Sta-Plug Emergency Plug Sta-Plug™ is Forespar’s new form fitting emergency plug.  A soft cone shaped design allows it to easily fill the irregular shapes of hull impact breaches, as well as any round hole leak from a hose or through-hull.  Unique edge gripping riblets help hold the plug in a hole, keeping water out.  The riblets help Sta-Plug™ conform to the shape of the hole, sealing a leak near the edge where a tight fit is crucial, and holding the plug more securely in place. Different by design, Sta-Plug’s™ shape includes a series of concentrically larger riblets stepped along the length of the cone.  These riblets offer two big advantages over traditional straight edged emergency plugs: They help Sta-Plug™ conform to the hole near the edge where a tight fit is most crucial They help hold it more securely in place Twist and compress by hand to insert into hole Expands after insertion to hold in place Intended for temporary emergency use with continuous monitoring only, it gives the skipper greater peace-of-mind to allow them to focus on getting the boat to safety. Made from high density foam, Sta-Plug™ will remain soft and ready to go for years and will not mold or swell up like conventional wood plugs. Can be cut with a knife to use in irregular shaped holes, or torn by hand near the riblets to make smaller diameter plugs for smaller holes   Tearing at the 8th riblet creates a plug with a 2” diameter base Made from high density foam that is not susceptible to mold or swelling Bright orange color allows it to be quickly located in an emergency Dimensions: 9” High x 5” Diameter at base Made right here in the USA Not for Fuel Leaks

Sta-Plug® Mini Emergency Plug The Sta-Plug® Mini™, Forespar's form-fitting emergency plug. A soft cone-shaped design allows it to easily fill the irregular shapes of hull impact breaches, as well as any round hole leak from a hose or through-hull. Unique edge gripping riblets help hold the plug in a hole, keeping water out. Features: The Emergency Plug that Grips 4" High x 2" Diameter Convenient sized version of the popular Sta-Plug Emergency Plug Made from strong elastomer composites  Not susceptible to mold or swelling Bright color allows it to be quickly located Meets US Sailing Special Equipment Requirements Equipped with a lanyard hole Dimensions: 4" (10cm) high, 2" (5cm) diameter at base Made right here in the USA NOT INTENDED FOR FUEL LEAKS

Stainless Steel Mounting Bracket f/Side Mount Table Pedestal Polished stainless steel, side mount table pedestal removes when not in use for clear decks. Locking feature offers added mounting strength. Features: Polished stainless steel pedestal & table support Anodized aluminum bracket Locking pull pin offers added mounting strength Removable 125° bent leg Dimensions: 4-7/8"W x 4"H x 1/2"D Screw: #10 flat head / 1/4" hole. Benefits: Eliminates the need for mounting holes in boat deck and/or cockpit Easy to remove when not in use, for clear passage and storage Quick set-up and removal in tight spaces Increased leg & foot room

ConnectPro® Charging/Trolling System Receptacle & Plug ConnectPro® Receptacle Universal design for 2 or 3-wire configuration 12, 24, 12/24, 24/36 or 36 volt systems Watertight sealing cap Corrosion resistant, plated brass electrical components Drain holes in receptacle keep water away from electrical components Perma-Lock™ screw terminals will not loosen under extreme hull vibration Standard 1-1/8" diameter mounting hole Easy to install, with supplied mounting plate for front panel installation, or locking ring for rear access installation Accepts 10 and 8 gauge wire Easily replaces other trolling motor plugs and receptacles ConnectPro® Plug O-ring seal for waterproof connections Weather resistant plug cover Corrosion resistant, plated brass electrical components Accepts 16 to 8 gauge wire Ergonomic contoured grip for easy hook-up and ground blade alignment WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2-wire ConnectProTM Charging / Trolling System / Downrigger ConnectPro® Receptacle Works with 12, 24, or 36 volt 2-wire systems For front mount panel installations Weather resistant sealing cap Drain holes in receptacle keep water away from electrical components Perma-Lock™ screw terminals will not loosen under extreme hull vibration Fits standard 1-1/8" diameter mounting hole Accepts up to 10 gauge wire ConnectPro® Plug O-ring seal for waterproof connections Weather resistant plug cover Corrosion resistant, plated brass electrical components Accepts 16 to 8 gauge wire Ergonomic contoured grip for easy hook-up and ground blade alignment Max. rating is 40A WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Blanking Plug f/SeaTalk ng This blanking plug is a blanking plug for the SeaTalkng. Place blanking plug in unused SeaTalkNG Spur sockets to protect them.

ConnectPro® 3-Wire Plug Features: O-ring seal for waterproof connections Weather resistant plug cover Corrosion resistant, plated brass electrical components Accepts 16 to 8 gauge wire Ergonomic contoured grip for easy hook-up and ground blade alignment WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GP1203 SailPod Precut for Raymarine c125/c127 & e125/e127 for 9.5" Wide Guard GP1200 Series for 9.5" Guard, SailPods for sail are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications. All SailPods Include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners and wrench Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets

AC Adapter f/Rapid Chargers For use with BC191, BC193 & BC160 rapid chargers with US plug

Medium-Duty Trolling Motor Plug MotorGuide's Medium-Duty Trolling Motor Plug provides a solid, safe connection. Compatible with 12, 24 and 36 volt. Accepts 8 to 16 gauge wire. O-ring seal for waterproof connections. Ergonomic grip for easy hook-up and ground blade alignment. Corrosion resistant Plated brass electrical components Weather resistant plug cover WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Major Rebuild Kit for Sherwood F-95 This kit contains the following items   GY 211P-2 1 SQ-HD-PLUG 1/8-B MS DATA SHEET 1 DATA SHEET SH 10183 1 COVER ASSEMBLY SH 10515C 1 SCREW & WASHER SH 10615K 1 IMPELLER KIT SH 10927 1 SEAL/SEAT ASSEMBLY SH 10929 1 CAM SH 10931 1 VELLUMOID 505 FIBRE GASKET SH 12710 4 LOCKWASHER SH 1311 2 DOWELL PIN SH 1482 4 SCREW HEX HD 1/4"-20 x 1/2" SH 4257 1 BALL BEARING SH 4258 3 SNAP RING (SMALL) SH 4259 1 SNAP RING (LARGE) SH 4432 1 KEY     This kit is put together at time of order.

GP1809 SailPod Precut for Raymarine c95/c97 & e95/e97 for 9.5" Wide Pedestal Guard Part #: GP1809 NavPod Protects Your Electronics In Harsh Conditions The GP1809 SailPod is precut for Raymarine's c95/c97 & e95/e97 for a 9.5" wide pedestal guard.

GP1063 SailPod Precut f/Simrad NSS12 for 9.5" Wide Pedestal Guard Part #: GP1063 NavPod Protects Your Electronics In Harsh Conditions The GP1063 SailPod is precut for Simrad's NSS12 for 9.5" wide pedestal guard.

GP1049 SystemPod Precut f/Raymarine e9 (Plus Space) for 9.5" for Wide Pedestal Guard Part #: GP1049 NavPod Protects Your Electronics In Harsh Conditions The GP1049 SystemPod is precut for Raymarine's e9 with additional space for mounting other products. Made for 9.5" for wide pedestal guards. *See Literature tab for an image with dimensions

Groco 504-F Washer