The Mast Mount is designed to fit multiple specific manufacturers Radomes and Satellite Antennas.  It is constructed from lightweight aluminum and is powder-coasted white for a durable finish.  For fast and accurate installation Edson designed mounting feet that can be properly secure to a wide range of mast profiles. One Mounting Plate is required to complete the Edson Vision SeriesMast Mount System. Features: Rugged Design Marine-grade aluminum construction Powder-coated white Rivets included for mast attachment Easy installation First all modular system - extremely versatile Simple selection and installation Requires Vision Mounting Plate to install radar or sat dome antenna Mast Mount Radar Platform For sailboats and trawlers Swivel Feet fit most masts Rivets included

Wing w/Light Arm Receiver Edson's 68800 Wing Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Vertical Mounts while providing two wings to mount adding space for GPS Antennas and other electronics. Edson's Wing Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.  Specifications: Base Mount and Mounting Plate sold separately For Vertical Mounts 37" Wide

Light Arm Receiver f/Vertical Mounts Edson's 68790 Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Vertical Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.  Base Mount and Mounting Plate sold separately.

Vision Series Universal Mounting Plate - 15" Diameter with No Holes With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's Vision Series Universal Mounting Plate is 15" diameter without pre-drilled holes. You drill your own holes to fit any antenna or dome. Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

GPS Mount with Light Extension Adapter Edson's 67400 GPS Mount with Light Extension Adapter is specifically designed for Edson's Vision Series Light Arms. The  powder coated stainless steel GPS Mount allows you to add a GPS antenna to your Light Arm. The GPS Mount also has an extension to attach your navigation anchor/steaming light.  *Shown with optional Perko Anchor/Steaming Light. Must be ordered separately.* The 67400 GPS Mount with Light Extension Adapter requires an Edson Light Arm that is secured to a Vision Series Base Mount with a Light Arm Receiver and Radar Mounting Plate. Order Edson's Light Arm, Light Arm Receiver,  Base Mount and Mounting Plate separately.

Vision Series Univeral Mounting Plate - 10-5/8" Diameter with No Holes With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's Vision Series Universal Mounting Plate is 10-5/8" diameter without pre-drilled holes. You drill your own holes to fit any antenna or dome. Mounting Plates are required to complete an Edson Vision Series Mounting Series. Order Base Mount separately.

Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow. Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available. All-new sleek, modern design. First all modular system - extremely versatile. Easy to select and install for any radar, dome, light or camera combination. Easy to add accessories. Upgradable for future additions and modifications. Powder coated aluminum construction   Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer. The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."   See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )   Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.   SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686

White Poly Fold Down Luncheon Table - Edson Vision Series/Console Pedestal Edson’s Fold-Down Luncheon Tables are designed to offer a very handy table to fit smaller cockpits and are an ideal cockpit cocktail table. Measuring 13-1/2" x 24" (34.3 x 61 cm) and equipped with fiddle rails on both sides and ends, the Luncheon Table is available in both Teak and White Poly. When not in use, the table folds flat against the guards or can be easily removed from its guard mounted strap by pulling out the hinge pin. Comes complete with all mounting hardware. Edson Poly Tables Constructed of solid, UV Stable white marine-grade polyethylene Non-Magnetic Stainless Hardware Easily removable for storage No Legs to get in the way! All Stainless Fasteners Will not rot, swell or delaminate when exposed to humidity or moisture Scuff and scratch resistant Weight 12.3 lbs **IMPORTANT: If mounting table to an Edson Vision Series NV pedestal with curved front, you must also order the Console Table Bracket Adapter #960-A-3006**

Vision Series Mounting Plate for Simrad HALO™ Open Array Edson's Vision Series Mounting Plate allows the Simrad HALO™ to be mounted on a hard top or any of Edson's heavy-duty mounts. If you wish to use one of the Edson Vision Series Mounts, available in single, double, and triple mount configurations, the HALO™-specific mounting plate fits right into Edson's existing family. The Vision Series Mounting Plate is made from marine-grade aluminum and finished with a white powder coat. This American-crafted mount is built to handle all of your adventures on the water, with style. Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mount sold separately.

Light Arm Receiver for Aft Angled Mounts The Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Aft Angle Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount. Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Vision Series Mounting Plate f/Raymarine Quantum, 2kW & 4kW Radar Domes With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68551 Vision Series Mounting Plate is designed for Raymarine Radar Domes (Quantum, Quantum 2, RD418D, RD424D, RD418HD, RD424HD). Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mount sold separately. 

White Poly Fold Down Drop Leaf Table - Edson Vision Series/Console Pedestals Edson’s White Poly Fold-Down Drop-Leaf Tables turn your cockpit into a comfortable dining area. They fold down and clip against the guard when not in use. By simply swinging the table up and clipping the formed wire brackets into place, the table is ready for use. When the leaves are closed you have a 26” (66 cm) long by 15” (38 cm) wide table with fiddle rails. With the leaves folded out the table area increases to a full 26” x 30” (66 cm x 76 cm). Edson Poly Tables : Constructed of solid, UV Stable white marine-grade polyethylene Non-Magnetic Stainless Hardware Easily removable for storage No Legs to get in the way! All Stainless Fasteners Will not rot, swell or delaminate when exposed to humidity or moisture Scuff and scratch resistant Weight 26.8 lbs **IMPORTANT: If mounting table to an Edson Vision Series NV pedestal with curved front, you must also order the Console Table Bracket Adapter #960-A-3006**

Vision Series Mounting Plate for Raymarine T300 & T400 Thermal Cameras and Flir M-Series- Year 2017 and Newer With Edson's Vision Series Mounting System once you have selected the mount you want to install your electronics to you must select the corresponding plate that has the correct bolt pattern for your electronics. Edson's 68600 Vision Series Mounting Plate is designed for Year 2017 and NEWER Raymarine T300 & T400 fixed Mount Pan/Tilt Thermal Cameras and FLIR M-Series (M-324XP, M-625XP, M-324L, M-625L, M-612L, M-618CS, M-324S, M-324CS, M-625S, M-625CS, M-617CS, M132, M232).  Mounting Plates are required to complete an Edson Vision Series Mounting System. Order Base mount separately.  *7.8-inch Diameter with NO WING MOUNT CAPABILITIES

Wedge kit for 0-4 degree angle adjustment - 7" diameter While underway, the bow of your powerboat tends to ride at an elevated angle, causing your radar to be angled. With Edson's 67550 0-4 degree Wedge for Round Base Vision Mounts the elevated bow will be offset aligning your radar to see better. Edson's 0-4 Degree Wedge requires an Edson Mounting Plate and an Edson Vision Series Mount.  Specifications: Base Mount and Mounting Plate sold separately **NOTE: ONLY COMPATIBLE with Vertical Round Base Vision Series Mounts (68930, 68900, 68770, 68910, 68730, 68740)**

Perko Combination Anchor/Steaming Light (50" Wire Length) Edson offers the 67500 Perko Combination Anchor/Steaming Light (50" Wire Length) that is specifically designed for Edson's Vision Series Light Arms. All-Round White Light with 12 volt bulb and is constructed of Black Polymer and Chrome Plated Zinc Alloy Top.  Certified For Use on Sail or Power Driven Vessels Under 20 Meters (65.6 ft.) in Length The 67500 Perko Combination Anchor/Steaming Light requires an Edson Light Arm that is secured to a Vision Series Base Mount with a Light Arm Receiver and Radar Mounting Plate. Order Edson's Light Arm, Light Arm Receiver,  Base Mount and Mounting Plate separately.