|
Premier Wiper Arm - Stainless Steel - Single - 20"-25"
Combine the heavy-duty construction and materials of the Premier wiper arm line with a built-in wet-arm system that allows for a clean and easy installation of a washer system. A simple and easy way to keep your windshield clean, the Premier wet arms feature a black PVC hose that runs up the center of the arm and ends in a four-nozzle fixture that is an integral part of the wiper arm itself. Each solid brass nozzle is adjustable to provide a maximum coverage spray pattern for almost any windshield.
Features:
Compatible with 2.5 wiper motors
Wet single-wiper style
Physical Specifications:
Each in Package Height (in): 1"
Each in Package Width (in): 2.9"
Each in Package Length/Depth (in): 21.5"
Each in Package Weight (oz): 12.96"
|
85.43 |
|
|
Premier Wiper Arm - Stainless Steel - Single - 15-20"
Combine the heavy-duty construction and materials of the Premier wiper arm line with a built-in wet-arm system that allows for a clean and easy installation of a washer system. A simple and easy way to keep your windshield clean, the Premier wet arms feature a black PVC hose that runs up the center of the arm and ends in a four-nozzle fixture that is an integral part of the wiper arm itself. Each solid brass nozzle is adjustable to provide a maximum coverage spray pattern for almost any windshield.
Features:
Compatible with 2.5 and 1.5 MRV wiper motors
Wet single-wiper style
Physical Specifications:
Each in Package Height (in): 0.6"
Each in Package Width (in): 3.1"
Each in Package Length/Depth (in): 19.5"
Each in Package Weight (oz): 12.8"
|
69.31 |
|
|
Wiper Arm Deluxe Stainless Steel Single - 14"-20"
Deluxe arms are used on Standard and Heavy-Duty motors.
Features:
Stainless Steel
Arm has "articulating/bend-back" feature
Motor shaft mounting has additional set screw clamping
Compatible with 2.5, 1.5, 1000, MRV wiper motors
Dry single wiper style
|
33.54 |
|
|
Wiper Arm Deluxe Stainless Steel Single - 6.75"-10.5"
Deluxe arms are used on Standard and Heavy-Duty motors.
Features:
Stainless Steel
Arm has "articulating/bend-back" feature
Motor shaft mounting has additional set screw clamping
Compatible with 2.5, 1.5, 1000, MRV wiper motors
Dry single wiper style
|
28.57 |
|
|
Wiper Arm Deluxe Stainless Steel Single - 10"-14"
Deluxe arms are used on Standard and Heavy-Duty motors.
Features:
Stainless Steel
Arm has "articulating/bend-back" feature
Motor shaft mounting has additional set screw clamping
Compatible with 2.5, 1.5, 1000, MRV wiper motors
Dry single wiper style
|
29.76 |
|
|
Stainless Steel Single Block - 25mm Sheave Diameter for 25mm Stanchion Pivoting
A single block intended for use on a dinghy. The block is light, reliable, and has good performance.
Applications:
For stanchion applications - furling system line
Specifications:
Materials Composite sheave and 316L stainless steel grade cheeks
Rope size: (inch) 5/16"-25/64" / (mm) 8-10
Length: (inch) 3 47/64" / (mm) 95
Width: (inch) 2 3/32" / (mm) 53
Thickness: (inch) 53/64" / (mm) 21
Sheave Diameter: (inch) 63/64" / (mm) 25
Working load: (lb) 610 / (mm) 280
Breaking load: (lb) 880 / (mm) 400
Weight: (lb) 0.154 / (g) 70
Caption:
Working Load (WL): For nautical applications
Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5
*Sold as an Individual
|
41.22 |
|
|
Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75" Tall - 6-Pack
Unlike the SOB standoffs which have a blind thread, the SOT series standoffs
have a thread which runs all the way through the barrel of the standoff.
This allows the standoff to be mounted from either side of the base. These
parts are manufactured in 316 stainless steel making them suitable for deck
applications. This standoff is inertial (friction) welded to the base
yielding a very strong part. The bases are all 1.25" in diameter. Use for
through deck mounting of hardware or anywhere you need a fixed female
thread.
|
55.69 |
|
|
Stainless Steel Stud 1.25" Base 1/4 x 20 Threads 2.25" Tall - 10 Pieces
The stainless steel stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs in shear. All studs have 1/4 x 20 threads. Use for hanging panels, through deck mounts and many other uses.
|
50.21 |
|
|
Mini Stainless Steel Single Drop-In Horn with Stainless Steel Grill - 12V Low Pitch
Features:
All Stainless Steel Inside & Out
304 Stainless Steel inside and out including a sealed sound unit
No rust
Guaranteed for 5 years
All meet ABYC A-23 for boats up to 12 meters
Pre-wired
It fits existing hole patterns
Specifications:
Dimensions: 3"L, 3-1/4"W, 1-3/4"H (7.5 x 8 x 4.5 cm)
Max Amp Draw: 3 Amps.
Grill Dimensions: 4-7/8" x 2-3/8" with 4" hole centers
Rating: 106 dB @ 1 Meter Installed
|
39.43 |
|
|
Mini Stainless Steel Single Drop-In Horn with Stainless Steel Grill - 12V High Pitch
Features:
High pitched
304 Stainless steel inside and out
5-year Guarantee
Prewired
Mounting holes have 4" centers
Hardware not included
3"L x 3-1/4"W x 1-1/2"H (7.5 x 8 x 4.5cm)
|
39.43 |
|
|
Stainless Steel Stud 1.25" Base 1/4 x 20 Thread 0.75" Tall - 100 Pack
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
|
232.32 |
|
|
Stainless Steel Stud 1.25" Base #10 x 24 Thread 2.5" Tall
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
|
56.27 |
|
|
Stainless Steel Stud 1.25" Base 10 x 24 Threads .50" Tall - 15 Quantity
Studs with smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items that require a smaller stud diameter. These studs can be bonded from either surface of the base plate.
|
24.83 |
|
|
Stainless Steel Stud 1.25" Base 10 x 24 Threads 1.00" Tall - 15 Quantity
Studs with smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items that require a smaller stud diameter. These studs can be bonded from either surface of the base plate.
|
28.66 |
|
|
XKA Stainless Steel Trim Tab Kit with MLC-1 Control - 12 x 18
The Lectrotab stainless steel trim tab design provides unmatched strength and reliability. All stainless steel tabs are fabricated with a continuous rolled and pinned hinge. This design eliminates the need for welding.
Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat.
Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates either a standard or low profile transom mounting bracket.
The Lectrotab MLC-1 is a microprocessor based trim tab control that can move both tabs simultaneously at the touch of a single button. It includes LED tab position indicators which will automatically dim in darkness and brighten in sunlight.
Features:
Continuous rolled and pinned hinge provides added strength and eliminates the need for welding
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
Actuators are fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Trim Tab Size (L x W) - 12" x 18" (30 x 46 cm)
Boat Length - 20' to 40' (6 to 12 M)
Trim Tab Material - 12 gauge, 304 Stainless Steel
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
Control Mounting Hole Cutout - 2" (50 mm)
Control Operating Voltage - 12 or 24 V
In the Box:
One (1) Manual Leveling Control
Two (2) Stainless Steel tabs
Two (2) actuators w/23' (7 M) cables
Instruction Manual
*Sold as a Kit
|
1290.38 |
|