|
Center Rigger Single Rig
RK0322RK/CR
1 - Hanks Black Braided Line
1 - Black's Release Clips
1 -5⁄16" x 12" Tension Cords
1 - Eye Straps with Screws
2 - Snap Swivels
1 - Ball Stops
|
51.92 |
|
|
Center Rigger Single Rig - No Release Clip
1 - Hanks Black Braided Line
1 - 5/16in x 12in Tension Cords
1 - Eye Straps with Screws
2 - Snap Swivels
1 - Ball Stops
*Release Clip NOT Included
|
38.86 |
|
|
MX7000CR
Adjustable Angle holders MX7000CR (1-1/2" ID) are our strongest and most versatile holders. The three point mounting distributes the stress and provides side support. This heavy duty unit allows you to set your outrigger angle for maximum efficiency. The angle is set by positioning the clamp on the main tube during installation. The main tube of this unit is designed to accept the outrigger in either end so the holder can be mounted above or below any flat surface. A fast pin can be substituted for the bolt connecting the clamp to the wing for bridge laydown capability. Approximate area required for mounting is 14-1/2" x 18".
Recomended poles for MX7000CR
AO8716CR - 16 ft Center Rigger (Mk II)
AO8718CR - 18 ft Center Rigger (Mk II)
MX8712CR - 12 ft MX Step- Tube Style
MX8715CR - 15 ft MX Step- Tube Style
MX8718CR - 18 ft MX Step- Tube Style
MX8716CX - 16 ft MX Step- Tube Style - Single Spreader
MX8720CX - 20 ft MX Step- Tube Style - Double Spreader
|
502.62 |
|
|
MX8000CR
Adjustable Angle holders MX8000CR (1-5/8" ID) are our strongest and most versatile holders. The three-point mounting distributes the stress and provides side support. This heavy duty unit allows you to set your outrigger angle for maximum efficiency. The angle is set by positioning the clamp on the main tube during installation. The main tube of this unit is designed to accept the outrigger in either end so the holder can be mounted above or below any flat surface. A fast pin can be substituted for the bolt connecting the clamp to the wing for bridge laydown capability. Approximate area required for mounting is 14-1/2" x 18".
Recommended poles for MX8000CR
MX8719CR - 19 ft MX Step- Tube Style
MX8716CX - 16 ft MX Step- Tube Style - Single Spreader
MX8719CX - 19 ft MX Step- Tube Style - Single Spreader
MX8720CX - 20 ft MX Step- Tube Style - Double Spreader
MX8722CX - 22 ft MX Step- Tube Style - Single Spreader or Double Spreader
|
516.32 |
|
|
AL7001CR
The AL7001CR (1-3/8"ID) is the solution for boats with a tower or when a lower angle is desired. It has a slightly larger footprint (4"x 7"). Ruggedly constructed from marine grade anodized aluminum. It can be easily attached above or below the standing platform or any flat surface. It comes in a standard angle of 22 degrees that gives it a low rise. Anodized in Bright Silver it is as strong as it is attractive. It accepts all the same poles as the AL7000 series holders.
|
220.15 |
|
|
AL7211CR
The AL7211CR (1-3/8"ID) is the perfect holder for boats in the 16 to 31 ft range. Its economical price and small footprint (3"x 5") make it our most popular center rigger holder. The receiving tube of this marine grade anodized holder is set at a 45 degree angle. This is the perfect angle for boats where the mounting position is low and the cockpit is not extremely deep (e.g. mounting on T-Tops, Hard Tops, or Fly-Bridges). Compatible poles are 12 or 14ft in length and come standard in bright silver anodized finish with a Black Spike.
Recomended poles for AL7211CR
AO8712CR - 12 ft Center Rigger (Mk II)
AO8714CR - 14 ft Center Rigger (Mk II)
MX8712CR - 12 ft MX Step- Tube Style
|
108.00 |
|
|
AL7301CR
Fits 1.050" Pipe
The AL7300 (1-3/8"ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.
|
103.85 |
|
|
AL7302CR
Fits 1.315" Pipe
The AL7300 (1-3/8"ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.
|
103.85 |
|
|
AL7303CR
Fits 1.660" Pipe
The AL7300 (1-3/8"ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.
|
103.85 |
|
|
AL7304CR
Fits 1.900" Pipe
The AL7300 (1-3/8"ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.
|
103.85 |
|
|
Top Gun Single Rigging Kit with Nok-Outs for Riggers Up To 20'
Complete rigging packages that allow you to run one (1) line on each rigger. This kit includes (2) exclusive Rupp single pulley shock cords, 50 ft of white braided nylon halyard lines one pair of Rupp Nok-Out release clips. (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (2) Swivels. This rigging kit is for small outriggers, 20' and under.
|
146.38 |
|
|
Rupp Single Rigging Kit W/Lok-Ups & Nok-Outs - 160' Black Mono
Complete rigging packages that allow you to run one (1) line on each rigger. This kit includes (2) exclusive Rupp single pulley halyard line locks with shock cords, 160ft of 400lb black mono-filament halyard lines one pair of Rupp NOK-OUT release clips, (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (4) Crimp Sleeves.
|
186.82 |
|
|
Single Rigging Kit w/Klickers - Black Mono
Complete rigging packages that allow you to run One (1) lines on each rigger. this kit includes (2) exclusive Rupp single pulley shock cords, 160ft of BLACK MONO halyard lines one pair of Rupp KLICKER release clips. (2) Nylon ball stops, (2) Strap Eyes, (4) Heavy Snap Swivels, (4) Crimps-Nickel.
|
134.82 |
|
|
Single Rigging Kit w/Nok-Outs - Black Mono
Complete rigging packages that allow you to run One (1) lines on each rigger. this kit includes (2) exclusive Rupp single pulley shock cords, 160ft of BLACK MONO halyard lines one pair of Rupp NOK-OUT release clips. (2) Nylon ball stops, (2) Strap Eyes, (4) Heavy Snap Swivels, (4) Crimps-Nickel.
|
158.89 |
|
|
Pro Series Single Rigging Kit
Features:
Mesh Bag
50yd spool LP 400lb Blue Outrigger Mono
2 1 ¼” black stops, 2 release clips
2 Tigress Single Locking Halyards
Crimps and Snap Lock Swivels
|
112.49 |
|