Hypro 1610-0032, Key

Hypro 1610-0004, Key for 9203 and 9263 Series Replacement for: 9203C, 9203S, 9203C-R, 9203S-R, 9263C-C, 9263S-C, 9263C-CR, and 9263S-CR  

Hypro 1610-0015, Key For 9202C and 9262C For 9202C and 9262C-C Models

Hypro 3350-0032 3/4" Hose Barb Nylon Suction Strainer  Threads: 3/4" Hose Barb (all nylon) Screen: 50-mesh nylon   

Hypro 5500-5325, 5/8" Hollow Shaft Complete Assembly Replacement for: 5325C-H Models Kit includes one each of the following parts: Shaft with Cam Bearing Set Screws for Hollow Shaft Grease Fitting Assembly  Spline Key  Bearing Shield  Main Bearing (Ball Bearing) Bearing Retainer Ring (Shaft) 

AMT Pump 1610-000-00 Oring Buna-N

March 0115-0032-1000 Shaft 316 SS Shaft used with 1MD and 893  

March 0150-0032-1000 Cover  

March 0157-0032-1000 O'Ring Teflon For Te-8  

Jabsco 37072-0032 Motor &Amp; Pump 32V Qf  

Hypro 2221A-H, Pump 3Gpm 1500Psi 5/8

Hypro 4101Xl-H, Roller Pump   Performance Information   Max. flow: 7 gpm/26.5 lpm at 2600 rpm Max. pressure: continuous 100 psi/6.9 bar Max. pressure: intermittent 150 psi/10.3 bar Max. rated speed: 2600 rpm   Other Attributes   Rollers: Super Rollers standard (Poly, Teflon and Buna-N available) Housing: Cast Iron, Ni-Resist or Silvercast Port size: 3⁄4" NPT Shaft size: 5⁄8" Solid Pump shaft rotation: CW Shaft Seals: Viton standard (Buna-N available) Available shaft adapters Rotor: Cast Iron, Ni-Resist or Silvercast Standard rotation directly couples to gasoline engines Special torque arm and base kit is available for gas engines

Hypro 9910-650670, Damper Diaphragm   Hypro 9910-650670 is used in these unit(s):   Hypro 9910-D30 Hypro 9910-D30AP-A Hypro 9910-D30GRGI Hypro 9910-D30-B-GRGI Hypro 9910-50 Series Hypro 9910-D60 Series Hypro 9910-D70 Series *Requires 3 for use of unit

Hypro 6500C, Roller Pump with Nylon Rollers   This 6-roller pump is made of cast iron (including the housing, rotor, and pump body with side ports), so it can easily handle most harsh chemicals. This pump is not recommended for nitrogen or fertilizer. It features a 5/8" solid shaft, 3/4" ports, and a counter clockwise rotation. Its rotary design is built to last; it has a dependable design with no check valves, less friction, and a lower starting torque than its competitors.    The Hypro 6500C Roller Water Pump runs when the PTO or engine moves the pump shaft. The liquid enters into the unit, which causes the rotor and shaft assembly to turn. Then the rollers expel the fluid through the pump housing and nozzle. This Hypro 6-roller pump has a maximum flow rate of 22 GPM at 1200 RPM.    This hydraulic pump unit has a 3/4" port and Viton shaft seals. A 1" hose barb is included with your purchase.   Specifications   Hypro 6500C Roller Water Pump 6 roller pump Maximum flow rate of 22 GPM at 1200 RPM 5/8" solid shaft 3/4 inch port, 1" hose barb, and Viton shaft seals Quick coupler not included: Use ASC# 27305 Duel speed coupler 540/1000 RPM

Hypro 9303S-HM1C Centrifugal Pump w/Hyd Motor 114 gpm, 130 psi. Max Hydraulic 13 gpm. For Open/Closed Systems 1-1/2" NPT inlet, 1-1/4" NPT outlet.   Hypro 9303S-HM1C Centrifugal Pump.   Hypro centrifugal pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids: water, insecticides, herbicides, wettable powders, emulsives, liquid fertilizers, etc.   Hypro Series 9300 hydraulic motor-driven centrifugal pumps provide smooth performance. They can be conveniently mounted on the tractor or sprayer, becoming part of the vehicle’s hydraulic system and freeing the PTO for other uses. The Hypro “close-coupled” design reduces the mounting space required, eliminating long shafts and couplers between the pump and motor.   The broad, versatile line includes models with rugged housings of cast iron and stainless steel that stand up to strong chemical herbicides. Stainless steel pumps are ideal for use with Roundup® or other acid applications.   The series includes models 9303C-HM1C, 9303S-HM1C, 9303C-HM2C, 9303S-HM2C, 9303C-HM3C, 9303S-HM3C, 9303C-HM4C, 9303S-HM4C, 9303C-HM5C, and 9303S-HM5C.