|
JAHD240BT 2-Channel Bluetooth Amplifier - 80W
The waterproof JAHD240BT is on the forefront of technology with integrated Bluetooth technology allowing users to stream their audio content using a Bluetooth enabled device. Now, users can take their personal music library with them on all of their adventures.
All playback and volume options are controlled by the users Bluetooth enabled device.
Features:
Waterproof (IPX6)
Red LED power indicator
Epoxy potted enclosure
Corrosion resistant (ASTM B117)
Technical Specifications:
Number of Channels - 2
Frequency Response - 20Hz - 20KHz
2 Ohm RMS Power Per Channel - 1 x 80W
Signal-to-Noise Ratio - >95dB
Product Dimensions: (W x H x D) - 4.13" x 2.32" x 1.47"
∗SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
95.46 |
|
|
CPM50 Bluetooth Package - Amplifier & 5" Speakers
Combine the JENSEN JAHD240BT 2-Channel Bluetooth amplifier with a pair of JENSEN MS5006 5" speakers and you have a full, robust stereo system to play any music from your personal music library.
Waterproof and compact, this combination will make installation easy and the sound of music powerful.
The JENSEN MS5006 speaker is a pair of 30 watt waterproof 5" speakers with built in tweeter.
Features:
Bluetooth streaming audio (A2DP)
Waterproof (IPX6)
80 Watt amplifier
30 Watt speakers (Pair)
∗SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK
*Sold as a kit
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
135.77 |
|
|
MS-AM402 2 Channel Marine Amplifier - 400W
Features:
Marine Grade Chassis - Stainless steel end caps and bottom plate provide a stunning finish with added environmental protection.
Heat Sink Technology - Heat sink technology transfers heat more efficiently and offers more thermal stability for maximum component reliability.
Class-AB Design - The 400 Watt 2-Ohm stable (per channel) design ensures clean and powerful amplification of the input signal,enough to rock the boat.
Conformal Coated Circuitry - Provides added protection from salt air and moisture to ensure maximum product life.
RCA Line Out - A pass through the RCA output enables linking of multiple amplifiers for enhanced system performance.
2 Channels - Capable of powering 2 speakers, a sub (bridged) or 4 speakers in parallel.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
186.82 |
|
|
R1 550.2 2-Channel Marine Amplifier
Roswell’s R1 550.2 is the ideal amp to run an R1 tower speaker setup. It’s a 2-channel Class-D design that puts out 165 watts RMS per channel at 4Ω and 275 watts RMS per channel at 2Ω. It features calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCBs, and nickel-plated marine-grade wire terminals.
Features:
Ch 1-2 calibrated crossover (FULL/HPF/LPF)
Space-saving stackable design
Bridgeable 2-channel design
Marine-grade durability
4 Ohm Stable at 165 watts per channel
High-Efficiency Class-D Topology
2 Ohm Stable at 275 watts per channel
Conformal-coated PCBs
The lit logo power indicator lets you know your amp is receiving power
Nickel-plated wire terminals
Switchable Differential RCA inputs minimize interference and induced noise
Specifications:
Continuous Power (RMS): 4Ω: 165W x 2 / 2Ω: 275W x 2
Bridged: 4Ω: 550W x 1
Frequency Response: 10Hz – 25Hz
Input Sensitivity: 0.2–10.0V
HPF (High Pass Filter): 30Hz – 300Hz
LPF (Low Pass Filter): 30Hz – 300Hz
Bass EQ: 0-18dB @ 45Hz
Subsonic Filter: 10Hz – 55Hz
Phase Control: 0-180º
Dimensions: Inches: 1.90 x 7.0625 x 11.125 Centimeters: 4.83 x 17.94 x 28.26
|
330.00 |
|
|
ME70BT IPX6 4-Channel Marine Amplifier
Features:
Remote display keypad
4x45 Audio power out
100 Meter Bluetooth range
Phone/Android charging
USB music Player
AUX input
NMEA 2000® certified
Multiple EQ preset options
Backlit 3 line display with adjustable illumination
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
129.59 |
|
|
Apollo™ Monoblock & 4 Channel Marine Amplifier Mounting Bracket
Use this mounting bracket to easily install your Apollo Monoblock or 4 channel marine amplifier. Simply secure the mounting bracket to a flat surface and clip the amplifier in place, for a clean and tidy finish.
Technical Specifications:
Dimensions (WxHxD) - 4.72" x 6.08" x .39"
In the Box:
Mounting bracket
Four 8-gauge, self-tapping screws
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
12.23 |
|
|
Apollo™ 6 & 8 Channel Marine Amplifier Mounting Bracket
Use this mounting bracket to easily install your Apollo 6/8 channel marine amplifier. Simply secure the mounting bracket to a flat surface and clip the amplifier in place, for a clean and tidy finish.
Technical Specifications:
Dimensions (WxHxD) - 7.87" x 6.08" x .39"
In the Box:
Mounting bracket
Four 8-gauge, self-tapping screws
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
12.23 |
|
|
POWER760 4-Channel Amplifier - 760W
Time to stretch your sound muscles with the POWER760 4 channel amplifier. It tops out at 760W of peak power, has a protection circuit that safeguards against short circuits, DC offset and thermal overload, a channel mode selector which allows you to switch from 4, 3 or 2.
It's time to include this audio 4 channel amplifier in your sound system.
Features:
Designed to meet CEA-2006 test standards
Compact design allows great flexibility in mounting
MOSFET power supply
Channel mode selector switch - 4, 3 and 2 channel
Technical Specifications:
Number of Channels - 4
Frequency Response - 20Hz - 20KHz
2 Ohm RMS Power Per Channel - 2 x 190W
4 Ohm RMS Power Per Channel - 4 x 100W
4 Ohm RMS Power Bridge Channel - 4 x 75W
Overall Dimension (W x H x L) - 9" x 2.5" x 12.5"
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
129.67 |
|
|
Candy-X2B 2 Channel Amplifier - 800W
Small, compact, and powerful is what the DS18 Candy-X1B amplifier is all about. Just like edible candy, we have many different flavors to choose from to give audio enthusiasts goosebumps when they turn it up. Instead of making your mouth tingle, DS18 Candy Amplifiers make your ears tingle with pleasure when you hook them up to any line of pro audio, marine, and power sports audio.
These amps not only have the power to keep your speakers at maximum wattage efficiently, but they are also very small and compact in design so they can be mounted almost anywhere and still not have to worry about the room!
DS18 Candy amplifiers are perfect for people who want a very small audio footprint with also having all the benefits of a huge amplifier putting out lots of power in a small package.
Features:
One of our most popular lines of automobile amplifiers because of its power output to size ratio
Small and powerful design that gives it a wide range of versatility because of its size
High-grade components made to stand the test of time and give you loud sound on demand
RCA and Hi/Lo inputs so you can integrate this amp into your factory audio system easily
Technical Specifications:
Number of Channels - 2
Frequency Response - 20Hz - 20KHz
2 Ohm RMS Power (14.4V) Per Channel - 2 x 120W
4 Ohm RMS Power (14.4V) Per Channel - 2 x 80W
Signal-to-Noise Ratio - >100dB
Product Dimensions: (L x W x H) - 7.08" x " x 1.87" (18.0 x 12.7 x 4.75 cm)
*Sold as an Individual
|
155.94 |
|
|
Select S-1100.2 2 Channel Amplifier - 1800W
The SELECT series of amplifiers by DS18 is known for two things - legendary power and striking elegance.
This brushed aluminum amplifier adds a nice touch of sleekness to your sound system. Each amplifier has adjustable crossover settings, gain control, and Hi/Lo pass filters to deliver powerful and accurate sounds that will make you feel like you’re in a concert.
Own an elegant amplifier that provides awesome power and amazing reliability.
Features:
Surface mount component technology
Audio precision quality control verification
Multilayer PCB trace layout
Clipping, power, and protection LED indicator
Short circuit, thermal, and voltage protection
Precise filters so you can get the perfect sound from your speakers
Technical Specifications:
Number of Channels - 2
Frequency Response - 20Hz - 200KHz
2 Ohm RMS Power (14.4V) Per Channel - 2 x 80W
4 Ohm RMS Power (14.4V) Per Channel - 2 x 60W
Signal-to-Noise Ratio - >90dB
Product Dimensions: (L x W x H) - 7.4" x " x 1.87" (18.8 x 5.83 x 4.75 cm)
*Sold as an Individual
|
149.94 |
|
|
NXL-X1000.1D 1-Channel Marine Amplifier - 2000W
The DS18 NXL Series was developed for people who want a very small audio footprint that is capable of putting out lots of power and sound in a small and waterproof package.
The NXL Series of amps are one of our most efficient lines with great power output all while withstanding the elements.
Being a full-range amplifier, they can be integrated with and run on subwoofers, mid-ranges, and tweeters. The high pass and low pass filters will help you tune your speaker choice accurately so you can obtain crystal clarity from low volume levels all the way to the maximum for the ultimate audio experience.
All NXL Series amplifiers have stable and reliable 4-layer PCB layouts, an IP67 waterproof rating for power sports an ultra-compact size for easy installation, and audio precision quality control verification.
The NXL Marine Amplifier series is exactly what the outdoors lover will need for their boat or vehicle audio to brave the trails, enjoy the lake, or any situation that needs a strong versatile waterproof amplifier.
Features:
Multiple channel input selector - 2 or 4 channel
IPX6 Waterproof for Powersports applications
Ultra-compact size for easy installation
Audio precision quality control verification
Technical Specifications:
Number of Channels - 1
Frequency Response - 10Hz - 250KHz
2 Ohm RMS Power (14.4V) Per Channel - 600W
4 Ohm RMS Power (14.4V) Per Channel - 350W
Signal-to-Noise Ratio - >82dB
Product Dimensions: (L x W x H) - 11.8" x 4.4" x 1.77" (302mm x 112mm x 45mm)
*Sold as an Individual
|
599.94 |
|
|
NXL-X1200.5D 5-Channel Marine Amplifier - 2800W
The DS18 NXL Series was developed for people who want a very small audio footprint that is capable of putting out lots of power and sound in a small and waterproof package.
The NXL Series of amps are one of our most efficient lines with great power output all while withstanding the elements.
Being a full-range amplifier, they can be integrated with and run on subwoofers, mid-ranges, and tweeters. The high pass and low pass filters will help you tune your speaker choice accurately so you can obtain crystal clarity from low volume levels all the way to the maximum for the ultimate audio experience.
All NXL Series amplifiers have stable and reliable 4-layer PCB layouts, an IP67 waterproof rating for power sports an ultra-compact size for easy installation, and audio precision quality control verification.
The NXL Marine Amplifier series is exactly what the outdoors lover will need for their boat or vehicle audio to brave the trails, enjoy the lake, or any situation that needs a strong versatile waterproof amplifier.
Features:
Multiple channel input selector - 2 or 4 channel
IPX6 Waterproof for Powersports applications
Ultra-compact size for easy installation
Audio precision quality control verification
Technical Specifications:
Number of Channels - 5
Frequency Response - 10Hz - 200KHz
2 Ohm RMS Power (14.4V) Per Channel - 4 x 200W
4 Ohm RMS Power (14.4V) Per Channel - 4 x 150W
4 Ohm RMS Power Bridge (14.4V) Channel - 2 x 400W
Signal-to-Noise Ratio - >85dB
Product Dimensions: (L x W x H) - 12.67" x 4.4" x 1.77" (322mm x 112mm x 45mm)
*Sold as an Individual
|
719.94 |
|
|
NXL-M2 Full Range 2 Channel IPX5 Marine Grade Amplifier - 250 x 2W @ 4-Ohm
Designed for intense sessions that keep the party boat rocking all night long; the NXL-M2 is DS18’s high-quality, powerful amplifier for the aquatics lover looking for a big sound with a small footprint!
As a Class D Digital amplifier, the NXL-M2 uses a direct insert speaker and power terminals significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power.
The NXL-M2 handles 250W x 2CH @ 4 Ohms; 400W x 2CH @ 2 Ohms; and 880W x 1CH @ 4 Ohms Bridge of RMS Power and 1500W Peak Power.
Get clean, well-defined sound for with enough features (Fully Variable Bass Boost, Low Pass Filter, and High Pass Filter) to tune your music perfectly for optimal audio enjoyment! This full-range amplifier handles all speakers insanely well and has the features to make sure they play the way you want them to!
This amplifier is tough enough to stand up to the worst the waves throw at you! All controls are guarded by high-strength front covers that guarantee impenetrable defense against the elements; coated 4-layer PCB helps prevent corrosion caused by salt water; and Voltage, Thermal, and Short Circuit Protection for easy monitoring of your power levels.
Order the NXL-M2 for insane power out on the water!
Features:
IPX5 Water Resistance Grade
Hardware resistant to corrosion and UV Protection
Coated 4 Layers PCB to prevent corrosion
High level input for radio use
2 Tinned OFC RCA Inputs and Outputs
Front cover to keep the controls safe to the elements
LED Clip Indicator to easier adjustment
Stable and Reliable Class D Circuit Design
Sound Quality Verification Using AP Instruments
Direct Insert Power and Speaker Terminals
Short Circuit, Thermal, and Voltage Protection
Technical Specifications:
Number of Channels - 2
Frequency Response - 20Hz - 20KHz
2 Ohm RMS Power Per Channel - 2 x 400W
4 Ohm RMS Power Per Channel - 2 x 250W
4 Ohm RMS Power Bridge Channel - 1 x 880W
Signal-to-Noise Ratio - >90dB
Product Dimensions: (L x W x H) - 9.6" x 4.5" x 1.7"
*Sold as an Individual
|
479.94 |
|
|
MA4505 5 Channel Marine Amplifier
Weather-resistant & high-performance marine amplifier
The weather-resistant & high-performance JBL Marine amplifiers deliver impressive power from a compact chassis designed to withstand outdoor environments. Available with 4-channel and 5-channel outputs. JBL Marine amplifiers incorporate our latest amplifier topology that includes selectable all-, high-, or low-pass crossovers with variable electronic frequency adjustment for precision system tuning. Engineered for harsh marine conditions, with power and performance to meet the needs of any outdoor audio system, JBL Marine amplifiers are the perfect match for all of your JBL marine products.
Features:
1 amplifier
Stainless steel mounting hardware
Rubber inserts
4 High-level input adapters
3 spare fuses
2 2-color brand stickers
Quick start guide
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
445.14 |
|
|
NXL-X600.4D 4-Channel Marine Amplifier - 1600W
The DS18 NXL Series was developed for people who want a very small audio footprint that is capable of putting out lots of power and sound in a small and waterproof package.
The NXL Series of amps are one of our most efficient lines with great power output all while withstanding the elements.
Being a full-range amplifier, they can be integrated with and run on subwoofers, mid-ranges, and tweeters. The high pass and low pass filters will help you tune your speaker choice accurately so you can obtain crystal clarity from low volume levels all the way to the maximum for the ultimate audio experience.
All NXL Series amplifiers have stable and reliable 4-layer PCB layouts, an IP67 waterproof rating for power sports an ultra-compact size for easy installation, and audio precision quality control verification.
The NXL Marine Amplifier series is exactly what the outdoors lover will need for their boat or vehicle audio to brave the trails, enjoy the lake, or any situation that needs a strong versatile waterproof amplifier.
Features:
Multiple channel input selector - 2 or 4 channel
IPX6 Waterproof for Powersports applications
Ultra-compact size for easy installation
Audio precision quality control verification
Technical Specifications:
Number of Channels - 4
Frequency Response - 10Hz - 20KHz
2 Ohm RMS Power (14.4V) Per Channel - 4 x 200W
4 Ohm RMS Power (14.4V) Per Channel - 4 x 150W
4 Ohm RMS Power Bridge (14.4V) Channel - 2 x 400W
Signal-to-Noise Ratio - >85dB
Product Dimensions: (L x W x H) - 9.92" x 4.4" x 1.77" (252mm x 112mm x 45mm)
*Sold as an Individual
|
599.94 |
|