|
FAST 7000 Top-Down Swivel
The Fast 7000 top-down swivel makes an easy furling solution for your asymmetric Spinnaker. Adapt the FX+ 7000 (26mm inner jaw width) Gennaker/Code sail furler with the Fast 7000 top-down swivel so an asymmetric spinnaker can be used.
Features:
Provides easy furling
Top-down furling, i.e. from top to bottom (free luff)
Free rotating tack fitting
No maintenance (the mechanism is highly protected)
Same features as FX+ mechanisms (tested, strong, and quick-release attachments)
Specifications:
Weight: 1.26 kg
|
1866.79 |
|
|
FAST 900 Top-Down Swivel
The Fast 900 top-down swivel makes an easy furling solution for your asymmetric Spinnaker. Adapt the FX+ 900 (12mm inner jaw width) Gennaker/Code sail furler with the Fast 900 top-down swivel so an asymmetric spinnaker can be used.
Features:
Provides easy furling
Top-down furling, i.e. from top to bottom (free luff)
Free rotating tack fitting
No maintenance (the mechanism is highly protected)
Same features as FX+ mechanisms (tested, strong, and quick-release attachments)
Specifications:
Weight: 0.24 kg
|
460.54 |
|
|
FAST 1500 Top-Down Swivel
The Fast 1500 top-down swivel makes an easy furling solution for your asymmetric Spinnaker. Adapt the FX+ 900/1500 (15mm inner jaw width) Gennaker/Code sail furler with the Fast 1500 top-down swivel so an asymmetric spinnaker can be used.
Features:
Provides easy furling
Top-down furling, i.e. from top to bottom (free luff)
Free rotating tack fitting
No maintenance (the mechanism is highly protected)
Same features as FX+ mechanisms (tested, strong, and quick-release attachments)
Specifications:
Weight: 0.24 kg
|
499.19 |
|
|
FAST 2500 Top-Down Swivel
The Fast 2500 top-down swivel makes an easy furling solution for your asymmetric Spinnaker. Adapt the FX+ 2500 (17.5mm inner jaw width) Gennaker/Code sail furler with the Fast 2500 top-down swivel so an asymmetric spinnaker can be used.
Features:
Provides easy furling
Top-down furling, i.e. from top to bottom (free luff)
Free rotating tack fitting
No maintenance (the mechanism is highly protected)
Same features as FX+ mechanisms (tested, strong, and quick-release attachments)
Specifications:
Weight: 0.46 kg
|
602.88 |
|
|
FAST 4500 Top-Down Swivel
The Fast 4500 top-down swivel makes an easy furling solution for your asymmetric Spinnaker. Adapt the FX+ 4500 (19mm inner jaw width) Gennaker/Code sail furler with the Fast 4500 top-down swivel so an asymmetric spinnaker can be used.
Features:
Provides easy furling
Top-down furling, i.e. from top to bottom (free luff)
Free rotating tack fitting
No maintenance (the mechanism is highly protected)
Same features as FX+ mechanisms (tested, strong, and quick-release attachments)
Specifications:
Weight: 0.66 kg
|
811.18 |
|
|
FX+7000 Flying Sail Furler with Ratchet
Further to constructive technical exchanges with ocean racers, Facnor has developed for over 20 years a sophisticated range of Gennaker/Code Zero furlers: the FX+. These furlers are known to be light, easy to fit, and aesthetic. Also, this furler is reliable for cruising or racing.
Features:
Adapted to sailboat from 16 to 20m (55 to 70 ft.)
Code sail surface of 250m² maximum (2690ft²) (max 70m² / 753ft² staysail)
Ratchet option Start & Go included (working both clock or anti-clockwise)
Unique captive quick-release pin
Possible conversion for asymmetric Spinnaker
Composite/carbon housing
Maintenance-free units (sealed bearings)
The Standard Kit of the FX+7000 Furler Includes:
A ratchet in s/s duplex enabling a temporary stop when furling in and a self-locking both clockwise and anti-clockwise (Facnor patent)
One continuous line drum in anodized aluminum and CNC machined in a solid block, protected by a composite/carbon housing, low-profile drum
One swivel also in anodized aluminum and CNC machined in a solid block, including a neoprene anti-impact cover with high-visibility marking
One snap shackle as the bottom drum attachment (Optional SSH+7000 solid sheave as an alternative)
One shackle as the top swivel attachment (optional SB7000 2-to-1 block as an alternative)
Offers Comfort in Sail Handling, Reliability, and Easy Manipulation:
Monoblock's conception of the mechanisms for more sturdiness and long-lasting
Intuitive manipulation to connect the sail to the mechanisms thanks to a fitted-in, compact, and unique captive quick-release pin
Bottom drive unit with a largely dimensioned diameter for strong torque and therefore more comfortable handling
Is rotation transmitted through an anti-torsion luff rope? optional—sliding inside the luff tape and fitted with a thimble on each end (FCI7000 s-s thimbles and FRC s-s clamps are also available)
Easy installation of the furling loop (s-s guide + drum notch), discover Facnor Special GRIP loops for an efficient rotation of the drum, and the removable fairleads TSL25/28
Specifications:
Weight: 23.44 kg
Sailboat Length (feet): 55'-70'
Code Sail Area (m²): 250,00
Code Sail Area (ft²): 2690,00
Staysail Area (m²): 70,00
Staysail Area (ft²): 753,00
Safe Working Load (tons): 7,00
Standard Top Swivel Attachment: Shackle
Standard Bottom Drum Attachment: Snapshackle
Ratchet Option: Included
Continuous Line Drum Ø: 199,00mm
Spliced Furling Line Ø: 10,00mm
Warranty: 3 years
*Optimize the investment by converting the furler for use with an asymmetric spinnaker; just add the FAST 7000 top-down thimble.
|
5890.75 |
|
|
FX+1500 Flying Sail Furler with Ratchet
Further to constructive technical exchanges with ocean racers, Facnor has developed for over 20 years a sophisticated range of Gennaker/Code Zero furlers: the FX+. These furlers are known to be light, easy to fit, and aesthetic. Also, this furler is reliable for cruising or racing.
Features:
Adapted to sailboat from 10 to 12m (30 to 40 ft.)
Code sail surface of 60m²/ 646ft² maximum (max 20m² / 215ft² staysail)
Ratchet option Start & Go included (working both clock or anti-clockwise)
Unique captive quick-release pin
Possible conversion for asymmetric Spinnaker
Composite/carbon housing
Maintenance-free units (sealed bearings)
The Standard Kit of the FX+1500 Furler Includes:
A ratchet in s/s duplex enabling a temporary stop when furling in and a self-locking both clockwise and anti-clockwise (Facnor patent)
One continuous line drum in anodized aluminum and CNC machined in a solid block, protected by a composite/carbon housing, low-profile drum
One swivel also in anodized aluminum and CNC machined in a solid block, including a neoprene anti-impact cover with high-visibility marking
One snap shackle as the bottom drum attachment (Optional SSH+900/1500 solid sheave as an alternative)
One shackle as the top swivel attachment (optional FRX900/1500 2-to-1 friction ring as an alternative)
Offers Comfort in Sail Handling, Reliability, and Easy Manipulation:
Monoblock's conception of the mechanisms for more sturdiness and long-lasting
Intuitive manipulation to connect the sail to the mechanisms thanks to a fitted-in, compact, and unique captive quick-release pin
Bottom drive unit with a largely dimensioned diameter for strong torque and therefore more comfortable handling
Is rotation transmitted through an anti-torsion luff rope? optional—sliding inside the luff tape and fitted with a thimble on each end (FCI1500 s-s thimbles and FRC s-s clamps are also available)
Optimize the investment by converting the furlers for use with the asymmetric spinnaker; just add a FAST top-down thimble
Specifications:
Weight: 0.98 kg
Sailboat Length (feet): 30'-40'
Code Sail Area (m²): 60,00
Code Sail Area (ft²): 646,00
Staysail Area (m²): 20,00
Staysail Area (ft²): 215,00
Safe Working Load (tons): 1,50
Standard Top Swivel Attachment: Shackle
Standard Bottom Drum Attachment: Snapshackle
Ratchet Option: Included
Continuous Line Drum Ø: 109,00mm
Spliced Furling Line Ø: 8,00mm
Warranty: 3 years
*Optimize the investment by converting the furler for use with an asymmetric spinnaker; just add the FAST 1500 top-down thimble.
|
1447.60 |
|
|
FX+2500 Flying Sail Furler with Ratchet
Further to constructive technical exchanges with ocean racers, Facnor has developed for over 20 years a sophisticated range of Gennaker/Code Zero furlers: the FX+. These furlers are known to be light, easy to fit, and aesthetic. Also, this furler is reliable for cruising or racing.
Features:
Adapted to sailboat from 12 to 14m (40 to 45 ft.)
Code sail surface of 100m²/ 1076ft² maximum (max 30m² / 322ft² staysail)
Ratchet option Start & Go included (working both clock or anti-clockwise)
Unique captive quick-release pin
Possible conversion for asymmetric Spinnaker
Composite/carbon housing
Maintenance-free units (sealed bearings)
The Standard Kit of the FX+2500 Furler Includes:
A ratchet in s/s duplex enabling a temporary stop when furling in and a self-locking both clockwise and anti-clockwise (Facnor patent)
One continuous line drum in anodized aluminum and CNC machined in a solid block, protected by a composite/carbon housing, low-profile drum
One swivel also in anodized aluminum and CNC machined in a solid block, including a neoprene anti-impact cover with high-visibility marking
One snap shackle as the bottom drum attachment (optional SSH+2500 solid sheave as an alternative)
One shackle as the top swivel attachment (optional SB2500 2-to-1 block as an alternative)
Offers Comfort in Sail Handling, Reliability, and Easy Manipulation:
Monoblock's conception of the mechanisms for more sturdiness and long-lasting
Intuitive manipulation to connect the sail to the mechanisms thanks to a fitted-in, compact, and unique captive quick-release pin
Bottom drive unit with a largely dimensioned diameter for strong torque and therefore more comfortable handling
Is rotation transmitted through an anti-torsion luff rope? Optional—sliding inside the luff tape and fitted with a thimble on each end (FCI2500 s-s thimbles and FRC s-s clamps are also available)
Easy installation of the furling loop (s-s guide + drum notch), discover Facnor Special GRIP loops for an efficient rotation of the drum, and the removable fairleads TSL25/28
Specifications:
Weight: 1.68 kg
Sailboat Length (feet): 40'-45'
Code Sail Area (m²): 100,00
Code Sail Area (ft²): 1076,00
Staysail Area (m²): 30,00
Staysail Area (ft²): 322,00
Safe Working Load (tons): 2,50
Standard Top Swivel Attachment: Shackle
Standard Bottom Drum Attachment: Snapshackle
Ratchet Option: Included
Continuous Line Drum Ø: 149,00mm
Spliced Furling Line Ø: 8,00mm
Warranty: 3 years
*Optimize the investment by converting the furler for use with an asymmetric spinnaker; just add the FAST 2500 top-down thimble.
|
2118.71 |
|
|
FX+4500 Flying Sail Furler with Ratchet
Further to constructive technical exchanges with ocean racers, Facnor has developed for over 20 years a sophisticated range of Gennaker/Code Zero furlers: the FX+. These furlers are known to be light, easy to fit, and aesthetic. Also, this furler is reliable for cruising or racing.
Features:
Adapted to sailboat from 13 to 16m (42 to 55 ft.)
Code sail surface of 140m² maximum (1500ft²) (max 50m² / 538ft² staysail)
Ratchet option Start & Go included (working both clock or anti-clockwise)
Unique captive quick-release pin
Possible conversion for asymmetric Spinnaker
Composite/carbon housing
Maintenance-free units (sealed bearings)
The Standard Kit of the FX+4500 Furler Includes:
A ratchet in s/s duplex enabling a temporary stop when furling in and a self-locking both clockwise and anti-clockwise (Facnor patent)
One continuous line drum in anodized aluminum and CNC machined in a solid block, protected by a composite/carbon housing, low-profile drum
One swivel also in anodized aluminum and CNC machined in a solid block, including a neoprene anti-impact cover with high-visibility marking
One snap shackle as the bottom drum attachment (optional SSH+4500 solid sheave as an alternative)
One shackle as the top swivel attachment (optional SB4500 2-to-1 block as an alternative)
Offers Comfort in Sail Handling, Reliability, and Easy Manipulation:
Monoblock's conception of the mechanisms for more sturdiness and long-lasting
Intuitive manipulation to connect the sail to the mechanisms thanks to a fitted-in, compact, and unique captive quick-release pin
Bottom drive unit with a largely dimensioned diameter for strong torque and therefore more comfortable handling
Is rotation transmitted through an anti-torsion luff rope? Optional—sliding inside the luff tape and fitted with a thimble on each end (FCI4500 s-s thimbles and FRC s-s clamps are also available)
Easy installation of the furling loop (s-s guide + drum notch), discover Facnor Special GRIP loops for an efficient rotation of the drum, and the removable fairleads TSL25/28
Specifications:
Weight: 2.40 kg
Sailboat Length (feet): 42'-55'
Code Sail Area (m²): 140,00
Code Sail Area (ft²): 1500,00
Staysail Area (m²): 50,00
Staysail Area (ft²): 538,00
Safe Working Load (tons): 4,50
Standard Top Swivel Attachment: Shackle
Standard Bottom Drum Attachment: Snapshackle
Ratchet Option: Included
Continuous Line Drum Ø: 169,00mm
Spliced Furling Line Ø: 10,00mm
Warranty: 3 years
*Optimize the investment by converting the furler for use with an asymmetric spinnaker; just add the FAST 4500 top-down thimble.
|
3417.85 |
|
|
FX+0900 Flying Sail Furler
Further to constructive technical exchanges with ocean racers, Facnor has developed for over 20 years a sophisticated range of Gennaker/Code Zero furlers: the FX+. These furlers are known to be light, easy to fit, and aesthetic. Also, this furler is reliable for cruising or racing.
Features:
Adapted to sailboat from 6 to 10.5m (20 to 30 ft.)
Code sail surface of 30m²/ 322ft² maximum
Captive quick-release pin
Possible conversion for asymmetric Spinnaker
Composite/carbon housing
Maintenance-free units (sealed bearings)
The Standard Kit of the FX+900 Furler Includes:
One continuous line drum in anodized aluminum and CNC machined in a solid block, protected by a composite/carbon housing, low-profile drum
One swivel also in anodized aluminum and CNC machined in a solid block, including a neoprene anti-impact cover with high-visibility marking
One snap shackle as the bottom drum attachment (Optional SSH+900/1500 solid sheave as an alternative)
One shackle as the top swivel attachment (optional FRX900/1500 2-to-1 friction ring as an alternative)
Offers Comfort in Sail Handling, Reliability, and Easy Manipulation:
Monoblock's conception of the mechanisms for more sturdiness and long-lasting
Intuitive manipulation to connect the sail to the mechanisms thanks to a fitted-in, compact, and unique captive quick-release pin
Bottom drive unit with a largely dimensioned diameter for strong torque and therefore more comfortable handling
Is rotation transmitted through an anti-torsion luff rope? Optional—sliding inside the luff tape and fitted with a thimble on each end
Optimize the investment by converting the furlers for use with the asymmetric spinnaker; just add a FAST top-down thimble
Specifications:
Weight: 0.57 kg
Sailboat Length (feet): 20'-30'
Code Sail Area (m²): 30,00
Code Sail Area (ft²): 322,00
Staysail Area (m²): Not adapted to furl a staysail
Staysail Area (ft²): Not adapted to furl a staysail
Safe Working Load (tons): 0,90
Standard Top Swivel Attachment: Shackle
Standard Bottom Drum Attachment: Snapshackle
Ratchet Option: NOT available
Continuous Line Drum Ø: 85,00mm
Spliced Furling Line Ø: 6,00mm
Warranty: 3 years
*Optimize the investment by converting the furler for use with an asymmetric spinnaker; just add the FAST 900 top-down thimble.
|
1048.45 |
|
|
1.5" Thermal Camera Top Down Riser Mounts Vertical or Upside Down for FLIR MD-Series & Raymarine T-200
Ever wanted to hand your FLIR M-Series or Raymarine T-Series upside down? Well now you can with the Seaview Top Down Riser. Made from Kingstarboard a durable weather resistant marine grade polymer.
Unique Design
This unique design allows you to mount your FLIR MD Series or Raymarine T200 upside down.
High Strength
Made from white ABS glass filled plastic. This helps prevent the plastic from cracking in severe conditions. Ribbing is added for increased strength.
|
158.40 |
|
|
SSH+7000 Solid Sheave Block
The SSH+ solid sheave is used to adjust the tack point. To sail closer to the wind even better, it is necessary to lower the sail tack. This will push forward the belly. Inversely, lift up the tack, and the belly of the sail will go aft, and sailors will be able to sail further downwind.
Features:
Quick and safe fitting for a FX+ 7000 furler
Quick release pin
Smooth and quickly installed
Installation as 3-to-1 or 2-to-1
Enables tightening from below the drum
Possible fitting in the case of bowsprit
Specifications:
Weight: 0.41 kg
|
241.91 |
|
|
Furling Top Swivel
The top head swivel is from machine-turned solid aluminum with stainless steel ball-bearing.
Features:
Drum Diameter: 25mm
Sail Area: 100 square foot
Break Load: 1,108kg
Safe Working Load: 554kg
Weight: 55g
|
58.34 |
|
|
Newport SS 4" Tachometer with System Check Indicator for Johnson/Evinrude Gas Outboard - 7000 RPM
The Newport Stainless Steel (SS) family of marine gauges is a classic style of gauge, engineered to be the new Modern Retro.
Designed with the latest fog resistant features, this Retro Style gauge far surpasses all expectations. Perimeter lighting makes reading these gauges easy to read Day/Night.
Features:
Perimeter lighted Retro White Dial
Black and Gray Graphics
Domed fog resistant lens
Two-piece Black pointers
Hand-polished Stainless Steel bezel
Studded connection for ring terminals
Red illuminated edge-lighting
Technical Specifications:
Operating Range - 0 to 7000 RPM and System Check Indicator
3.375" (85 mm) Mounting hole
Operating Voltage - 12/24 V
In the box:
Gauge
Mounting Hardware
Installation Manual
Factory P/N TC9491
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
204.47 |
|
|
PowerPod Pre-Cut for Garmin GPSMAP 1042xsv/1022xsv/1022
PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.
PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.
NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.
Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.
All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.
PowerPods: Protection, Convenience, Security.
|
427.62 |
|