SmartFind S5A AIS SART Search & Rescue Transponder (SART) for Liferafts The SmartFind S5A AIS SART is a manual deployment survival craft AIS Search and Rescue Transmitter (AIS SART), intended for use on life rafts or survival craft. It meets IMO SOLAS requirements and is a replacement for legacy radar SARTs. Compact and easy to both operate and deploy, the SmartFind S5A AIS SART is a transponder packed inside a quick release carry off bag, that allows a survival crafts location to be identified by rescue authorities and nearby AIS equipped vessels. The SmartFind S5A transmits survivor information, including structured alert messages, GPS position information and serialised identity number. Once activated the SmartFind S5A AIS SART transmits continually for a minimum of 96 hours and inbuilt high precision GNSS receiver provides accurate position information to assist in the detection of the survival crafts’ location. Whether wall mounted in the ships bridge or packed inside a survival craft, the highly visible and buoyant carry case affords maximum protection. Features: Internationally approved Ship or Survival craft options Waterproof to 10m Buoyant/floats Rugged, compact and lightweight Minimum 96 hour operational battery life 6 year battery life Visual indication of operation Built-in test facility Mounting options — Internal/External Transmits GPS coordinates Interoperability with AIS Users Telescopic Mounting Pole included Comes with protective carry off bag

**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form. ** Click here to download form. SmartFind M10 Class B Transponder The McMurdo SmartFind M10 AIS Class B Transponder, part of McMurdo's new range of innovative AIS products, is perfect for smaller non SOLAS vessels, where the complexity of a Class A Transponder is not necessary. It transmits vessel position information as well as receiving all AIS targets within 20 miles of the boat, typical. Using the built-in GPS receiver, the SmartFind M10 determines position, speed and course, and once this is combined with other navigational information, it is automatically transmitted without any user interaction. When received by other vessels and coast stations, the data built up to provide a live graphical display of traffic in the area. Engineered for flawless integration with navigation systems, the SmartFind M10 supports NMEA2000 and NMEA0183 output, meets IEC 62287 and related standards Benefiting from an SD card slot, the SmartFind M10, can be quickly and easily used as a data recorder, enabling the capture of all messages - to assist in system and safety monitoring, including incident investigation. Recorded data is logged and stored. The `Silent' option, allows the user to temporarily stop the broadcast of identifying information on occasions where either privacy or security is required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SmartFind M15S AIS Class B Receiver/Splitter McMurdo's SmartFind M15S is a low cost receiver that puts AIS technology within the reach of even those on a limited budget. It receives all Class A, Class B, AIS SART, AIS MOB and AIS Base Station transmissions, plotting their positions directly on your chartplotter or PC/Mac using the PC AIS Viewer software supplied. At only 128 mm x 88 mm x 36 mm it is compact and easy to install and set up, supporting integration with existing navigation systems via its NMEA0183 or USB interfaces. McMurdo's SmartFind M15S has the added innovation of a built in VHF Splitter, providing shared antenna capability with a user's VHF Radio, making the M15S more cost effective and simpler to install (as no additional aerial is needed). The M15S can be externally or USB powered. Features: Compact, low cost black box solution Dual channel AIS receiver Displays all AIS message types USB "Plug & Play" connectivity 12/24V DC or USB powered (M15S model only) Externally or USB powered NMEA0183 interface Includes AIS Viewer display and configuration software Optional antenna splitter and WiFi

SmartFind M15 AIS Class B Receiver The SMARTFIND M15 is a low cost receiver that puts AIS technology within the reach of even those on a limited budget. It receives all Class A, Class B, AIS SART, AIS MOB and AIS Base Station transmissions, plotting their positions directly on your chartplotter or PC/Mac using the PC AIS Viewer software supplied. At only 128 x 88 x 36 mm it is compact and easy to install and set up, supporting integration with existing navigation systems via its NMEA0183 or USB interfaces. Features: Compact, low cost black box solution Dual channel AIS receiver Displays all AIS message types USB "Plug & Play" connectivity NMEA0183 interface Includes AIS Viewer display and configuration software Optional antenna splitter and WiFi This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form. ** Click here to download form. SmartFind M10W Class B Transponder The McMurdo SmartFind M10W AIS Class B Transponder, part of McMurdo's range of innovative AIS products, is perfect for smaller non SOLAS vessels, where the complexity of a Class A Transponder is not necessary. The SmartFind M10W transmits vessel position information as well as receiving all AIS targets within 20 miles of the boat. Using the built-in GPS receiver, the SmartFind M10 determines position, speed and course, and once this is combined with other navigational information, it is automatically transmitted without any user interaction. When received by other vessels and coast stations, the data built up to provide a live graphical display of traffic in the area. McMurdo's SmartFind M10W AIS Class B Transponder with WiFi features Wireless connectivity to a user's smart device (tablet, phone, laptop) allowing operational flexibility. Engineered for flawless integration with navigation systems, the SmartFind M10 supports NMEA2000 and NMEA0183 output, meets IEC 62287 and related standards, and features an optional WiFi interface as well as USB connectivity. Benefiting from an SD card slot, the SmartFind M10W, can be quickly and easily used as a data recorder, enabling the capture of all messages - to assist in system and safety monitoring, including incident investigation. Recorded data is logged and stored. The 'Silent' option, allows the user to temporarily stop the broadcast of identifying information on occasions where either privacy or security is required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

G8 SmartFind Manual - Category 2 - GNSS & AIS The McMurdo SmartFind G8 AIS is the world’s first EPIRB to include 406MHz, 121.5MHz, AIS and GNSS (better known as GPS) to accelerate search and rescue. The unique power of this beacon is in the flexibility and additional tracking capabilities long demanded by maritime customers. This will further reduce rescue times by combining the global location power of 406MHz with the localized rescue capacities of AIS. Features: MEOSAR Compatible for faster Alert detection Combined Global Alerting 406 MHz with localized recovery power of AIS Four search and rescue frequencies (406MHz, 121.5MHz, AIS and GNSS) Multiple GSS (GPS) receivers for faster more accurate location detection Easy service battery 10-year battery life Compliance with the new United States emergency hands free transport mandate False activation protection Ruggedized base This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

G8 SmartFind Auto - Category 1 - GNSS & AIS The McMurdo SmartFind G8 AIS is the world’s first EPIRB to include 406MHz, 121.5MHz, AIS and GNSS (better known as GPS) to accelerate search and rescue. The unique power of this beacon is in the flexibility and additional tracking capabilities long demanded by maritime customers. This will further reduce rescue times by combining the global location power of 406MHz with the localized rescue capacities of AIS. Features: MEOSAR Compatible for faster Alert detection Combined Global Alerting 406 MHz with localized recovery power of AIS Four search and rescue frequencies (406MHz, 121.5MHz, AIS and GNSS) Multiple GSS (GPS) receivers for faster more accurate location detection Easy service battery 10-year battery life Compliance with the new United States emergency hands free transport mandate False activation protection Ruggedized base This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  SmartFind M5 - The Complete AIS Solution   Provides automated AIS communication from ship-to-ship and ship-to-shore, transmitting and receiving vessel, voyange & safety related information.   The SmartFind M5 AIS Class A Transponder is low in cost, reduced in size and is easy to install making it ideal to meet the budgets and demands of owners and vessel operators. Key Features: -Compact Design-3.5" color LCD display -Embedded coastline map-Detailed target list and Radar overview -Features AIS MOB SART alarm to aid MOB recovery -GPS antenna -Cable junction box, Pilot plug-Mounting kit and flush mount -PC AIS Viewer software          Specials     Rebates    Close Outs     Remanufactured

  McMurdo FREE MOB Promotion Super Savings during National Safe Boating Week, May 21-27, 2016 Receive a FREE McMurdo MOB when you purchase a SmartFind EPIRB. Trust the power of the SmartFind G5 EPIRB's global distress capability, combined with the localized tracking and recover of a SmartFind S20 AIS MOB device. Don't miss out during National Safe Boating Week, May 21 - 27, 2016!        Specials     Rebates    Close Outs     Remanufactured

Class A AIS Bundle with Free CX4A AIS Antenna CLA2000 Deep Sea Class A AIS Transponder Digital Yacht’s CLA2000 is the ultimate SOLAS and inland waterway globally approved Class A AIS transponder. Water and weather proof to IP67, it has a full integrated 5” hi-res colour display supporting a wide range of functionality including electronic chart navigation with optional C-Map MAX charting and AIS target management. Proven, superior real world AIS message receive and transmit and message processing performance is delivered by advanced core SDR AIS technology. This state of the art technology ensures you see more targets, more of the time and at maximum range. The CLA2000 will find applications on SOLAS mandated vessels over 300GRT as well as workboats, rescue services, inland waterways users, RIBs, large yachts and any user wanting premium AIS performance and safety. The CLA2000 has optimised software for detecting AIS SART and MOB devices with a dedicated icon for this class of AIS. An automatic alarm is activated on detection of an AIS SART beacon activation. The target plot display will also calculate relative bearing of the device for easy visualisation of the target and rescue. The CLA2000 is fitted with a micro SD card reader located behind a waterproof cover on the front panel. This can support software updates, data logging of AIS and position data to a blank card as well as compatibility with C- Map MAX charting cards for optional detailed back ground charting. The CLA2000 has an integrated wireless interface for sending AIS and position data to smart phones, tablets, PCs and MACs for use with 3rd party charting and navigation apps. It supports client mode where it can connect to an existing wireless network or AP mode where devices can connect directly to the CLA2000. Up to 5 simultaneous/connected devices are possible. Features: Globally approved Class A AIS transponder High resolution, 800 x 480 pixel 5” colour display (MKD) with easy to use, fast user interface Bracket or flush mount – waterproof to IPX7 Integrated GPS with external antenna or utilise external NMEA feed (user selectable) 3 x NMEA 0183 interface (bi-directional for plotter, ECDIS, radar etc) 3 x sensor input ports (eg BlueBoard, external GNSS, gyro etc) NMEA 2000 interface Built in SD card slot for software updates, AIS data port logging or C-Map MAX mapping capability with optional C-Map data card Built in wi-fi for connection to iPads and tablets for wireless navigation Sophisticated AIS SART MOB alarm and display capability User programmable alarms for CPA and TCPA Advanced filtering of targets External alarm and remote silence switch capability CX4A Commercial AIS/VHF Antenna Powerful AIS Tuned commercial VHF Antenna that will give you maximum AIS range. Has a SO239 antenna connector in the base of the Antenna and we recommend using this with low loss 50 ohm coax cable such as RG-213 for best performance (not supplied), particularly on long cable runs. A very high quality 3dB AIS tuned GRP antenna which is ideal for professional and super yacht installation. Specifications: 3dB AIS tuned GRP antenna 4ft long Fit 1.25″ commercial grade fixing bases

AIS Plotter/Radar - Requires GPS Input & VHF Antenna The Nasa Marine AIS SART Plotter is the first stand alone AIS receiver / plotter specifically designed for the leisure boat market. The unit consists of a dual frequency AIS receiver, demodulator, signal processor and a backlit matrix display. It receives an NMEA input (RMC) from the boats GPS which puts the user at the centre of a radar style screen. A COG pointer is selectable by the user. All AIS carrying vessels and SART transponders are displayed with bearing and range relative to the user. Any vessel on the screen can be selected by the user. The selected vessel is highlighted and its data displayed on the right of the screen. This data includes the vessel’s MMSI number, name, course over ground, speed over ground, range, latitude and longitude. The display, with ranges of 0.125, 0.25, 0.5, 1, 2, 4, 8, 16 and 32 nautical miles shows AIS carrying vessels and SART transponders in a format normally associated with conventional radar. A trail of previous positions clearly shows the relative track of all the targets on the screen. A box to the right of the screen displays the speed over the ground, the vessel name, mmsi number and the latidude and longitude of any target selected by the user. As each vessel leaves a trail of previous positions the user can instantly see its relative position and bearing. Should any vessel cause concern (particularly if there is a risk of collision) it can be selected and its AIS data displayed. The MMSI number is immediately available so, in the last resort, a DSC call can be made directly to that vessel. If the user selects his own vessel then the screen repeats the users GPS position, course and speed over ground. Each vessel’s status is shown by a different symbol so the user can see if a vessel is underway, at anchor, fishing etc. The compact unit has a white backlit LCD display, operates from 12 volts and consumes little power. *AIS SART Plotter is an AIS receiver only and does not transmit AIS data. It should not be confused with an AIS transponder. Specifications: Ranges 0.125, 0.25, 0.5, 1, 2, 4, 8, 16 and 32 Nautical Miles Receives class A, B and SART AIS transmissions Tracks up to 30 vessels Uses standard Marine VHF antenna 161.975 and 162.025 MHZ operation Uses standard NMEA0183 GPS input High contrast display with white backlight Supply voltage 12 – 15v DC Consumption 50mA @ 12v (100mA with backlight) Optional stirrup mount bracket available Dimensions – width 150mm, Height 112mm, Depth 42mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

CLA2000 Deep Sea Class A AIS Transponder Digital Yacht’s CLA2000 is the ultimate SOLAS and inland waterway globally approved Class A AIS transponder. Water and weather proof to IP67, it has a full integrated 5” hi-res colour display supporting a wide range of functionality including electronic chart navigation with optional C-Map MAX charting and AIS target management. Proven, superior real world AIS message receive and transmit and message processing performance is delivered by advanced core SDR AIS technology. This state of the art technology ensures you see more targets, more of the time and at maximum range. The CLA2000 will find applications on SOLAS mandated vessels over 300GRT as well as workboats, rescue services, inland waterways users, RIBs, large yachts and any user wanting premium AIS performance and safety. The CLA2000 has optimised software for detecting AIS SART and MOB devices with a dedicated icon for this class of AIS. An automatic alarm is activated on detection of an AIS SART beacon activation. The target plot display will also calculate relative bearing of the device for easy visualisation of the target and rescue. The CLA2000 is fitted with a micro SD card reader located behind a waterproof cover on the front panel. This can support software updates, data logging of AIS and position data to a blank card as well as compatibility with C- Map MAX charting cards for optional detailed back ground charting. The CLA2000 has an integrated wireless interface for sending AIS and position data to smart phones, tablets, PCs and MACs for use with 3rd party charting and navigation apps. It supports client mode where it can connect to an existing wireless network or AP mode where devices can connect directly to the CLA2000. Up to 5 simultaneous/connected devices are possible. Features: Globally approved Class A AIS transponder High resolution, 800 x 480 pixel 5” colour display (MKD) with easy to use, fast user interface Bracket or flush mount – waterproof to IPX7 Integrated GPS with external antenna or utilise external NMEA feed (user selectable) 3 x NMEA 0183 interface (bi-directional for plotter, ECDIS, radar etc) 3 x sensor input ports (eg BlueBoard, external GNSS, gyro etc) NMEA 2000 interface Built in SD card slot for software updates, AIS data port logging or C-Map MAX mapping capability with optional C-Map data card Built in wi-fi for connection to iPads and tablets for wireless navigation Sophisticated AIS SART MOB alarm and display capability User programmable alarms for CPA and TCPA Advanced filtering of targets External alarm and remote silence switch capability

AIS Alarm Boxz The AIS alarm box is designed to ensure that the moment any AIS MOB or AIS SART signal is received an audible alarm is sounded ensuring everyone on the vessel is alerted to a possible MOB or a crew in need of rescue. Its simple design, compact nature and use of NMEA 0183 means that integrating the AIS Alarm Box into your AIS receiver and existing network is straight forward. The Ocean Signal AIS Alarm has the ability to be programmed by the user with up to 30 individual MMSI numbers, multiple tones to identify the source of the AIS signal (MOB or SART) as well as being waterproof to allow for external mounting. The AIS Alarm Box may be configured by the user to enter the up to 30 MMSI numbers to provide visual and audible alarms by downloading the software at the link below. Features: Panel or bracket mount Waterproof (for external mounting) Programmable with up to 30 individual device MMSI number NMEA0183-HS (38400baud) input 12V USB - Supplies with power and USB cable Detects AIS MOB and AIS SART devices Multiple tones to identify source Alarms on all received or specific targets NMEA through-port for easy integration WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SART100 AIS Search & Rescue Transponder Be ready for anything. Engineered for reliability the em-trak SART100 is an IMO-SOLAS-certified AIS search and rescue transponder. This market-leading search and rescue transponder can be stored for years, and when needed, can be instantly activated to transmit an emergency transmission to all AIS-equipped vessels including coastguard and aircraft, allowing them to pinpoint your exact location. The em-trak SART is ruggedized (IPx6, IPx7, and IPx8), comes as a complete kit, and can be stored away for many years ready for instant activation in the event of an emergency, giving you total peace of mind. Features: IMO Solas Certified and Approved AIS SART 5 years minimum maintenance-free continuous standby Easy to use in an emergency Ruggedized, weather and waterproof to IP66, IP67, and IP68 Complete kit, inclusive of the quick-release mounting bracket and grab bag Physical & Environmental Specifications: Size (h x w): 384 x 68 mm Weight: 360g Operating temperature: -25°C to +55°C Storage temperature: -25°C to +70°C Ingress protection: IPx6 and IPx8 Electrical Specifications: Battery capacity: 3000mAh Battery type: 6V Lithium primary cell Battery life (default operating conditions): 96hours Standards Compliance: AIS standards: IEC 61097-14 Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 Environmental standards: IEC 60945 Ed. 4 GNSS performance standards: IEC 61108-1 Ed 2.0 GNSS: Systems supported: GPS Channels: 48 Internal/external antenna: Internal only Time to first fix from the cold start: 35s VHF Transceiver: VDL access scheme: Modified SOTDMA Operating frequency: 161.975MHz and 162.025MHz Channel bandwidth: 25kHz Receivers/transmitters: 1 x transmitter AIS transmitter power: 1W (30dBm radiated) User Interface: Buttons: Activation and test Indicators: Status indicator In the Box: 1 x AIS SART 1 x Lanyard 1 x Telescopic Mounting Pole 1 x Mounting Bracket and Fixings 1 x Kit Bag

Class A AIS Transponder Furuno's FA170 is a Class A AIS Transponder with a 4.3" Color LCD Display. It displays symbols for AIS-equipped vessels, AIS-SARTs, coastal stations, and other aids to navigation within the VHF range. AIS data can be output to ECDIS, Radar, or other navigational equipment for collision avoidance support. The FA170 includes 6 in/out ports, 3 input-only ports, one LAN port, and one alarm output (contact closure) port. The unit is BAM (Bridge Alert Management) ready, meeting the specific requirements for BAM as specified in IMO MSC.302 (87). An optional Pilot Plug is available. This compact unit can store up to 2,048 AIS targets and AIS sarts. Selecting a target from the list generates a pop-up window where detailed information is displayed. You can also create an AIS message or send a name request to the target ship. When dangerous targets are detected, the FA170 provides a Dangerous Target list. The FA170 is also capable of exchanging short, safety-related messages with a specified MMSI or all AIS-equipped vessels via VHF channels. The FA170 can store up to 20 transmitters and 20 received messages. Features: Class A AIS Transponder with 4.3" Color LCD Display Displays Information about AIS-equipped ships, as well as coastal stations and Aids to Navigation within VHF coverage Outputs AIS data to ECDIS, Radar, and other navigational equipment Sufficient output ports for dual configuration of ECDIS and Radar Systems LAN Interface available for simple and efficient network integration BAM (Bridge Alert Management) is ready Optional available Pilot Plug Receives AIS-SART signals for assisting in streamlining SAR activities This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.