|
RTA-61 Cable-Steer Quick Release Bracket
For quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet and secure locking system. Fits foot control motors with up to a 45" shaft and hand control motors with up to a 52" shaft. They are designed to handle the increased torque of QUEST series motors.
Features:
Recommended for the higher thrust associated with Ultrex™ QUEST™ series motors
Allows trolling motors to be quickly removed from and reattached to the boat deck
Top and bottom plates slide together and are tightened/secured to one another using dual-locking hardware
Solid, anodized aluminum construction
Includes both 5/16" and 1/4" stainless steel mounting hardware
Brackets can be secured with a padlock (not included) for additional security
Fits 45" shafts and smaller foot-control motors and 52" shafts and smaller hand-control motors
|
168.97 |
|
|
MKA-62 Cable-Steer Quick Release Bracket
For quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet, secure locking system. Fits 52" to 72" shaft foot-control motors and 62" shaft hand-control motors. They are designed to handle the increased torque of QUEST series motors.
Features:
Recommended for the higher thrust associated with Ultrex™ QUEST™ series motors
Allows trolling motors to be quickly removed from and reattached to the boat deck
Top and bottom plates slide together and are tightened/secured to one another using dual-locking hardware
Solid, anodized aluminum construction
Includes both 5/16" and 1/4" stainless steel mounting hardware
Brackets can be secured with a padlock (not included) for additional security
Fits 52" to 72" shaft, foot-control motors, and 62" shaft hand-control motors
|
187.75 |
|
|
MKA-32 Electric Steer Quick Release Bracket with Cover
Features:
Designed for fast removal of any Terrova™, PowerDrive™ V2, or PowerDrive bow-mount trolling motor
Cam-lock design features ultra-tight tolerances that eliminate bracket movement and noise
The locking lever includes a pin and lanyard
Upper and lower plates include slots for securing with a padlock (not included)
Includes a composite cover that attaches to the lower half of the bracket when the motor is removed, keeping the deck profile clean
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
146.35 |
|
|
RTA-55 Quick Release Bracket
Easily remove your electric-steer, bow-mount trolling motor featuring QUEST technology. High-yield composite construction is super strong and impervious to corrosion and specifically designed for higher thrust motors and longer shaft lengths. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).
Designed specifically for motors featuring QUEST technology to meet the increased stress created by high thrust motors and long shaft lengths
Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck
Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck
Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration
Locking handle can be secured with padlock (not included) for additional security
Compatible with electric steer motors featuring QUEST technology
Designed for use in freshwater or saltwater
|
348.70 |
|
|
RTA-17 Composite Quick Release Bracket
Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with 72" shaft length motors.
Features:
Allows trolling motor to be quickly removed from and reattached to boat deck
Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck
Composite construction resistant to rust, corrosion, and discoloration
Includes stainless steel mounting hardware and locking pin
Locking handle can be secured with padlock (not included) for additional security
Compatible with Riptide Ulterra, Riptide Terrova, Riptide ST, Riptide PowerDrive, and Riptide SP
NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the RTA-54 model.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
77.54 |
|
|
RTA-62 Quick Release Bracket
Easily remove your electric steer, bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (padlock not included; sold separately). NOTE: Recommended for 112 lb. thrust and 72" and 87" shaft trolling motors.
Features:
Designed to meet the increased stress created by high-thrust motors and long shaft lengths
Allows bow-mount trolling motors to be quickly mounted and/or removed from the boat deck
The low-profile design attaches the trolling motor to the top bracket and drops in over the deck-mounted puck
Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration
The locking handle can be secured with a padlock (not included) for additional security.
Designed for use in freshwater or saltwater
|
200.50 |
|
|
MKA-57 Quick Release Bracket
The bracket and top plate allow you to easily slide the motor inboard (10") or easily remove it for storage and security. Features anodized aluminum construction with stainless steel components and hardware for optimal corrosion protection in all saltwater or freshwater environments.
Features:
Slide motor inboard 10" for a better boat cover fit and more clearance when launching the boat
Designed specifically for motors featuring QUEST technology to meet the increased stress created by high-thrust motors and long shaft lengths
Allows trolling motors to be quickly removed from and reattached to the boat deck
The dual Cam-lock design reduces bracket movement and noise
Includes stainless steel mounting hardware, a lanyard, and a locking pin
Upper and lower plates include slots for securing with a padlock (not included) for added security
Compatible with electric steer motors featuring QUEST technology
Designed for use in freshwater or saltwater
|
435.86 |
|
|
Riptide® Saltwater Composite Quick Release Bracket
RTA-19
Allows for easy removal of any Riptide® SM or Riptide SE bow-mount trolling motor
High-yield composite construction is super strong and impervious to corrosion
Low-profile design leaves deck clear when motor is removed
Locking handle with stainless steel pins can be secured with padlock (not included).
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
95.89 |
|
|
MKA-16-03 Quick Release Bracket
For quick, easy removal of your electric-steer, bow-mount trolling motor. Extruded aluminum design with side screw provides quiet and secure locking system.
Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40.
- Allows trolling motor to be quickly removed from and reattached to boat deck
- Sidescrew design attaches trolling motor to top bracket and slides into - deck-mounted bottom bracket, secured with tightening screw
- Solid, anodized aluminum construction
- Includes stainless steel mounting hardware
- Brackets can be secured with padlock (not included) for additional security
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
64.03 |
|
|
MKA-56 Quick Release Bracket
Easily remove your electric steer, bow-mount trolling motor featuring QUEST technology. High-yield composite construction is super strong and impervious to corrosion and is specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. The locking handle with stainless steel pins can be secured with a padlock (padlock not included, sold separately).
Features:
Designed specifically for motors featuring QUEST technology to meet the increased stress created by high-thrust motors and long shaft lengths
Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck
Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck
Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration
Locking handle can be secured with padlock (not included) for additional security
Compatible with electric steer motors featuring QUEST technology
Designed for use in freshwater or saltwater
|
348.70 |
|
|
MKA-21 Composite Quick Release Bracket
Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with 72" shaft length motors.
Features
Allows trolling motor to be quickly removed from and reattached to boat deck
Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck
Composite construction resistant to rust, corrosion, and discoloration
Includes stainless steel mounting hardware and locking pin
Locking handle can be secured with padlock (not included) for additional security
Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40
NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the MKA-53 model.
Designed for use in freshwater
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
78.46 |
|
|
MKA-51 Quick Release Bracket
The bracket and top plate allows you to easily slide the motor inboard (up to 6"), or easily remove it for storage and security. Features corrosion-resistant anodized aluminum construction with stainless steel hardware.
Compatible with Ulterra™, Terrova®, PowerDrive™, PowerDrive V2 and DeckHand 40.
Features:
Slide motor inboard 6” for a better boat cover fit and more clearance when launching boat
Allows trolling motor to be quickly removed from and reattached to boat deck
Cam-lock design reduces bracket movement and noise
Includes stainless steel mounting hardware, lanyard, and locking pin
Upper and lower plates include slot for securing with padlock (not included) for added security
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
229.96 |
|
|
MKA-64 Quick Release Bracket
Easily remove your electric steer and bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (padlock not included; sold separately). NOTE: Recommended for 112 lb. thrust and 72" shaft trolling motors.
Features:
Designed to meet the increased stress created by high-thrust motors and long shaft lengths
Allows bow-mount trolling motors to be quickly mounted and/or removed from the boat deck
The low-profile design attaches the trolling motor to the top bracket and drops in over the deck-mounted puck
Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration
The locking handle can be secured with a padlock (not included) for additional security
Designed for use in freshwater
|
200.50 |
|
|
MKA-42 Quick Release Bracket
For quick, easy removal of your Fortrex or Maxxum bow-mount trolling motor. Extruded aluminum design of these brackets features a side screw that provides a quiet and secure locking system. Ultra-tight tolerances eliminate bracket movement and noise. Fits 42" shaft foot control motors, 42" and 52" shaft hand control motors.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
128.06 |
|
|
ProMount Quick Release Mounting Bracket
For years anglers have been demanding a strong, low profile, quick release bracket for holding their fishing electronics. Designed to handle today's most popular sonar units, GPS or portable radios. The ProMount Quick Release Bracket makes it possible to easily remove your electronics weighing up to three pounds from a permanently mounted base with one hand. The 360-degree swivel adjustment lets you see the unit from any angle. The Pro Mount will fit nearly all Lowrance, Garmin, Eagle, Hummingbird, Pin-Point and Vexilar electronics. The permanent base is available separately too, which makes it easy to place several bases around the boat or even in another boat. Several systems have been mounted in trucks to hold GPS units with great success.
The ProMount sells for much less than current brackets, but with more features and versatility. The sleek, low profile of the ProMount is only 1 1/8 inches high. The permanent base has no sharp edges to step-on or wear a hole in your boat cover. An optional installation hole cover spacer comes with every base to give you a well finished look to the mount when installed. Your electronics can also be mounted overhead and hang down on the secure locking rail system of the ProMount to increase the potential places you can mount electronics. The ProMount Quick Release Bracket comes with all stainless steel mounting hardware and the bracket is corrosion resistant. The ProMount is self-draining and easy to clean, so it even looks good when the electronics are not in your boat.
Features:
360-degree swivel adjustment
Sleek, low profile of the ProMount is only 1 1/8 inches high
Fits nearly all Lowrance, Garmin, Eagle, Hummingbird, and Vexilar electronics
Made of tough ABS plastic
Stainless steel mounting screws
One year warranty
Made in the USA
Specifications:
Outside Dimensions: 3.45" x 4.75"
Mounting Hole Spacing: 2.3" x 3.7"
Mounting Hole Size: 1/4"
Supports weights up to 3 pounds
One year warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
16.80 |
|