|
LUTZ 0122-205, Drum Pump Tube
FEATURES
Pump Body:Kynar PVDF, 39 Inch Tube
Impeller:ETFE
Shaft:Hastelloy C
Shaft Seal:The drive shaft of this pump tube is not sealed. The bearing housing unit behind the impeller is designed to prevent pumped liquid from rising between the shaft and the inner tube.
APPLICATIONS
Lutz pump tubes are immersible centrifugal pumps.
The drive shaft of this pump tube is not sealed.
The bearing housing unit behind the impeller is designed to prevent pumped liquid from rising between the shaft and the inner tube.
This device guides the liquid which penetrates between the drive shaft and the shaft bearing back into the container being drained.
Features:
• Suitable for highly corrosive chemicals and neutral liquids in non-explosive areas
• Optional with electric or air driven motors
• No grease fillings
• Optimized drum drainage
• Modular, service friendly design
Applications:
The robust Lutz pump tube with mechanical seal or sealless is suitable for pumping clean and dirty, thin-bodied and slightly viscous, aggressive and non-aggressive liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Liquid examples: Highly concentrated acids and alkalis, bromic acid, sulphuric acid, nitric acid, dimethyle phthalate, potassium bromate, hydrofluoric acid, etc.
|
731.25 |
|
|
Lutz 0110-200, MSL-PP-41-R-HC-27" Drum Pump Tube
|
530.63 |
|
|
LUTZ Drum Pump Tube 0103-021
Lutz RE88-PP-39" Drum Pump Tube
Immersion depth: 39" / 1000 mm
Suitable for complete drum drainage with corrosive and neutral, aqueous up to slightly viscous liquids in non-explosive areas.
Environmentally friendly and cost-efficient.
The Lutz complete drum drainage pumps RE are suitable in applications in which toxic, hazardous and valuable liquids need to be drained almost completely from drums and containers.
Liquids:
Acids, alkalis, galvanic solutions, hydrazine, phosphates, sulfates, nitrates, etc.
Features:
Optimized drum drainage with a residual quantity of approx. 0,1 litres
Optional with electric or air driven motors
No grease fillings
Benefits:
No problematic tipping for emptying of remaining residual liquid
Maximum product utilisation at reduced drum cleaning and waste disposal costs
No leakage at inclined position or removal of the pump tube
Lube-free pump tube, thus no contamination of the liquid
Materials: RE-PP MS
Housing: Polypropylene
Seals: FPM
Mechanical seal: Carbon, ceramic, FPM, HC-4 (2.4610)
Bearing: Pure carbon
Drive shaft: Stainless steel (1.4571)
Impeller: Polypropylene
Immersion tube diameter: 41 mm
Temperature of medium: max. 50 °C
Hose connection: G 1 1/4 OT
Capacity
Flow rate:* max. 69 l/min
Pumping head:* max. 15 m wc
Viscosity:** max. 1000 mPas
*determined with water at 20 °C **determined with oil
|
1497.60 |
|
|
LUTZ Mixing Pump Tube 0103-150
Lutz MPMS-PP 50/41 L SS 39" Mixing Drum Pumps
Immersion depth: 39" / 1000 mm (sealless)
Suitable for highly corrosive, aqueous up to slightly viscous liquids in non-explosive areas.
Liquid examples:
Hydrochloric acid, sulphuric acid, hydrofluoric acid, etc.
Features:
Optional with electric or air driven motors
No grease fillings
Optimized drum drainage
Modular, service friendly design
Axial-flow rotor (R) for higher flow rates
Benefits:
Lube-free pump tube, thus no contamination of the liquid
All-purpose resistant PTFE shaft bearing
Easy maintenance without special tools
Sealing modules of mechanical sealed (MS) resp. of sealless (SL) pumps are replaceable.
Materials PP-SL
Housing: Polypropylene/PVDF
Bearing: ETFE / PTFE
Drive shaft: Hastelloy C (2.4610)
Impeller: PP
Immersion tube diameter: 41 mm
Temperature of medium: max. 50 °C
Hose connection: G 1 1/4 OT
Capacity
Flow rate:* max. 170 l/min
Pumping head:* max. 12 m wc
Viscosity:** max. 350 mPas
*determined with water at 20 °C **determined with oil
|
1193.47 |
|
|
LUTZ 0132-305, Drum Pump Tubes MSL-ALU-L-39"
|
633.75 |
|
|
LUTZ 0150-004, Drum Pump Tube MSL-SS-41-L-39"
|
881.10 |
|
|
LUTZ 0150-001, Drum Pump Tube MSL-SS-41-R-39"
39” stainless steel high volume rotor
|
881.10 |
|
|
LUTZ 0150-002, Drum Pump Tube MSL-SS-41-R-47"
|
928.80 |
|
|
LUTZ 0150-115, Drum Pump Tube MSL-SS-41-R-63"
|
1376.10 |
|
|
LUTZ 0151-001, Drum Pump Tube with TRI-CLAMP MMS-SS-39"
|
878.40 |
|
|
FINISH THOMPSON PFP-27 DRUM PUMP 27" PF POLY
Sealless, High Performance Drum Pump
Unique double suction impeller provides high flow and high head.
Features include:
Polypropylene, PVDF, or 316SS tubes
Interchangeable with motors
Greater flow control with variable orifice discharge (PFM/PFP/PFV only)
Up to 2000 cP with M58P/M59P motors
FDA-compliant option (Click here for more information)
Built-in hose and cord clips (PFM/PFP/PFV only)
Available Lengths:
27, 40, 48, 60, 72 in (69, 102, 122, 152, 183 cm)
Tube Diameter:
2 in (5.1 cm)
Discharge Size:
1 in (2.54 cm)
Discharge Type:
Hose barb w/ variable orifice
Hose Size:
1 in (2.54 cm)
Electric Motor
Air Motor
Maximum Flow:
40 gpm (151 lpm)
22 gpm (83 lpm)
Maximum Head:
80 ft (24 m)
38 ft (11.6 m)
Maximum Specific Gravity:
1.8
1.8
Maximum Viscosity:
2000 cP
330 cP
Tube Material:
Polypropylene
Shaft Material:
Alloy 625
O-ring Material:
FKM
Impeller Material:
PVDF
Maximum Temperature:
160º F (71º C)
Minimum Temperature:
35º F (1.7º C)
|
452.81 |
|
|
LUTZ 0201-522, LAB PUMP & MOTOR
B2-VARIO-PP-SL-19" B2 Vario PP-SL Drum Pump Tube
|
734.06 |
|
|
LUTZ 0110-205 Drum Pump Tube
Lutz Drum and Container Pump MSL-PP-41-L-HC-39" for non-flammable liquids
Lutz Drum Pumps model MSL-PP 41 is for use with acids and alkalis
Applications: The robust Lutz pump tube with mechanical seal or sealless is suitable for pumping clean and dirty, thin-bodied and slightly viscous, aggressive and non-aggressive liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Liquid examples: Acids, alkalis, galvanic fluids, phosphates, nitrates, sulphates, chlorates, etc.
Lutz Multipurpose Sealless Polypropylene Pump Tube
Bearing Housing: ETFE / PTFE
Drive Shaft: HC-4 (2.4610) Stainless Steel (316 Ti)<
Impeller Code: Radial-Flow Impeller
Impeller Material: PP
Length: 39"
Tube Housing: Polypropylene
Tube Type: MSL-PP
|
558.75 |
|
|
LUTZ 0110-215, Drum Tube MSL-PP-41-R-HC-63"
|
800.10 |
|
|
LUTZ 0110-201, Drum Pump Tube MSL-PP 41 R HC 39"
|
558.75 |
|