SUP & Board Rack Edson's SUP & Board Rack is designed to safely, securely, and conveniently cradle your board out of the way of sails, sheets, anchors, feet, and anything else on deck. Built with Edson's famous commitment to lifetime products, high-quality 316 stainless is used throughout and complements any boat's aesthetics. The ComfortGrip padding grips and pads the board, keeping your board's deck pad and finish in top condition while securely holding the board in place. Mounts to any railing from 1" to 1-1/4" diameter. The unique mounting system allows installation on rails of varying vertical/horizontal orientations, folds flat out of the way when not in use, and is easily removed and stowed for security.

Jon Boat Support Bunk & Bracket Assembly 24" carpeted bunk mounts crossways on the trailer tongue to support the flat bottom of a Jon boat. Adjustable from 5-1/2" up to 8" above tongue. Includes all mounting hardware for a 2" or 3" wide tongue. Board is covered with high quality, marine grade carpet. Sold individually. WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SUPRAX SUP Storage Rack System - Single Board Stand Up Paddle Board Storage System You've invested a lot of money into your beautiful boat. Why would you secure your SUP with ugly bungee cords? And that big board sure does take up valuable deck space. You need a storage system that is as stylish as the rest of your vessel. Features: Secure your board to your boat or your wall 061 Aluminum Alloy, sandblasted anodized Heat press, diecut, EVA protective foam Heavy duty shock cords keep boards in place Fits 7/8" and 1" rails Unique rotating clamp allows for mounting on angled stanchions Single Board System Pack Includes: Two Mounting Racks - Sandblasted anodized 6061 aluminum with diecut EVA protective foam Four Articulating Clamps - Versatile clamp can be mounted to straight or angled rails and stanchions Clamp Inserts - 4 x 1" and 4 x .0875" plastic clamp inserts All mounting hardware and installation tools included WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SUP/Kayak Rack Features: 32" wide support arms fits 2 kayaks, canoes, sup, surfboards, etc. Adjustable locking straps, with locking hook at one end Supports many times the weight of an average kayak 2' spacing lower rack Top rack open to accomodate any height Robust powder coated metal square tubing combined with thick metal fabrications and MIG welded for strength Universal mount is easy to assemble and take down Removable bolt detaches assembly for quick storage Powder coated popular grey Hammertone

Swivel Bungee Board Rack - Silver Set of two bungee board racks – includes port and starboard swivels and racks.  Quickly swivels inward for easy access to boards, as well as storage.  Holds up to 2 boards per side (total of 4 boards).  Holds boards up to 2-5/8″ thick.  Machined from aerospace-grade billet aluminum.  Electropolished and anodized for a premium finish that will last for years of maintenance-free use.  Pair with any of PTM Edge's board rack mounts for easy mounting on your tower. Mounting hardware not included. *Sold as a Pair

Swivel Bungee Board Rack - Black Set of two bungee board racks – includes port and starboard swivels and racks.  Quickly swivels inward for easy access to boards, as well as storage.  Holds up to 2 boards per side (total of 4 boards).  Holds boards up to 2-5/8″ thick.  Machined from aerospace-grade billet aluminum.  Electropolished and anodized for a premium finish that will last for years of maintenance-free use.  Pair with any of PTM Edge's board rack mounts for easy mounting on your tower. Mounting hardware not included. *Sold as a Pair

Swivel Bungee Board Rack - Titanium Grey Set of two bungee board racks – includes port and starboard swivels and racks.  Quickly swivels inward for easy access to boards, as well as storage.  Holds up to 2 boards per side (total of 4 boards).  Holds boards up to 2-5/8″ thick.  Machined from aerospace-grade billet aluminum.  Electropolished and anodized for a premium finish that will last for years of maintenance-free use.  Pair with any of PTM Edge's board rack mounts for easy mounting on your tower. Mounting hardware not included. *Sold as a Pair

Triton II Strapless Board Rack The next evolution of the world’s most innovative board rack has arrived with the Roswell Triton II. Featuring Roswell’s R-FLEX suspension technology, features at every angle deliver the most advanced board storage solution on the water. The R-Flex Talon catch head conforms to any board edge shape with an autonomous grip to perfectly engage varying surface angles and contours in a way that naturally reacts as pressure is applied for a secure hold. Features: Roswell R-FLEX Suspension Technology features two layers of molded board protection The R-Flex Talon catch-head design conforms to the board edge with an autonomous grip that naturally reacts to any shape as pressure is applied for a secure hold XL handles that deliver improved ergonomics and rope management Mounting points deliver vertical and horizontal configuration options Integrated stash housing with an included custom rack cover (sold separately) Adjustable telescopic arms allow you to securely hold a small child’s wakeboard and a large wake surfboard securely in the same rack Fits wake surfers and wakeboards up to 23” wide and 2.5” thick Compatible with all Roswell aftermarket towers and swivels Board orientation provides improved ergonomics for inserting and removing boards All stainless steel hardware Specifications: Max Board Thickness: 2.5 inches (6.35 cm) Min. Board Width: 14.0 inches (35.56 cm) Max Board Width: 23.0 inches (58.42 cm) Materials: 6061 Aluminum/Hard Duro TPE Mounting Hardware: 316 Stainless Steel

Elite II Board Rack The Roswell Elite II Board Rack represents elegance wrapped in innovation that takes Roswell's time-tested storage solution to another dimension. Integrating advanced features and functionality with R-Flex suspension technology and an adjustable locking handle, the Elite II delivers a proven platform with a perfect fit for every board. Features: The strap channel provides an extra secure hold for boards of varying widths Tension lock handle provides on-the-fly strap tension adjustment for a secure hold All stainless steel hardware Overmolded cast aluminum tines Roswell r-flex suspension technology features two layers of molded board protection Fits wake surfboards and wakeboards up to 28.5 in. Wide and 2.3 in. Thick Saltwater friendly Specifications: Minimum Board Width: 10 inches (25.54 cm) Max Board Width: 28.5 inches (72.4 cm) Mounting Hardware: 316 Stainless Steel Materials: 6061 aluminum, hard duro

Board Rack Mounts - 4 Bolt - Silver These board rack mounts are machined from aerospace-grade billet aluminum and are anodized and electropolished to give you years of maintenance-free use.  Designed specifically to mount the PTM Watersports Board Racks and Clamping Board Racks to a 1.2″-square 4-bolt pattern. Four (4) mounting screws included. Board rack not included. *Sold as a Pair

Board Rack Mounts - 4 Bolt -Black These board rack mounts are machined from aerospace-grade billet aluminum and are anodized and electropolished to give you years of maintenance-free use.  Designed specifically to mount the PTM Watersports Board Racks and Clamping Board Racks to a 1.2″-square 4-bolt pattern. Four (4) mounting screws included. Board rack not included. *Sold as a Pair

Board Rack Mounts - 4 Bolt - Titanium Grey These board rack mounts are machined from aerospace-grade billet aluminum and are anodized and electropolished to give you years of maintenance-free use.  Designed specifically to mount the PTM Watersports Board Racks and Clamping Board Racks to a 1.2″-square 4-bolt pattern. Four (4) mounting screws included. Board rack not included. *Sold as a Pair

Board Rack Mounts - 2.38" Pipe Clamp - Silver Board Rack Mounts will fit your 2.38" tube tower.  Machined from aerospace-grade billet aluminum. Electropolished and anodized for years of maintenance-free use.  These will pair perfectly with all PTM Edge Board Racks. Mounting hardware included. Board rack not included. *Sold as a Pair

Board Rack Mounts - 2.38" Pipe Clamp - Black Board Rack Mounts will fit your 2.38" tube tower.  Machined from aerospace-grade billet aluminum. Electropolished and anodized for years of maintenance-free use.  These will pair perfectly with all PTM Edge Board Racks. Mounting hardware included. Board rack not included. *Sold as a Pair

Board Rack Mounts - 2.38" Pipe Clamp - Tiatanium Grey Board Rack Mounts will fit your 2.38" tube tower.  Machined from aerospace-grade billet aluminum. Electropolished and anodized for years of maintenance-free use.  These will pair perfectly with all PTM Edge Board Racks. Mounting hardware included. Board rack not included. *Sold as a Pair