|
The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.
Features:
All-new sleek, modern design
First all modular system - extremely versatile
Simple selection and installation
Easy to add accessories
Powder coated aluminum
Requires Vision Mounting Plate to install radar or sat dome antenna
6" Vertical Mount
Compatible with Vertical Radars, Satellite Domes, Dome Lights, and Night/Thermal Vision Cameras
6" Tall
Round
Vertical
|
262.80 |
|
|
Wedge kit for 0-4 degree angle adjustment - 7" diameter
While underway, the bow of your powerboat tends to ride at an elevated angle, causing your radar to be angled. With Edson's 67550 0-4 degree Wedge for Round Base Vision Mounts the elevated bow will be offset aligning your radar to see better. Edson's 0-4 Degree Wedge requires an Edson Mounting Plate and an Edson Vision Series Mount.
Specifications:
Base Mount and Mounting Plate sold separately
**NOTE: ONLY COMPATIBLE with Vertical Round Base Vision Series Mounts (68930, 68900, 68770, 68910, 68730, 68740)**
|
104.40 |
|
|
Wing w/Light Arm Receiver
Edson's 68800 Wing Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Vertical Mounts while providing two wings to mount adding space for GPS Antennas and other electronics. Edson's Wing Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.
Specifications:
Base Mount and Mounting Plate sold separately
For Vertical Mounts
37" Wide
|
372.07 |
|
|
Light Arm Receiver f/Vertical Mounts
Edson's 68790 Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Vertical Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.
Base Mount and Mounting Plate sold separately.
|
51.30 |
|
|
The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.
Features:
All-new sleek, modern design
First all modular system - extremely versatile
Simple selection and installation
Easy to add accessories
Powder coated aluminum
Requires Vision Mounting Plate to install radar or sat dome antenna
12" Vertical Mount
Compatible with Vertical Radars, Satellite Domes, Dome Lights, and Night/Thermal Vision Cameras
12" Tall
Vertical
Round
|
315.90 |
|
|
Light Arm for Radar Domes and Sat Domes
Edson's 68650 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Radar Dome and Satellite Dome.
Light Arm extends 14" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights.
Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical).
Specifications:
Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately)
Base mounts sold separately
|
194.40 |
|
|
Light Arm for Open Array Radars
Edson's 68660 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Open Array Radar.
Light Arm extends 28" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights.
Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical).
Specifications:
Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately)
Base mounts sold separately
|
209.70 |
|
|
The Mast Mount is designed to fit multiple specific manufacturers Radomes and Satellite Antennas. It is constructed from lightweight aluminum and is powder-coasted white for a durable finish. For fast and accurate installation Edson designed mounting feet that can be properly secure to a wide range of mast profiles. One Mounting Plate is required to complete the Edson Vision SeriesMast Mount System.
Features:
Rugged Design
Marine-grade aluminum construction
Powder-coated white
Rivets included for mast attachment
Easy installation
First all modular system - extremely versatile
Simple selection and installation
Requires Vision Mounting Plate to install radar or sat dome antenna
Mast Mount Radar Platform
For sailboats and trawlers
Swivel Feet fit most masts
Rivets included
|
484.20 |
|
|
Vision Series Mounting Plate for Simrad HALO™ Open Array
Edson's Vision Series Mounting Plate allows the Simrad HALO™ to be mounted on a hard top or any of Edson's heavy-duty mounts. If you wish to use one of the Edson Vision Series Mounts, available in single, double, and triple mount configurations, the HALO™-specific mounting plate fits right into Edson's existing family.
The Vision Series Mounting Plate is made from marine-grade aluminum and finished with a white powder coat. This American-crafted mount is built to handle all of your adventures on the water, with style.
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mount sold separately.
|
89.99 |
|
|
Light Arm Receiver for Aft Angled Mounts
The Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Aft Angle Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
51.30 |
|
|
Vision Series Universal Mounting Plate - 15" Diameter with No Holes
With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's Vision Series Universal Mounting Plate is 15" diameter without pre-drilled holes. You drill your own holes to fit any antenna or dome.
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
130.36 |
|
|
Vision Series Univeral Mounting Plate - 10-5/8" Diameter with No Holes
With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's Vision Series Universal Mounting Plate is 10-5/8" diameter without pre-drilled holes. You drill your own holes to fit any antenna or dome.
Mounting Plates are required to complete an Edson Vision Series Mounting Series.
Order Base Mount separately.
|
130.36 |
|
|
Vision Series Mounting Plate f/Raymarine Quantum, 2kW & 4kW Radar Domes
With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68551 Vision Series Mounting Plate is designed for Raymarine Radar Domes (Quantum, Quantum 2, RD418D, RD424D, RD418HD, RD424HD). Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mount sold separately.
|
142.20 |
|
|
White Poly Fold Down Drop Leaf Table - Edson Vision Series/Console Pedestals
Edson’s White Poly Fold-Down Drop-Leaf Tables turn your cockpit into a comfortable dining area. They fold down and clip against the guard when not in use. By simply swinging the table up and clipping the formed wire brackets into place, the table is ready for use. When the leaves are closed you have a 26” (66 cm) long by 15” (38 cm) wide table with fiddle rails. With the leaves folded out the table area increases to a full 26” x 30” (66 cm x 76 cm).
Edson Poly Tables :
Constructed of solid, UV Stable white marine-grade polyethylene
Non-Magnetic Stainless Hardware
Easily removable for storage
No Legs to get in the way!
All Stainless Fasteners
Will not rot, swell or delaminate when exposed to humidity or moisture
Scuff and scratch resistant
Weight 26.8 lbs
**IMPORTANT: If mounting table to an Edson Vision Series NV pedestal with curved front, you must also order the Console Table Bracket Adapter #960-A-3006**
|
1082.56 |
|
|
White Poly Fold Down Luncheon Table - Edson Vision Series/Console Pedestal
Edson’s Fold-Down Luncheon Tables are designed to offer a very handy table to fit smaller cockpits and are an ideal cockpit cocktail table. Measuring 13-1/2" x 24" (34.3 x 61 cm) and equipped with fiddle rails on both sides and ends, the Luncheon Table is available in both Teak and White Poly. When not in use, the table folds flat against the guards or can be easily removed from its guard mounted strap by pulling out the hinge pin. Comes complete with all mounting hardware.
Edson Poly Tables
Constructed of solid, UV Stable white marine-grade polyethylene
Non-Magnetic Stainless Hardware
Easily removable for storage
No Legs to get in the way!
All Stainless Fasteners
Will not rot, swell or delaminate when exposed to humidity or moisture
Scuff and scratch resistant
Weight 12.3 lbs
**IMPORTANT: If mounting table to an Edson Vision Series NV pedestal with curved front, you must also order the Console Table Bracket Adapter #960-A-3006**
|
656.26 |
|