Adaptor Plate for Single 180 G2 Lopolight's Adaptor plate for single 180 G2. Specifications: Current consumption (mA @ 12VDC): 0 Current consumption (mA @ 24VDC): 0 Weight (Kg): 0 Kg Weight (Oz): 0.00 Oz Certification: This Navigation Light is certified by DNV, the Declaration of Conformity.

Adaptor Plate for Axiom 9 to C80/E80 Size Cutout *Will Require New Holes The Axiom 9 adapter plate is used when replacing an existing legacy C80 or E80 Classic Multifunction Display with an Axion 9 or Axion 9 RV requires new fixing holes.

Adapter Plate f/200 x 100 VESA Conversion The Majestic AD200 is designed as an Adaptor plate for the end of a bracket with a VESA of 100x100, to fit to the back a flat screen TV with a VESA of 200 x 100. The Majestic AD200 is designed as an Adaptor plate for the end of a bracket with a VESA of 100x100, to fit to the back a flat screen TV with a VESA of 200x100. IMPORTANT: You should only use an adaptor plate with a bracket that is rated to hold the size and weight of your TV.  Especially if you intend on using a swing arm bracket. The Majestic range of brackets have a VESA of up to 100x100.  The AD200 acts as an adaptor plate which fits to the 100x100 VESA mount bracket, allowing you to use the 200x100 hole spacing to fit to the 200x100 VESA on the TV. Majestic do not recommend fitting a 32" TV to a swing arm bracket when being used in the mobile environment.  Majestic recommend pairing the AD200 with the BKT100 and will cover warranty on this combination.  

Volvo Penta 120S Stainless Steel Adapter Plate for Saildrive Split Rings Tecnoseal Volvo Adaptor Plates for 00706-1 Volvo Penta 120S split ring anode. Screws included.

Mounting Plate for X01 Series Vertical Sidelights - Silver Mounting plate vert sidelights X01-series Specifications:  Mounting: Vertical Materials: Silver anodized aluminum 25μ, A4 stainless steel screws EAN: 5704438023420 Current consumption (mA @ 12VDC): 0 Current consumption (mA @ 24VDC): 0 Vessel size: All Sizes Weight (kg): 0.1kg Weight (oz): 3.53oz

Rudder Angle Sensor f/ Single Station  Technical Specifications: Measurement Range - 45° - 0 - 45° Signal Analogue - 3 - 180 Ohm Resistance value -  3 - 180 Ohm Operating Voltage - 6 - 24 Volt DC Communication - Analog Wire - 2 Wire system Sensor Signal - Insulated Return *Sold as an Individual  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Circular Baseplate for Horizontal Mount Lights - Aluminum - Silver Replacement aluminum base for horizontal lights. Compatible with: Lopolight horizontal mounted lights Features: Aluminum  Weight - 11.99oz In the Box: Baseplate Mounting hardware Instruction manual *Sold as an Individual

Circular Baseplate for Horizontal Mount Lights - Aluminum - Black Replacement aluminum base for horizontal lights. Compatible with: Lopolight horizontal mounted lights Features: Aluminum  Weight - 11.99oz In the Box: Baseplate Mounting hardware Instruction manual *Sold as an Individual

WD-RAD-01 Top Plate f/PowerTower® Radar Mounts - 4° Enhance the performance of your radome with the rugged, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway. Mounts between PowerTower® mount and base of radar. Compatible with: Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - AS 21RD4KW, HB 2124 CHIRP radars Lowrance - HALO20, HALO20+, HALO24, LRA-1800 / RB714A / DX42, LRA-2400 HD radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars Sitex - MDS-12 radar Features: Enhance the performance of your radome with the Universal Scanstrut 4° radar base wedge 4° Base Wedge for mounting under PowerTower® A rugged, marine-grade, UV stable wedge  Compatible with radomes from most radar manufacturers Technical Specifications: Material - Marine Grade Polymer Dimensions (L x W ) - 11.10" x 9.09" Angle - 4° In the Box: Wedge Base seal Instruction manual *Sold as an Individual

52MM (2-1/16") ViewLine Tank Level Gauge E/F - 3-180 Ohm -  Black Dial & Bezel Veratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use.  ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio. The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in identical color.  Interchangeable bezel option. Features: 8 pole Tyco/Hirschmann MQS plug  Red LED Via Plus And Min Warning Light Operating voltage 8–32 V  Input signal: standard Ω values  Optional make-point switch can be connected  Reverse polarity protection  Anti-fog double lens  Front side protection rating IP67  52 mm installation diameter  50 mm installation depth  In the Box: Gauge Connection Cable Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

ROKK Midi Top Plate f/Raymarine, Lowrance and B & G A multi-position, fully adjustable mount for small electronic devices.  Install fish finders, chartplotters and other electronics on the dashboard, navigation station and various other desired locations. The RL-504 is one (1) part of a system based around 4 different heavy-duty anodized aluminum mounts that allow your device to attach to the ROKK Midi to unlock its incredible features. Features: Engineered to withstand high shock loading. Device-specific top plate Technical Specifications: Material - ASA Plastic Dimensions (L x W) -  5.67" x 2.43" (144 x 61.75 mm) Compatible with the following products *Sold as an Individual

ROKK Midi Top Plate f/Humminbird and Raymarine A multi-position, fully adjustable mount for small electronic devices.  Install fish finders, chartplotters and other electronics on the dashboard, navigation station and various other desired locations. The RL-506 is one (1) part of a system based around 4 different heavy-duty anodized aluminum mounts that allow your device to attach to the ROKK Midi to unlock its incredible features. Features: Engineered to withstand high shock loading. Device-specific top plate Technical Specifications: Material - ASA Plastic Dimensions (L x W) -  5.35" x 1.89" (136 x 48 mm) Compatible with the following products *Sold as an Individual

ROKK Midi Top Plate f/Garmin, Simrad and B & G A multi-position, fully adjustable mount for small electronic devices.  Install fish finders, chartplotters and other electronics on the dashboard, navigation station and various other desired locations. The RL-507 is one (1) part of a system based around 4 different heavy-duty anodized aluminum mounts that allow your device to attach to the ROKK Midi to unlock its incredible features. Features: Engineered to withstand high shock loading. Device-specific top plate Technical Specifications: Material - ASA Plastic Dimensions (L x W) -  6.61" x 2.59" (168 x 65.7 mm) Compatible with the following products *Sold as an Individual

TP325 Top Plate f/Converting Merriman/Yacht Specialties Steering Systems to 12" Wide 1.25" Diameter AngelGuard 12" Top Plates are used for upgrading from an existing 1" diameter pedestal guard to a 1.25" StraightGuard or AngleGuard. Specifically designed for Converting Merriman or Yacht Specialties steering systems. 12" Top Plates Include: 316 Stainless Steel Mirror Polished Finish Precision Laser Cut

Vision Series Mounting Plate f/Raymarine Quantum, 2kW & 4kW Radar Domes With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68551 Vision Series Mounting Plate is designed for Raymarine Radar Domes (Quantum, Quantum 2, RD418D, RD424D, RD418HD, RD424HD). Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mount sold separately.