2 Small Spade Terminals x 5 Rubber Grommet x 1 *Sold as an Individual 

V10-D108K 8 Gauge Add-A-Amp Kit for 4 Gauge Wire If you've already installed a 4 AWG amplifier wiring kit in your boat, the T-Spec V10-D108K 8 AWG wiring kit will let you add another amplifier to your system.  This water-resistant kit includes everything you need to send power to your new marine amplifier. With 8 AWG wire, you'll get long life and maximum power transfer. This kit includes two brass distribution blocks, 10' power and ground wires, a 20' remote turn-on wire, installation hardware, and wire ties for installation.  Does not include RCA cables or speaker wire. Features: Complete marine amplifier wiring kit Includes power wire, ground wire, turn-on wire, circuit breaker, ring terminals, wire ties, and more Marine-compliant cable In the Box: 8 AWG pearl White OFC copper wire - 10' 8 AWG matte Grey OFC copper wire - 10' 18 AWG Blue wire - 10' 2 Distribution blocks w/snap-on covers (One 4 AWG input to 8 AWG ouptut) Ten (10) 6in Wire ties Four (4) 8 AWG crimp-on spade terminals (non-insulated) One (1) 18 AWG crimp-on spade terminal (insulated) One (1) 18 AWG crimp-connector Four (4) 12 mm Phillips-head screws Two (2) Insulating boots for 8 AWG spade terminals Instruction sheet *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

V10-D104K 4 Gauge Add-A-Amp Kit for 1/0 Gauge Wire If you've already installed a 1/0 AWG amplifier wiring kit in your boat, the T-Spec V10-D108K 4 AWG wiring kit will let you add another amplifier to your system.  This water-resistant kit includes everything you need to send power to your new marine amplifier. With 4 AWG wire, you'll get long life and maximum power transfer. This kit includes two brass distribution blocks, 10' power and ground wires, a 20' remote turn-on wire, installation hardware and wire ties for installation.  Does not include RCA cables or speaker wire. Features: Complete marine amplifier wiring kit Includes power wire, ground wire, turn-on wire, circuit breaker, ring terminals, wire ties, and more Marine-compliant cable In the Box: 4 AWG pearl White OFC copper wire - 10' 4 AWG matte Grey OFC copper wire - 10' 18 AWG Blue wire - 10' 2 Distribution blocks w/snap-on covers (One 1/0 AWG input to 4 AWG ouptut) Ten (10) 6" Wire ties Two (2) 4 AWG crimp-on spade terminals (non-insulated) One (1) 18 AWG crimp-on spade terminal (insulated) One (1) 18 AWG crimp-connector Four (4) 12 mm Phillips-head screws Two (2) Insulating boots for 4 AWG spade terminals Instruction sheet *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

V10-2041 4 Gauge Amp Wiring Kit - 20' (6.1 M) A marine amplifier has to stand up to the rigors of life on the water, and so does the wiring kit you use with it.  The T-Spec V10-2041 Amp Kit is ideal for most single marine amps with a power rating of up to 1000 watts and will give you reliable power for seasons to come. Features: Complete marine amplifier wiring kit Includes power wire, ground wire, turn-on wire, circuit breaker, ring terminals, wire ties, and more Marine-compliant cable In the Box: 4 AWG pearl White OFC copper wire - 20' 4 AWG matte Grey OFC copper wire - 20' 18 AWG Blue wire - 20' (1) 100 amp circuit breaker (1) 1/0 AWG ring terminal with White boot (1) 1/0 AWG ring terminal with Silver boot (10) 6" Wire ties *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

V10-1041 4 Gauge Amp Wiring Kit - 10' (3.05 M) A marine amplifier has to stand up to the rigors of life on the water, and so does the wiring kit you use with it.  The T-Spec V10-1041 Amp Kit is ideal for most single marine amps with a power rating of up to 1000 watts and will give you reliable power for seasons to come. Features: Complete marine amplifier wiring kit Includes power wire, ground wire, turn-on wire, circuit breaker, ring terminals, wire ties, and more Marine-compliant cable In the Box: 4 AWG pearl White OFC copper wire - 10' 4 AWG matte Grey OFC copper wire - 10' 18 AWG Blue wire - 20' (1) 100 amp circuit breaker (1) 1/0 AWG ring terminal with White boot (1) 1/0 AWG ring terminal with Silver boot (10) 6" Wire ties *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4" Gauge Power Socket Adapter Mounting Plate This instrument hole adapter allows you to replace an unused 4 in. gauge with two new 1-1/8 in. style gauges. It is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind.  Features: Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look Constructed of UV-resistant injection-molded nylon Specifications: Color: Black Face Plate Outer diameter: 3-3/4 in. Face Plate Inner Diameter: 1-3/16 in. Face Plate Thickness: 3/16 in. Height: 3-3/8 in. Washer Inner Diameter: 1-1/16 in. Washer Thickness: 1/8 in. Weight: 0.06

4" Gauge Power Socket Adapter Mounting Plate - White This instrument hole adapter allows you to replace an unused 4 in. gauge with two new 1-1/8 in. style gauges. It is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind.  Features: Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look Constructed of UV-resistant injection-molded nylon Specifications: Color: White Face Plate Outer diameter: 3-3/4 in. Face Plate Inner Diameter: 1-3/16 in. Face Plate Thickness: 3/16 in. Height: 3-3/8 in. Washer Inner Diameter: 1-1/16 in. Washer Thickness: 1/8 in. Weight: 0.06

Spun Silver Box Set of 4 Gauges for Outboard Engines - Speedometer, Tach, Voltmeter & Fuel Level Packaged and ready for the display counter. This 4 gauge boxed set offers a complete set of gauges ready to install.  Boxed Set Includes: Speedometer (0 to 55 MPH) Tachometer (0 to 6000 RPM) Fuel Level (E to F) Voltmeter (10 to 16 AMPS) Factory P/N KTF0182 *Sold as a Box Set **Gauge Covers not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Newport SS Outboard 4 Gauge Box Set The Newport Stainless Steel (SS) family of marine gauges is a classic style of gauge, engineered to be the new Modern Retro.   Designed with the latest fog resistant features, this Retro Style gauge far surpasses all expectations.  Perimeter lighting makes reading these gauges easy to read Day/Night.  Features: Perimeter lighted Retro White Dial Black and Gray Graphics  Domed fog resistant lens  Two-piece Black pointers  Hand-polished Stainless Steel bezel Studded connection for ring terminals Red illuminated edge-lighting In the box: One (1) Speedometer - 60 MPH (Pitot)   (P/N 45010)  One (1) Tachometer - 7000 RPM   (P/N 45003) One (1) Fuel Gauge - E - 1/2 - F   (P/N 25000) One (1) Voltmeter - 10 to 16 V   (P/N 25009) Installation Manuals *Sold as a Box Set This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

4" Gauge Weather Cover - White Protect your gauges from fading, scratches and the sun when not in use.  This protective cover fits snugly over the gauge to ensure your gauge looks as good as when you got it. Compatible with all Faria 4" Gauges. Available in 2", 4" or 5" size and in Black or White. *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

4" Gauge Weather Cover - Black Protect your gauges from fading, scratches and the sun when not in use.  This protective cover fits snugly over the gauge to ensure your gauge looks as good as when you got it. Compatible with all Faria 4" Gauges. Available in 2", 4" or 5" size and in Black or White. *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

4" Gauge Weather Cover - Black *3-Pack Protect your gauges from fading, scratches, and the sun when not in use.  This protective cover fits snugly over the gauge to ensure your gauge looks as good as when you got it. Compatible with all Faria 4" Gauges. Available in 2", 4" or 5" size and in Black or White. *Sold as a Three (3) Pack This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

4" Gauge Blank Cover a 4" gauge hole with Faria's Gauge Blank Specifications: Fits standard hole for Faria's 4" gauges Black in color ∗ Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.