Pow'r Grip LeveLock Double Locking Fish Rod Holder Mount  Just when you thought it couldn't get any better.....this mount adjusts and locks in place at both ends.   We've joined the "LeveLock" Adjustable Fish Rod Holder Mount, with the "Pow'rGrip" Adjustable Fish Rod Holder Mount.  This allows the "Pow'rGrip" portion of the mount to adjust to any size rod holder and lock in place, while the "LeveLock" portion of the mount, adjusts and locks your Magma rectangular grill.  This mount is the strongest, most corrosion resistant, most versatile mount in the industry. Compatible With: Rectangular Grills and Single Mount Tables Technical Specifications: Material - 18-8 Stainless Steel and 356 Anodized Aluminum  Dimensions W x H) - 3-5/8" x 8" (9.3 x 20.3 cm) Weight - 1.77 lb (.81 kg) *Sold as an Individual 

LeveLock All-Angle Fish Rod Holder Mount The LeveLock fish rod holder mount is Magma's most popular mount and is constructed of marine grade Stainless Steel tubing and anodized Aluminum components.  These components have been hard anodized to aircraft quality for extremely high corrosion resistance.  With an increased adjustment range and sturdy draw tight handle design this heavy duty mount is the strongest, most corrosion resistant and most versatile mount available on the market. Compatible With:  Rectangular Grills and Single Mount Tables *Sold as an Individual 

Adjustable All-Angle Fish Rod Holder Mounted Kayak/SUP Rack No more tripping over your kayak or paddleboard when stored on the deck or lugging them around after a long day on the water.   With Magma’s Fish Rod Holder Mounted Removable Kayak / SUP Rack your problems are solved.  This convenient storage rack, easily attaches to most standard fish rod holders, has been constructed from 1” Dia., 304 marine grade Stainless Steel tubing, aircraft quality hard anodized 356 aluminum, and includes stainless steel attachment fasteners.  Designed to fit most standard fish rod holders up to 1-1/2” (38mm) inside diameter and is wide enough to fit all of the most popular kayak or board sizes.  Magma’s patented LeveLock® all-angle adjustable mounting bracket and the Pow’rGrip adjustable quick release rod holder system allows each arm to be instantly installed and adjusted without tools.  Each arm comes with pre-installed UV resistant padding and has two tie-down attachment points for securing straps when underway or simply use them with a cable lock to safely store your toys when at the dock.   Whether you’re new to water sports or a seasoned veteran, this rack is a must have for the paddling enthusiast who’s always on the go. Features: Holds a single kayak or 2 or more standard SUP’s Allows quick installation or removal without tools for convenient storage Technical Specifications: Material - 304 Marine grade Stainless Steel Bracket Height (w/o mount) - 26.84" (68.18 cm) Weight (Pair) - 12.4 lbs (5.63 kg) *Sold as a Pair

Bait/Filet Mate Table w/LeveLock® Mount - 31" Magma’s original Bait/Fillet Mate tables include an engraved logo and ruler that shows the black core for a clean look while increasing visibility when measuring the days catch.  Not just designed for bait preparation or fish cleaning, these tables are FDA approved for food preparation or service.  Constructed with commercial quality UV stabilized compression molded high-density polyethylene that is virtually indestructible, practical, and more sanitary than wood fillet tables.  These tables will not crack, peel, mildew, absorb bacteria or fish odors, allowing you virtually maintenance free use.  Equipped with (2) knife holsters, receptacle for pliers, rounded edges/corners for safety, and side channels with a slotted table back that permits drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting.   These tables are supplied with the LeveLock® all-angle fish rod holder mount, which is our most popular mount and has been manufactured using heat-treated Stainless Steel and hard-anodized aluminum for superior corrosion resistance.  It’s quick release cam-action design allows convenient all-angle adjustment when in use or simply folds flat for storage.  The 1-1/2” (38 mm) 304 Stainless Steel tube has 8 different rotation positions and fits most cross-pin type rod holders.   Features: Slotted back allows for drainage from work surface All edges and corners rounded for safety FDA approved for food service UV stabilized Will not crack, peel, mildew, or retain fish odors LeveLock® quick release all angle rod holder mount Technical Specifications: Material - 100% High Density Color Core Polyethylene Table Dimensions (L x W x H) - 31" x 12-1/3" x 3-7/8" (78.74 x 31.24 x 9.65 cm) Weight -  Mount - LeveLock® all-angle fish rod holder mount  In the box: 31" Bait/Filet Mate Table   LeveLock® Mount Mounting hardware Instruction manual *Sold as an Individual

Rectangle Party Table with LeveLock Mount Magma's party table provides additional serving space while securing bottles when entertaining on board.  Perfect for any sunset cruise or day at the sandbar.  Holds a variety of bottle sizes.  Includes the LeveLock all-angle fish rod holder mount, with its quick-release cam-action design allows convenient all-angle adjustment when in use or simply folds flat for storage.  Features: FDA Approved and safe to use for food preparation Long-lasting and resists damage to the sun Will not crack, peel or absorb mildew or bacteria  Technical Specifications: Material - Compression molded high-density polyethylene Mount Application - Single mount Dimensions (L x W x H) - 18.75" x 12.25" x 3.95" (47.6 x 31.1 x 10 cm) Weight - 13.1 lbs (5.94 kg) In the Box: Table LeveLock mount Instruction manual  *Sold as an Individual 

Marine Kettle® Pow'r GripFish Rod Holder Mount Made of 18-8 stainless steel and cast 356 hard anodized aluminum to endure the most severe marine environment.  This versatile mount fits most cylindrical type rod holders and allows grills to mount in any direction from the rod holder.  Its unique quick disconnect system allows instant installation or storage after use without tools.  Compatible With: Marine Kettle® Grills *Sold as an Individual 

Elliptical Party Table with LeveLock Mount Magma's party table provides additional serving space while securing bottles when entertaining on board. Perfect for any sunset cruise or day at the sandbar.  Includes the LeveLock all-angle fish rod holder mount, with its quick-release cam-action design allows convenient all-angle adjustment when in use or simply folds flat for storage.  Features: FDA Approved and safe to use for food preparation Long-lasting and resists damage to the sun Will not crack, peel or absorb mildew or bacteria  Technical Specifications: Material - Compression molded high-density polyethylene Mount Application - Single mount Dimensions (L x W x H) - 28" x 14.75" x 3.5" (71.1 x 37.5 x 8.9 cm) Weight - 16 lbs (7.26 kg) In the Box: Table LeveLock mount Instruction manual *Sold as an Individual 

Adjustable Grill Rod Holder Mount The Kuuma Pivoting Rod Holder Mount fits securely into any 1-5/8" I.D., flush mount fishing rod holder and instantly converts it to a fully adjustable grill mount.  The stainless inner tube telescopes out of the anodized aluminum outer tube making the overall height adjustable from 14.8" to 18.8".  The mounting plate is compatible with all Kuuma grills, as well as most rectangle-style Magma grills (Magma and Kuuma grill mounting hardware included).  The mounting plate swivels around a ball joint, making it freely adjustable to whichever angle best suits your grilling needs.  Both the telescoping tube and swiveling mounting plate feature a tension clamp, keeping the Rod Holder Mount securely locked in the position you choose.  Compatible With: All Kuuma grills Features: Fits into 1-5/8" I.D. fishing rod holders of all angles to create a level grill mount Mounting plate pivots and rotates 360-degrees around ball joint  Stainless Steel inner tube telescopes out 4-inches Tension clamps securely locks the pivoting and telescoping joint Rugged reinforced nylon, anodized aluminum and Stainless Steel construction *Sold as an Indivudual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ShadeFin™ Telescopic Rod Holder Mount Wherever you are onboard, ShadeFin can follow! The Telescopic Rod Holder Accessory for ShadeFin – a versatile attachment option that inserts into standard gunnel rod holders for portable, adjustable boat shade. Made from high-quality, lightweight anodized aluminum, the Telescopic Rod Holder Accessory extends from 42" to 67" tall – elevating ShadeFin over the deck for boaters to comfortably stand underneath. For boaters at the dock, sandbar, or in the water, the Telescopic Rod Holder Accessory can also be adjusted to position ShadeFin over the side of the boat – keeping you protected from the sun. Easily Adjustable As the sun changes position, the angle and height of this accessory can easily be adjusted at two points along its body – the bottom joint and the throw latch. Toward the base, the bottom joint features a Sure-Grip Knob and Pull Pin Lock that enables the adjustment of the accessory's upward angle. The throw latch half-way up the body is used to adjust the height and 360° rotation of the ShadeFin. If using this accessory with the Adjustable Rod Holder Mount, the angle of ShadeFin can also be adjusted from the Sure-Grip Knob at the top.  Operation To use the Telescopic Rod Holder Accessory, simply insert the solid gimbal butt into any standard rod holder on the gunnel, remove the Pull-Pin, adjust the upward angle using the Sure-Grip Knob at the bottom joint to the desired 0°, 15°, or 30°, and reinstall the Pull Pin. Then, at the top, simply insert the Fixed or Adjustable Rod Holder Mount into the opening. The mount will secure in place when its gimbal butt seats into the Accessory gimbal pin. Then attach ShadeFin into the Mount, as directed in the Instruction Manual, and deploy. Use the throw latch to adjust the ShadeFin height and horizontal rotation. Features: Features Sure-Grip Knob at the joint with a secure Pull Pin Lock Features a throw latch for secure height adjustment from 42" to 67" Features solid aluminum gimbal butt and internal Delrin bearings High-quality drawn aluminum tube Pairs with T10-3000-5 or T10-3000-6 at the top sold separately 1-year limited warranty

RAM Tube Jr. Fishing Rod Holder, Standard 6" Length Post Spline & Combination Bulkhead/Flat Surface Base with Plunger Before you catch a Fish, you need to catch a RAM! Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use. Base Description: The combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder. Post Spline Length: 6" Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM Tube Jr. Fishing Rod Holder, Standard 4" Length Post Spline & Combination Bulkhead/Flat Surface Base with Plunger Before you catch a Fish, you need to catch a RAM! Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use. Base Description: The combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder. Post Spline Length: 4" Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

ShadeFin with White Fabric, Case & Fixed Rod Holder Mount Kit Add an extra layer of sun protection with ShadeFin by TACO Marine that easily attaches into rod holders, tops and arches for convenient, portable shade for almost any boat. ShadeFin’s ocean-inspired design provides expanded shade coverage for multiple areas of the boat, including fore, aft and sides of tops or anywhere there is a rod holder. ShadeFin’s fabric provides an excellent UPF 50+ rating of sun protection while boating and fishing, or when relaxing at the dock and sand bar. To anticipate the needs of many boaters, ShadeFin is available with either a fixed or adjustable rod holder mount, which inserts into any standard rod holder, or with a clamp-on mount for pipe or tube.  ShadeFin’s body houses the ribs and material, and is offered in all black or white. A protective mesh storage sleeve comes standard with the ShadeFin. To operate ShadeFin, remove the sleeve, mount to a desired location onboard and activate the underside release tabs. Structural ribs attached to weather-resistant sun-protecting fabric expand out from the body to lock the fin in place. ShadeFin is lightweight, portable and requires no drilling. Features: Light, compact and portable Easily mounts into any standard rod holder Kit comes with a Fixed Rod Holder Mount Adjustable Rod Holder Mount options available Clamp-on mounting options available for 3/4”, 1” schedule-40 Pipe and 1-1/4” O.D. tube Large coverage area of 5’ X 6’ UPF (Ultraviolet Protection Factor) rating of 50+ (“Excellent” rating) Made of high-quality anodized aluminum parts

ShadeFin with Black Fabric, Case & Fixed Rod Holder Mount Kit Add an extra layer of sun protection with ShadeFin by TACO Marine that easily attaches into rod holders, tops and arches for convenient, portable shade for almost any boat. ShadeFin’s ocean-inspired design provides expanded shade coverage for multiple areas of the boat, including fore, aft and sides of tops or anywhere there is a rod holder. ShadeFin’s fabric provides an excellent UPF 50+ rating of sun protection while boating and fishing, or when relaxing at the dock and sand bar. To anticipate the needs of many boaters, ShadeFin is available with either a fixed or adjustable rod holder mount, which inserts into any standard rod holder, or with a clamp-on mount for pipe or tube.  ShadeFin’s body houses the ribs and material, and is offered in all black or white. A protective mesh storage sleeve comes standard with the ShadeFin. To operate ShadeFin, remove the sleeve, mount to a desired location onboard and activate the underside release tabs. Structural ribs attached to weather-resistant sun-protecting fabric expand out from the body to lock the fin in place. ShadeFin is lightweight, portable and requires no drilling. Features: Light, compact and portable Easily mounts into any standard rod holder Kit comes with a Fixed Rod Holder Mount Adjustable Rod Holder Mount options available Clamp-on mounting options available for 3/4”, 1” schedule-40 Pipe and 1-1/4” O.D. tube Large coverage area of 5’ X 6’ UPF (Ultraviolet Protection Factor) rating of 50+ (“Excellent” rating) Made of high-quality anodized aluminum parts

RAM Tube Jr. Fishing Rod Holder with Standard 6" Length Post Spline & Flush Mounting Base Before you catch a Fish, you need to catch a RAM! Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use. Base Description: The flush mounting base contains 4 pre-drilled holes and a socket compatible with RAM-ROD and RAM-TUBE holders with a spline post. Post Spline Length: 6" Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

ShadeFin Fixed Rod Holder Mount Enjoy your ShadeFin in any standard rod holder with our Fixed Rod Holder Mount. Simply install by inserting the Fixed Rod Holder Mount into a firmly welded rod holder. Sliding the gimbal-slot butt end over the rod holder’s gimbal pin with the open end out makes a secure, quick connection. A beveled, nylon sleeve is included, in the instance the rod holder opening is oversized for the mount’s shaft. Verify that the gimbal slot on the mount is mated with the pin in the rod holder or Telescopic Rod Holder Mount, attach the ShadeFin and enjoy! Features: Manufactured from high-polished Type-304 stainless steel Gimbal-slot butt end for secure rod holder placement Features white nylon sleeve for additional rod holder stabilization Includes self-aligning notch and pin-locking hole 1-year limited warranty