Mini Cap - Used to Cover Female Connector Mini cap used to cover female connectors

Micro Cap - Used to Cover Female Connector Micro cap used to cover female connectors.

Micro Cap - Used to Cover Male Connector Micro cap used to cover male connectors.

Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge. Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly Screw connector for positive connnection Termination resistors are used to terminate both ends of the trunk line

Maretron Mini Bulk Cable - 100 Meter - Gray Specifications Overall Outer Jacket Mat/Color:PVC/Blue - NB1, PVC/Gray - NG1 Insulation Material: PE (data), PVC (power) Construction: 2x15 (1.45mm) AWG, 2x18 (1.02mm) AWG, 18 (1.02mm) AWG Drain Wire Shielding (3 Levels): Foil (overall), Foil (power pair), Foil (data pair) Power Pair Wire: 2x15 (1.45mm) AWG Resistance/Conductor: 3.44 Ohms/1000 ft max Max Amperage: 16 Amps - NB1, 14 Amps - NG1 Color Code: Red/Black Data Pair Wire: 2x18 (1.02mm) AWG Characteristic Impedance: 120 Ohms +/- 10% Capacitance: 12 pF/1000 ft Max Color Code: White/Blue Approvals UL: PLTC 75 deg C Sunlight Resistant E90625, AWM 80 deg C 300V CSA: CMX-OUTDOOR-CMG LL54185 75 deg C, AWM I/II A/B 80 deg C 300V FT4 NMEA: NMEA 2000 APPROVED IEC: IEC-61162-3

Maretron Mini Bulk Cable - 100 Meter - BlueSpecifications Overall Outer Jacket Mat/Color:PVC/Blue - NB1, PVC/Gray - NG1 Insulation Material: PE (data), PVC (power) Construction: 2x15 (1.45mm) AWG, 2x18 (1.02mm) AWG, 18 (1.02mm) AWG Drain Wire Shielding (3 Levels): Foil (overall), Foil (power pair), Foil (data pair) Power Pair Wire: 2x15 (1.45mm) AWG Resistance/Conductor: 3.44 Ohms/1000 ft max Max Amperage: 16 Amps - NB1, 14 Amps - NG1 Color Code: Red/Black Data Pair Wire: 2x18 (1.02mm) AWG Characteristic Impedance: 120 Ohms +/- 10% Capacitance: 12 pF/1000 ft Max Color Code: White/Blue Approvals UL: PLTC 75 deg C Sunlight Resistant E90625, AWM 80 deg C 300V CSA: CMX-OUTDOOR-CMG LL54185 75 deg C, AWM I/II A/B 80 deg C 300V FT4 NMEA: NMEA 2000 APPROVED IEC: IEC-61162-3

Mini/Micro Tee A Tee is used to tap into the trunk line for adding a drop connection. A Mini/Micro Tee has Mini connectors for the trunk lines and a Micro connector for the drop line. Gold contacts for greatest reliability Keyed connectors for error-free connections Mini Male (left) Micro Female (bottom) Micro Female (right)

Mini Tee A Tee is used to tap into the trunk line for adding a drop connection. Gold contacts for greatest reliability Keyed connectors for error-free connections Male (left) Female (Bottom) Female (right)

NMEA 2000 Power Tee - 8M - 2x Female Connector  Furuno's NMEA2000 Power Tee with 8 Meter, 2x Female connector. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Mini 90° Male to Female Connector The Mini Elbow is used in spots where it is impossible to bend a cordset around tight corners. The elbow easily connects to a tee or double-ended cordsets making 90 degree turns practical at the end or anywhere along the line. Mounting hole for secure fastening of cable system Waterproof seals for reliable connections Nickel plated brass ideally suited for harsh marine environment

Pressure Transducer - 0 to 5000 PSI This pressure transducer is designed to connect to the NMEA 2000® network via a Maretron FPM100 Fluid Pressure Module. Specifications: Range: 0 to 5000 PSI (344.74 bar) Accuracy: +/- 0.5% Full Scale Type: Absolute (no vent tube) Installation: All Maretron pressure transducer assemblies are equipped with a 1/4 in. NPT male threaded fitting. Install the pressure transducer to a 1/4 in. NPT female fitting on the system or tank is to be monitored with a maximum torque of 150 in-lbs (16.95 Nm). If you are monitoring a system where pressure spikes or transients will occur, or where the pressure will exceed the maximum pressure rating of the pressure transducer, install a Pressure Snubber (PT-SNUB-01) onto the system being monitored first, then install the pressure transducer to the female port on the pressure snubber.

Pressure Transducer 0 to 50 PSI All Maretron pressure transducer assemblies are equipped with a 1/4” NPT male threaded fitting. Install the pressure transducer to a ¼” NPT female fitting on the system or tank to be monitored with a maximum torque of 150 in-lbs (16.95 Nm). If you are monitoring a system where pressure spikes or transients will occur, or where the pressure will exceed the maximum pressure rating of the pressure transducer, install a Pressure Snubber (PT-SNUB-01) onto the system being monitored first, then install the pressure transducer to the female port on the pressure snubber. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge. Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly Screw connector for positive connnection Termination resistors are used to terminate both ends of the trunk line

Maretron NM-CF Mini Male to Micro Female Reducer The reducer is used to change from a Mini cable to Micro or Mid cable. For example, one end of the network might be terminated at the top of the mast but it may not be desireable to run a Mini trunk cable up the mast. In this case, you can switch over to Micro or Mid cable at the base of the mast using the reducer and continue up the mast with Micro or Mid cable. Corrosion resistant Nickel plated Brass Weatherproof to IP67 Reduces Mini Backbone to Micro/Mid Cable