Bronze Thru-Hull Transducer, 1kW (No Plug) 1 kW 50/200 kHz 28/8.5 degree Beam Angles Bronze Thru-Hull 10 Meter Cable, no connector provided MB1100 required for some applications - contact Furuno for more information WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Airmar B117 200/50kHz Bronze Thru-Hull Transducer - 6 Pin 010-10182-01 Connect our bronze, thru-hull mount transducer to your compatible device to receive depth and temperature data. This transducer has an operating frequency of 200 and 50 kHz; a beamwidth of 12 degrees at 200 kHz, 45 degrees at 50 kHz; and a 0 to 8 degree deadrise. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rubber Coated Transducer, 1kW (No Plug) 1 kW 50/200 kHz 28/8.5 degree Beam Angles Rubber Coated - Chest, Housing or Tank Mount 10-Meter Cable, no connector provided MB1100 required for some applications - contact Furuno for more information WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 0° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer. Features: 1 kW power, 50/200 kHz multiple-ceramics Engineered for center-console and trailered boats Low-profile protrusion below the hull No affect on your boats running performance Interfaces to any 600W or 1 kW echosounder Bronze transducer housing Depth and fast-response water-temperature sensor Boat Size: 8M to 11M (25' to 35') Specifications: Weight: 2.7 kg (6 lb) Hull Deadrise: Up to 28° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Elementâ„¢ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer. Features: 1 kW power, 50/200 kHz multiple-ceramics Engineered for center-console and trailered boats Low-profile protrusion below the hull No affect on your boats running performance Interfaces to any 600W or 1 kW echosounder Bronze transducer housing Depth and fast-response water-temperature sensor Boat Size: 8M to 11M (25' to 35') Specifications: Weight: 2.7 kg (6 lb) Hull Deadrise: Up to 28° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer. Features: 1 kW power, 50/200 kHz multiple-ceramics Engineered for center-console and trailered boats Low-profile protrusion below the hull No affect on your boats running performance Interfaces to any 600W or 1 kW echosounder Bronze transducer housing Depth and fast-response water-temperature sensor Boat Size: 8M to 11M (25' to 35') Specifications: Weight: 2.7 kg (6 lb) Hull Deadrise: Up to 28° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B164 Bronze Thru-Hull Transducer w/Humminbird 14-Pin Plug - 0° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer. Features: 1 kW power, 50/200 kHz multiple-ceramics Engineered for center-console and trailered boats Low-profile protrusion below the hull No affect on your boats running performance Interfaces to any 600W or 1 kW echosounder Bronze transducer housing Depth and fast-response water-temperature sensor Boat Size: 8M to 11M (25' to 35') Specifications: Weight: 2.7 kg (6 lb) Hull Deadrise: Up to 28° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B164 Bronze Thru-Hull Transducer w/Humminbird 14-Pin Plug - 12° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer. Features: 1 kW power, 50/200 kHz multiple-ceramics Engineered for center-console and trailered boats Low-profile protrusion below the hull No affect on your boats running performance Interfaces to any 600W or 1 kW echosounder Bronze transducer housing Depth and fast-response water-temperature sensor Boat Size: 8M to 11M (25' to 35') Specifications: Weight: 2.7 kg (6 lb) Hull Deadrise: Up to 28° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B164 Bronze Thru-Hull Transducer w/Humminbird 14-Pin Plug - 20° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer. Features: 1 kW power, 50/200 kHz multiple-ceramics Engineered for center-console and trailered boats Low-profile protrusion below the hull No affect on your boats running performance Interfaces to any 600W or 1 kW echosounder Bronze transducer housing Depth and fast-response water-temperature sensor Boat Size: 8M to 11M (25' to 35') Specifications: Weight: 2.7 kg (6 lb) Hull Deadrise: Up to 28° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

GT12M Bronze Thru-Hull - 350W - 20 Degree Designed for reduced drag and optimum sonar performance on midsize fishing and cruising boats, this flush-mounted, 350-watt mid-band CHIRP transducer clearly defines fish arches, structure, and bottom depth returns on your display. Midband Chirp Traditional Sonar This 8-pin, 350-watt bronze thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 800’ in saltwater and 1,200’ in freshwater. Broad Frequency Range Use the perfect frequency for the waters you’re fishing. Covering the medium frequency range, this transducer pulses from 85–165 kHz, displaying a wide coverage area, crisp fish arches, and accurate depth readings. Optimum Ping Sensitivity Offering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on your compatible chartplotter display. Thru-Hull Installation A durable bronze housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns. Auto-ID Technology Enjoy simple plug-and-play operation with Garmin auto-identification technology — which enables the sonar to automatically configure itself to the transducer being used. Fits Various Hull Types Configurable for a wide variety of boat hull materials, including fiberglass, composite, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–20° without a fairing block. In the Box: GT12M-THF transducer Jam nut Washer Documentation Specifications: Transducer Frequency: Medium band CHIRP (85-165 kHz) Transducer Power: 350 W Transducer Beamwidth: 24° -16° Transducer Maximum Depth: 800 ft saltwater / 1200 ft freshwater Transducer Cable Length: 50 ft Transducer Depth/Speed/Temperature: Depth, temperature Transducer Number of Pins: 8-pin Housing Material: Bronze Transducer Supported Deadrise/Transom Angles: 20° supports hull deadrise angles from 16° to 24°

Bronze Thru Hull Transducer Bronze Thru-Hull Transducers are for large boats and for boats with in-board motors that make typical Transom Mount Transducers ineffective. They are not recommended for trailered boats as the transducer is not flush with the hull. Bronze Thru-Hull Transducers require that a hole be drilled in the hull and the shaping of a fairing block. Professional installation is recommended. Plastic Thru-Hull Transducers are an alternative to Bronze Thru-Hull Transducers. Description: Bronze thru hull transducer, single or dual beam use. 20/60 degree, 200/83kHz. Transducer dimensions: 5.25L X 2.75"W X 1.2"D (below hull); Shaft diameter: .86". Fairing block not included. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GT12M Bronze Thru-Hull - 350W - 0 Degree Designed for reduced drag and optimum sonar performance on midsize fishing and cruising boats, this flush-mounted, 350-watt mid-band CHIRP transducer clearly defines fish arches, structure, and bottom depth returns on your display. Midband Chirp Traditional Sonar This 8-pin, 350-watt bronze thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 800’ in saltwater and 1,200’ in freshwater. Broad Frequency Range Use the perfect frequency for the waters you’re fishing. Covering the medium frequency range, this transducer pulses from 85–165 kHz, displaying a wide coverage area, crisp fish arches, and accurate depth readings. Optimum Ping Sensitivity Offering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on your compatible chartplotter display. Thru-Hull Installation A durable bronze housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns. Auto-ID Technology Enjoy simple plug-and-play operation with Garmin auto-identification technology — which enables the sonar to automatically configure itself to the transducer being used. Fits Various Hull Types Configurable for a wide variety of boat hull materials, including fiberglass, composite, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–20° without a fairing block. In the Box: GT12M-THF transducer Jam nut Washer Documentation Specifications: Transducer Frequency: Medium band CHIRP (85-165 kHz) Transducer Power: 350 W Transducer Beamwidth: 24° -16° Transducer Maximum Depth: 800 ft saltwater / 1200 ft freshwater Transducer Cable Length: 50 ft Transducer Depth/Speed/Temperature: Depth, temperature Transducer Number of Pins: 8-pin Housing Material: Bronze Transducer Supported Deadrise/Transom Angles: 0° supports hull deadrise angles from 0° to 7°

GT12M Bronze Thru-Hull - 350W - 12 Degree Designed for reduced drag and optimum sonar performance on midsize fishing and cruising boats, this flush-mounted, 350-watt mid-band CHIRP transducer clearly defines fish arches, structure, and bottom depth returns on your display. Midband Chirp Traditional Sonar This 8-pin, 350-watt bronze thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 800’ in saltwater and 1,200’ in freshwater. Broad Frequency Range Use the perfect frequency for the waters you’re fishing. Covering the medium frequency range, this transducer pulses from 85–165 kHz, displaying a wide coverage area, crisp fish arches, and accurate depth readings. Optimum Ping Sensitivity Offering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on your compatible chartplotter display. Thru-Hull Installation A durable bronze housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns. Auto-ID Technology Enjoy simple plug-and-play operation with Garmin auto-identification technology — which enables the sonar to automatically configure itself to the transducer being used. Fits Various Hull Types Configurable for a wide variety of boat hull materials, including fiberglass, composite, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–20° without a fairing block. In the Box: GT12M-THF transducer Jam nut Washer Documentation Specifications: Transducer Frequency: Medium band CHIRP (85-165 kHz) Transducer Power: 350 W Transducer Beamwidth: 24° -16° Transducer Maximum Depth: 800 ft saltwater / 1200 ft freshwater Transducer Cable Length: 50 ft Transducer Depth/Speed/Temperature: Depth, temperature Transducer Number of Pins: 8-pin Housing Material: Bronze Transducer Supported Deadrise/Transom Angles: 12° supports hull deadrise angles from 8° to 15°

B117 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin The B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design minimizes drag with only 5mm (3/16") extending outside of the hull. The plastic P319 and stainless steel SS60 models are also available to accommodate all hull materials. Features Industry standard for low-profile transducers Depth and temperature Good target detail in shallow-water at 200 kHz and good deep-water bottom tracking at 50 kHz Right angle cable exit offers low headroom and protection when transducer is stepped on Included rubber washer allows tightening of the hull nut to irregular hull surfaces Housings are ABYC H-27 compliant Optional temperature sensor Bronze transducer housing Boat Size: 8M (25') and up Specifications: Weight: Bronze - 0.9 kg (2.0 lb) Hull Deadrise: Up to 8° Acoustic Window: Urethane Hole Diameter: 51mm (2") This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SS175HW Wide-Beam CHIRP - 20° Stainless Steel Thru-Hull Transducer - 1kW Requires Mix and Match Cable Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered. Features: Depth & fast-response water-temperature sensor High—CHIRPS from 150 kHz to 250 kHz 25° constant beamwidth 100 kHz of total bandwidth from one transducer Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth Boat Size: 8 m (25’) and above Hull Type: Steel or aluminum Exclusive Xducer ID® technology Specifications: Hull Deadrise: Up to 28° Acoustic Window: Urethane Weight: 2.7 kg (6 lb) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.