Adapter Plate - Fusion 600 or 700 Series The MS-CLADAP adaptor plate is ideal for installation of a Fusion 600 or 700 Series stereo in a cutout made for a Clarion CMD4, 5, 6 or 7. Covering the mounting holes that would otherwise be visible, the adaptor plate makes a tidy, simple installation possible. Dimensions: External dimension (H x W) - 3-7/8” x 9-1/8”  Cutout dimension (H x W) – 2-1/8” x 7”  *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MS-RA670 and MS-RA60 Adapter Plate Kit  The Fusion Adapter Plate Kit specifically for -  755 Series 750 Series and  650 Series  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adapter Plate for Simrad HALO™ Open Array Radar Use for Modular Mounts - ADA-R1 Required The Seaview Top Plates are made from a pre-drilled plate that has been incased in a UV resistant ABS plastic. Drill templates come with all Seaview Top Plates. Simply drill the holes that are marked to your specific Simrad electronic. This makes for a very clean installation with no unecessary holes.

Volvo Penta 120S Stainless Steel Adapter Plate for Saildrive Split Rings Tecnoseal Volvo Adaptor Plates for 00706-1 Volvo Penta 120S split ring anode. Screws included.

Starlink Adapter Plate for 24" KVH Domes with Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel Fixed Base Features: 316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼” aluminum plate The ¼” aluminum plate is powder-coated white and fits inside an empty KVH 24” dome

Adapter Plate f/200 x 100 VESA Conversion The Majestic AD200 is designed as an Adaptor plate for the end of a bracket with a VESA of 100x100, to fit to the back a flat screen TV with a VESA of 200 x 100. The Majestic AD200 is designed as an Adaptor plate for the end of a bracket with a VESA of 100x100, to fit to the back a flat screen TV with a VESA of 200x100. IMPORTANT: You should only use an adaptor plate with a bracket that is rated to hold the size and weight of your TV.  Especially if you intend on using a swing arm bracket. The Majestic range of brackets have a VESA of up to 100x100.  The AD200 acts as an adaptor plate which fits to the 100x100 VESA mount bracket, allowing you to use the 200x100 hole spacing to fit to the 200x100 VESA on the TV. Majestic do not recommend fitting a 32" TV to a swing arm bracket when being used in the mobile environment.  Majestic recommend pairing the AD200 with the BKT100 and will cover warranty on this combination.  

C12x/e12x to Axiom Adapter Plate to Existing Fixing Holes Powder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom 12″ multifunction displays in place of a C12x/e12x Series Display.

A9X to Axiom 9 Adapter Plate to Existing Fixing Holes Powder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom 9" multifunction displays in place of a A9x Series Display.

A12X to Axiom 12 Adapter Plate to Existing Fixing Holes Powder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom 12" multifunction displays in place of a A12x Series Display.

Fillet & Prep Table Rail Mount Adapter Plate w/Hardware  Fillet Table Rail Mount Adapter Plate works on the 326580-3 and 326585-3 fillet tables and comes complete with hardware to mount the plate to the table. Accepts the 327199-1 Removable Rail Mount Clamp (sold separately).

C120/E120 Classic to Axiom 12 Adapter Plate to Existing Fixing Holes Axiom 12 adapter plate for legacy C120 / E120 Classic MFDs Fixing holes: Existing Model: Axiom 12 (All variants)

e7/e7D to Axiom 7 Adapter Plate to Existing Fixing Holes Axiom 7 adapter plate for legacy e7 / e7D MFDs Fixing holes: Existing Model: Axiom 7 (All variants)

E90W to Axiom Pro 9 Adapter Plate to Existing Fixing Holes Axiom Pro 9 adapter plate for legacy E90W MFDs Fixing holes: Existing Model: Axiom Pro 9 (All variants)

C70 Classic to Axiom 9 Adapter Plate to New Fixing Holes Powder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom 9" multifunction displays in place of a C70 Classic Display.

E120W to Axiom Pro 12 Adapter Plate to New Fixing Holes Powder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom Pro 12" multifunction displays in place of a E120W Display.