|
The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC6 and HRC8 are packed with original and proven features including rode management technology developed by Maxwell.
HRC6
Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up
Guaranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design
Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag-free operation
High efficiency spur gearbox incorporating a robust non-backwind mechanism
High speed, jam-free retrieval of rope and chain controlled from a remote panel mounted Up/Down switch
Emergency "free fall" function in the event of onboard power failure
Revolutionary new chainwheel - see over
Heavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation, is easily removed for simple routine electric brush maintenance
Now incorporating Maxwell's automatic free-fall technology. Simply activate the windlass 'free fall' lever, operate your down control (helm station or footswitch) and the windlass will freefall your anchor. Ready to lift the anchor? Activate the up control and the 'free fall' device automatically disengages allowing you to power up your anchor
Aesthetically pleasing above deck design, encapsulating the motor and drive in a watertight case, saving space below deck and allowing simple routine maintenance
Die cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection
Specifications:
Model: HRC6
Maximum Pull: 900lbs
Chain Short Link: 1/4"
Rope Size (Nylon): 1/2"
Line Speed(Anchor Retrieval): 108'/min
Power Supply(DC): 12V or 24V
Motor Power: 600W
Net Weight: 25lbs
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1038.07 |
|
|
The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC6 and HRC8 are packed with original and proven features including rode management technology developed by Maxwell.
HRC8
Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up
Guaranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design
Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag-free operation
High efficiency spur gearbox incorporating a robust non-backwind mechanism
High speed, jam-free retrieval of rope and chain controlled from a remote panel mounted Up/Down switch
Emergency "free fall" function in the event of onboard power failure
Revolutionary new chainwheel - see over
Heavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation, is easily removed for simple routine electric brush maintenance
Now incorporating Maxwell's automatic free-fall technology. Simply activate the windlass 'free fall' lever, operate your down control (helm station or footswitch) and the windlass will freefall your anchor. Ready to lift the anchor? Activate the up control and the 'free fall' device automatically disengages allowing you to power up your anchor
Aesthetically pleasing above deck design, encapsulating the motor and drive in a watertight case, saving space below deck and allowing simple routine maintenance
Die cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection
Kits include:windlass, on/off breaker panel, reversing soleniod, up/down panel switch, a clutch release handle
Specifications:
Model: HRC8
Maximum Pull: 900lbs
Chain Short Link: 5/16"
Rope Size (Nylon): 9/16"
Line Speed(Anchor Retrieval): 108'/min
Power Supply(DC): 12V
Motor Power: 600W
Net Weight: 25lbs
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1006.12 |
|
|
Stainless Steel Anchor Swivel for Chain Size 1/4"-5/16"
316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear on the bow roller and windlass. These precision, high quality swivels feature double locking pins for extra security. Can be used between anchor and chain or between chain and line.
Specifications:
Chain Size: 1/4" to 5/16"
Strength: 5500lbs
Material: Stainless Steel
Length: 3-9/16"
Width: 5/8"
|
52.51 |
|
|
March 893-10-1/4" 24V Pump W/ 1286-0002-0100
|
351.00 |
|
|
BURKS GNA6-1 1/4-5.00, CENTRIFGUAL PUMP ONLY BRONZE-FIT
Bronze Fitted Cast Iron Construction.
Base mounted Pump Only less Motor.
Ports are Inches NPT Inlet, Inches NPT Outlet.
UNSPSC Code: 40150000
|
1987.20 |
|
|
BURKS T310GA5-1 1/4, CENTRIFUGAL PUMP 3PH 1HP TEFC
Close Coupled, 60 Hz, Three Phase, 3500 RPM, 1 Horsepower, TEFC Motor Enclosure, Frame Size 56J.
UNSPSC Code: 40150000
|
1832.40 |
|
|
Bosworth 75-1 1/4 Foot/Check Vlv 1 1/4 Female
Bosworth- Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 1 1/4” Female Threaded Ports
|
20.36 |
|
|
Burks T37G5-1 1/4-SS-3.25, Centrifugal Pump
80gpm, 1-1/4" Outlet 3/4HP 3PH
|
5122.39 |
|
|
Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame
|
1794.96 |
|
|
BURKS 330GA6-1 1/4, Centrifugal Pump 230/460v 3PH 3HP
Bronze Fitted Cast Iron Construction. Close Coupled to a 3 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 5.5 Inches.
|
2183.40 |
|
|
BURKS 37GA5-1 1/4, Centrifugal Pump 230/460v 3PH 3/4HP
Centrifugal Pump and Motor unit.
Bronze Fitted Cast Iron Construction.
Close Coupled to a 3/4 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.
Impeller Diameter is 3.81 Inches.
UNSPSC Code: 40150000
|
1460.70 |
|
|
BURKS 310G5-1 1/4, BURKS CIRCULATION G5 PUMP 230-440V 1HP 3PH
Centrifugal Pump and Motor unit. Bronze Fitted Cast Iron Construction. Close Coupled to a 1 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.25 Inches.
|
1605.60 |
|
|
BURKS 37G5-1 1/4, Centrifugal Pump 230/460v 3PH 3/4HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 3/4 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.
Impeller Diameter is 4 Inches.
UNSPSC Code: 40150000
|
1591.20 |
|
|
BURKS 7G5-1 1/4, CENTRIFUGAL PUMP 1PH 3/4HP 115/230V
Bronze Fitted Cast Iron Construction.
Close Coupled to a 3/4 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4 Inches.
|
1432.80 |
|
|
Wrap Pins Hook & Loop Pin Locking Devices for Open Body Turnbuckles 1/4" - 2-Pack
Wrap Pins are neat hook and loop locking devices used to secure turnbuckles without messing with unruly cotter pins. Just make your adjustment, push the pin attached to the hook and loop through the hole and wrap the hook and loop strip around the turnbuckle body. Works on open body turnbuckles and Johnson's positive locking, slotted tubular turnbuckles. This size works for 1/16" diameter for 1/4" threads.
|
13.86 |
|