Flotec FP0S3000X Thermoplastic Waterfall/Utility Pump 4/10 HP With a quality design providing years of trouble free service our line of Thermoplastic waterfall / Utility pumps can help turn your backyard into a garden oasis.   KEY FEATURES Oil free and fish safe Stainless steel or engineered composite construction - superior corrosion resistance Dual ball bearing design - quiet, long lasting, years of trouble-free service High performance - ideal for waterfalls and streams WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  4/10 MAXIMUM LIFT:  25' MAXIMUM CAPACITY:  3000 GPH FLOW at 10' LIFT:  1900 GPH SWITCH TYPE:  Manual Operation (No Switch) DISCHARGE PIPE SIZE:  1-1/4" (Ships With Multiple Adapters) MAXIMUM SOLIDS HANDLING SIZE:   AMP DRAW (full load):  3 Amps CORD LENGTH:  15' w/ grounded 3-prong plug VOLTAGE:  115v AC, 60 Hz MAXIMUM WATER TEMPERATURE:  100°F (38°C)

Flotec FP400C Sewage Pump System - 4/10 HP Economical sewage pump system manufactured of durable thermoplastic construction. Ideal for basement installations, pumping below-grade toilets, and laundry facilities. KEY FEATURES Maximum pumping capacities up to 5250 GPH Corrosion-resistant construction with multi-vane, non-clog vortex impeller Grommets accept 4" PVC inlet, 2" PVC discharge and vent Handles up to 2" solids WARRANTY 1 year limited warranty BODY CONSTRUCTION:  thermoplastic pump / structural foam basin HORSEPOWER:  4/10 MAXIMUM CAPACITY:  5250 GPH FLOW AT 10' LIFT:  2550 GPH SWITCH TYPE:  Tethered DISCHARGE PIPE SIZE:  2" MINIMUM PIPE SIZE:  2" MAXIMUM SOLID HANDLING SIZE:  2" CORD LENGTH:  8' AMP DRAW:  18.5 amps   VOLTAGE:  115v, 60 Hz

Flotec FPSE3601A Cast Iron Sewage Pump 1/2 HP Rugged, sewage and effluent pumps are capable of handling solids up to 2". Available in cast iron design for a variety of wastewater applications. Heavy-duty, rugged cast iron automatic submersible sewage pump Capable of handling 2" solids - ideal for basement installations, pumping below grade toilets, laundry facilities, underground parking, grain storage and construction sites Includes by-pass float switch for automatic or manual operation   BODY CONSTRUCTION:  CAST IRON HORSEPOWER:  1/2 MAXIMUM CAPACITY:  9000 GPH FLOW AT 10' LIFT:  5400 GPH SWITCH TYPE:  Tethered DISCHARGE PIPE SIZE:  2" NPT MINIMUM PIPE SIZE:  2" for sewage applications / 1-1/2" for effluent applications MAXIMUM SOLID HANDLING SIZE:  2" CORD LENGTH:  10' AMP DRAW:  13 amps VOLTAGE:  115v. 60 Hz RECOMMENDED BREAKER:  20 amp

Flotec FPP1850 Seal Kit The Flotec FPP1850 Shaft Seal and O-Ring Kit is for the Flotec FP4815 pump.  Remember that all Flotec, Simer and Sta-Rite parts are interchangeable as long as the part numbers are the same.

Flotec FPSE3200A Thermoplastic Sewage Pump Durable, corrosion-resistant thermoplastic construction with 2" solids handling makes the FPSE3200A a great candidate for variety of wastewater applications.   Automatic submersible sewage pump Capable of handling 2" solids - ideal for basement installations, pumping below grade toilets, laundry facilities, underground parking, grain storage and construction sites Durable, corrosion-resistant thermoplastic construction   BODY CONSTRUCTION: Thermoplastic HORSEPOWER: 4/10 MAXIMUM CAPACITY: 5250 GPH FLOW AT 10' LIFT: 2550 GPH SWITCH TYPE: Tethered SWITCH ON LEVEL: 12-1/2" SWITCH OFF LEVEL: 5-1/2" DISCHARGE PIPE SIZE: 2" MINIMUM PIPE SIZE: 2" for sewage applications / 1-1/2" for effluent applications MAXIMUM SOLID HANDLING SIZE: 2" CORD LENGTH: 8' AMP DRAW: 8.5 amps VOLTAGE: 115v, 60 Hz RECOMMENDED BREAKER: 15 amps

Flotec FP4875 Shallow Well Jet Kit Use on FP4300 series Flotec convertible jet pump Bolts to nose of pump to convert for shallow well use

Flotec CYCLONE™ Water Removal Utility Pump The CYCLONE™ pumping system is designed for every day or emergency use. Perfect for transferring or removing unwanted water from waterbeds, aquariums, or non-draining sinks.   KEY FEATURES Multipurpose pump designed for emergency dewatering, draining aquariums, waterbeds and clogged sinks Self-priming at 8-10 ft. vertically Corrosion-resistant, compact and portable WARRANTY 90-day limited warranty BODY CONSTRUCTION: Thermoplastic HORSEPOWER: 1/12 MAXIMUM LIFT: 43' MAXIMUM CAPACITY: 350 GPH FLOW at 10' LIFT: 300 GPH SWITCH TYPE: Manual Operation (No Switch) SUCTION SIZE: Male Garden Hose DISCHARGE SIZE: Male Garden Hose MAXIMUM SOLIDS HANDLING SIZE: Clear Water Only AMP DRAW (full load): CORD LENGTH: 6' w/ 3-prong grounded plug VOLTAGE: 115v AC, 60 Hz MAXIMUM WATER TEMPERATURE: 77°F (25°C)

Flotec FPP4322-08 Overhaul Kit Use with pump model FP4322 convertible jet pump Includes impeller, diffuser, and all seals and gaskets to overhaul pump Restores like-new performance

Seal and Gasket Kit for FP4112, FP4212, FP4122, and FP4222 Works with Flotec jet pump models FP4112, FP4212, FP4122, and FP4222 Provides all seals and gaskets used in one of the above models

Flotec FPZT7350 1/2 HP Zinc Body Submersible High Output Sump Pump, Vertical Switch A ½ HP version of our highly engineered sump line – this pump moves up to 6,000 gallons per hour! The vertical switch allows this pump to fit in a sump basin as small as 10” wide.   FEATURES Corrosion Resistant Zinc Construction - Dissipates heat quickly and extends motor life Uni-Body Motor Housing - Eliminates leak points and maximizes pump life Stainless Steel Fasteners and Hardware - Superior quality Quadra SealTM Technology - Provides superior motor protection over single seal designs Smooth Flow HydraulicsTM - Deliver high performance for demanding applications Vertical Float Switch - Operates in 10” basins or larger   3 year limited warranty BODY CONSTRUCTION:  Zinc HORSEPOWER:  1/2 MAXIMUM CAPACITY:  6,000 GPH FLOW at 10' LIFT:  4,140 GPH SWITCH TYPE:  Vertical Float FLOAT SWITCH 'ON' LEVEL:  7-1/2" FLOAT SWITCH 'OFF' LEVEL:  3" MINIMUM SUMP DIAMETER:  10" DISCHARGE PIPE SIZE:  1 1/2” NPT MAXIMUM SOLIDS HANDLING SIZE:  3/8" CORD LENGTH:  8' VOLTAGE:  115 VAC, 60 Hz

Scot Pump 913-VL 10 VENTED LOOP 1" The Vacuum Breaker has a normally closed poppet which keeps vent line fumes from the vessel. The breaker is designed for a corrosion proof service life with a protected air vent. All of the parts exposed to liquid are manufactured from Delrin. The external poppet spring is stainless steel. Liquid never touches the stainless steel spring.   The vacuum breaker has a low vacuum breakaway.   Pressure on the inside of the loop keeps the breaker closed. The soft, resilient seat gives quiet, trouble-free operation. The spring action provides a quiet opening and closing operation. Air goes in – never out.    • Type 316 Stainless Steel Loop with Vacuum BreakerStandard SAE ( Society ofAutomotive Engineers) Hose Barb on each end. • Use for Heads, Bilge Pumps, Shower Pumps, and Engine Exhaust Lines • Sizes 1/2 inch to 2 inches • All head flushing water and discharge lines, engine wet exhaust lines, and bilge pump lines should have a vented loop. • Use on marine heads, engine cooling systems, and bilge pumps.  

Johnson Clutch Pump 12V Double A Belt F9B-5007   Flexible Impeller Deck Wash Pump or Bilge Pump.   Heavy duty self priming pumps, which offer high flow rates and can handle bilge debris without damage. Supplied with electro-magnetic clutch for remote or automatic control.

Hypro 1320-0076, Roller Pump Kit PTO Adapter Roller Pump Kit Features Hypro 1320-0076 Shaft Adapter 1-3/8" ( 6 splines) PTO US, 34.9mm (6 splines) PTO Metric 5/16" Pump End US, 23.8mm Pump End Metric Forged Steel Material 540 RPM 1500, 1700, 7560, 7700 Pump Model

Johnson 10-13027 Series Clutch Pump FEATURES Pump Body: Bronze Ports: 2" NPT Cam: Full Impeller: Neoprene Standard Shaft Seal: Mechanical Drive: Electric Clutch Drive 7" Diameter     APPLICATIONS / CHARACTERISTICS Flexible Impeller Deck Wash Pump or Bilge Pump. Heavy duty self priming pumps, which offer high flow rates and can handle bilge debris without damage. Supplied with electro-magnetic clutch for remote or automatic control. Johnson Clutch Pump 24V Single B Belt F9B-5007

Johnson 10-13027 Series Clutch Pump Johnson Pump Less Clutch FEATURES Pump Body: Bronze Ports: 2" NPT Cam: Full Impeller: Neoprene Standard Shaft Seal: Mechanical Drive: Electric Clutch Drive 7" Diameter     APPLICATIONS / CHARACTERISTICS Flexible Impeller Deck Wash Pump or Bilge Pump. Heavy duty self priming pumps, which offer high flow rates and can handle bilge debris without damage. Supplied with electro-magnetic clutch for remote or automatic control. Johnson Clutch Pump Less Clutch F9B