AL7211CR The AL7211CR (1-3/8"ID) is the perfect holder for boats in the 16 to 31 ft range. Its economical price and small footprint (3"x 5") make it our most popular center rigger holder. The receiving tube of this marine grade anodized holder is set at a 45 degree angle. This is the perfect angle for boats where the mounting position is low and the cockpit is not extremely deep (e.g. mounting on T-Tops, Hard Tops, or Fly-Bridges). Compatible poles are 12 or 14ft in length and come standard in bright silver anodized finish with a Black Spike. Recomended poles for AL7211CR AO8712CR - 12 ft Center Rigger (Mk II) AO8714CR - 14 ft Center Rigger (Mk II) MX8712CR - 12 ft MX Step- Tube Style

AL7301CR Fits 1.050" Pipe The AL7300 (1-3/8"ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.

AL7302CR Fits 1.315" Pipe The AL7300 (1-3/8"ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.

AL7303CR Fits 1.660" Pipe The AL7300 (1-3/8"ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.

AL7304CR Fits 1.900" Pipe The AL7300 (1-3/8"ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.

MX Pro Series Fixed Angle Center Rigger Holder - 45° - 1.5" ID - Bright Silver The Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by. MX Pro Series (1-1/2"ID) is the solution for boats with a tower or when a lower angle is desired Slightly larger footprint (5"x 7") Ruggedly constructed from marine grade anodized aluminum Can be easily attached above or below the standing platform or any flat surface Anodized in Bright Silver it is as strong as it is attractive

MX Pro Series Fixed Angle Center Rigger Holder - 22° - 1.5" ID - Bright Silver The Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by. MX Pro Series (1-1/2"ID) is the solution for boats with a tower or when a lower angle is desired Slightly larger footprint (5"x 7") Ruggedly constructed from marine grade anodized aluminum Can be easily attached above or below the standing platform or any flat surface Anodized in Bright Silver it is as strong as it is attractive

MX Pro Series Fixed Angle Center Rigger Holder - 30° - 1.5" ID - Bright Silver The Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by. MX Pro Series (1-1/2"ID) is the solution for boats with a tower or when a lower angle is desired Slightly larger footprint (5"x 7") Ruggedly constructed from marine grade anodized aluminum Can be easily attached above or below the standing platform or any flat surface Anodized in Bright Silver it is as strong as it is attractive

Rod Holder - Heavy Duty - 0° - Stainless Steel The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.

Rod Holder - Medium - 0° - Stainless Steel The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.

Center Rigger Holder - 1-5/16" IPS Pipe - 1-1/8" Holder Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. Fits 1" Pipe Size.

Flush Mount Rod Holder RH-525SS Medium 30° Stainless Steel The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Flush Mount Rod Holder RH-527VS Medium 0° Stainless Steel The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Flush Mount Rod Holder RH-529HS Medium 15° Stainless Steel The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Flush Mount Rod Holder RH-530 Large 30° Stainless Steel The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.