Water Booster System - 40 PSI - 4.5GPM - 12V The Flojet 2840 Series Booster Systems are designed to provide constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 GPM at 10 psi (0.7 bar). The pump is fully automatic, with a built-in inlet strainer, pressure switch, and check valve, and supplies smooth flow from trickle to full flow. Typical uses include applications where available water pressure is very low and fluctuates widely. Easy installation requires only that the water lines be connected, and the power cord plugged in. Features: Integrated pump and tank system It can be mounted vertically or horizontally Flow rates up to 4.5 US Gallons/min. Kit Consists of: 12V Quad MPU, 4.5 GPM, SW 40, 0.77 gal capacity accumulator tank, plastic mounting board, and pump inlet strainer WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Water Booster System - 40PSI - 4.5GPM - 115V The Flojet 2840 Series Booster Systems are designed to provide constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 GPM at 10 psi (0.7 bar). The pump is fully automatic, with a built-in inlet strainer, pressure switch, and check valve, and supplies smooth flow from trickle to full flow. Typical uses include applications where available water pressure is very low and fluctuates widely. Easy installation requires only that the water lines be connected, and the power cord plugged in. Features: Integrated pump and tank system It can be mounted vertically or horizontally Flow rates up to 4.5 US Gallons/min. Kit Consists of: 115V Quad MPU, 4.5 GPM, SW 40, 0.77 gal capacity accumulator tank, plastic mounting board, and pump inlet strainer WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Water Booster System - 40PSI - 4.5GPM - 24V The Flojet 2840 Series Booster Systems are designed to provide constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 GPM at 10 psi (0.7 bar). The pump is fully automatic, with a built-in inlet strainer, pressure switch, and check valve, and supplies smooth flow from trickle to full flow. Typical uses include applications where available water pressure is very low and fluctuates widely. Easy installation requires only that the water lines be connected, and the power cord plugged in. Features: Integrated pump and tank system It can be mounted vertically or horizontally Flow rates up to 4.5 US Gallons/min. Includes: 24V Quad MPU, 4.5 GPM, SW 40, 0.77 gal capacity accumulator tank, plastic mounting board, and pump inlet strainer WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Flojet D3131B5011A Duplex Ii Pmp 60Psi 1.5Gpm

Flojet 02840-000 M Water Sys 115V 4.5/40 Sw  Flojet- Diaphragm Pump Water Booster System 115V, 4.5GPM, 40psi Switch, 1.1 Gallon Accumulator Tank

Flojet 02840-000-Garden Hose Fitting Water Sys 115V 4.5/40 Sw  Flojet- Diaphragm Pump Water Booster System 115V, 4.5GPM, 40psi Switch, 1.1 Gallon Accumulator Tank, with Garden Hose Fittings

Flojet 02840-300 Water Sys 24V 4.5 gpm 40psi Sw  Flojet- Diaphragm Pump Water Booster System 24V, 4.5GPM, 40psi Switch, 1.1 Gallon Accumulator Tank

Flojet 02095-223 Pressure Switch Kit 40 PSI Flojet Pressure Switch Kit 40 PSI, 1/4" Male NPT Threaded Port Mount, Includes Buna, EPDM and Viton Rubber Membranes

Gianneschi IDROMINI-ACB61E-12V Bronze Pump 12V Water Pressure System Main Water Pressure System features: High quality, bronze self-priming centrifugal pump with star impeller Includes pressure switch, membrane tank, pressure gauge and no-return valve Painted steel with s/steel flange Tank capacity from 2 to 5 litres

Gianneschi IDROMINI-ACB80E-12V Bronze 12V Water Pressure System Main Water Pressure System features: High quality, bronze self-priming centrifugal pump with star impeller Includes pressure switch, membrane tank, pressure gauge and no-return valve Painted steel with s/steel flange or totally s/steel tank Tank capacity from 2 to 5 litres

Flojet 02840-210 230V 3.5Gpm 40 psi Booster System  Flojet- Diaphragm Pump Water Booster System 230V, 3.5GPM, 40psi Switch, 1.1 Gallon Accumulator Tank

Flojet D3131B5011A Duplex II Pump 60Psi 1.5Gpm Flojet Duplex II Diaphragm Pump, with Polypropylene Body Construction Buna Diaphragm Buna Check Valve Medium Pressure Cam 60 PSI Pressure Switch Motor is 12 Volt DC Inlet Port is 3/8 inch NPT Female Discharge Port is 3/8 inch NPT Female

SHURflo 80-120-01, Reverse Osmosis Booster System 220VAC The Shurflo 80-120-01 Pump is used for home RO water systems. It is a enclosed reverse osmosis booster low voltage motor. 220 Volts AC Input 80 PSI bypass valve Up to 50 GPD Continuous Duty 0.25" quick connect fitting

Flojet 02090-104 Standard 35 PSI Switch Flojet part 02090104 is a pressure switch replacement kit Applications: 4406-XXX 4306-5XX 4405-XXX 4305-5XX Direct mount

18916-0040 Replacement Pressure Switch - 40 PSI Compatible Series: 31595-Series 31600-Series 31620-Series 31630-Series WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.