MIU L10 Underwater Series Size 10 (8") - White A thin, linear, ultra-uniform underwater light, the MIU L10 is great for tight spaces where a modern, bright, ultra durable light is needed.  At 18W total power with full chip-on-board LED technology, the L10 is available in White, Blue, Ice Blue and Green. 10-30V variable input, with SoftStart, Active Thermal Monitoring, a billet hardcoated Polycarbonate housing and Composite Laminate Technology included.  Perfect for vessels 16-20’ in length, the L10 measures 8 inches by 2.1 inches and 0.350 inches thick (203mm by 53mm by 8.9mm)

MIU S5 Series Underwater LED 10W - White The MIU S5 boasts impressive technologies for our small, pontoon specific underwater lighting line. Measuring 3.75 inches by 2.75 inches and only 0.300 inches thick (95mm by 51 mm by 7.6mm), the S5 is available as a flat back underwater light or with optional press-fit stainless steel mounting studs. Mounting studs allow quick and seamless installation to a standard aluminum plate and are 10-24 thread form nominally. 10-30VDC with onboard SoftStart and Active Thermal Monitoring, the S5 is 10W total power and utilizes a full chip-on-board LED. A full billet, hardcoated polycarbonate lens with our Composite Laminate Technology completes the package.

MIU60 Underwater LED - White - 10,000K Our largest underwater light currently available, the MIU60 V7 packs serious power and size! Create large unbroken swathes of light by choosing the worlds largest underwater light. 24 inches long, 4 inches tall and 0.35 inches thick (610mm by 102mm by 8.9mm) and packing 90W of total power for a very bright, very versatile lamp for larger vessels 35’ and up. Color options are consistent with our MIU15 and MIU30 size classes: White, Ice Blue, Royal Blue, Green, Wintergreen and Aqua.  Features Composite Laminate Technology (CLT) and a full billet hardcoated Polycarbonate chassis and OSRAM discrete LEDs.

ALPHA6 6" Waterproof Fixed LED Lightbar - White - 12W - 2,000 Lumens ALPHA is how Macris Industries does light bars!  Slim and trim, a departure from the big bulky and generic LED Lightbars currently available.  ALPHA features our proprietary Panoramic Spot Optics, which focus light in the vertical plane while allowing broad beam spread in the horizontal panorama.  Available in standard 6” compact size, with custom order lengths up to 50”, the ALPHA 6 draws just 1 Amp at 12V.  Proprietary Chip On Board LED engine and a solid, made in America heat sink set the ALPHA apart from all the rest!

Light Armor Underwater LED Light - 3 LEDs - White Light Armor Underwater Lights from Attwood, a line of premium surface-mount LED lights that are engineered to be the brightest and most durable lights in the industry. Like all Light Armor products, they're technically advanced, built to perform in the harshest marine environments, and backed by an industry-leading 10-year warranty. Intelligently Engineered for Strength and Durability Exclusive Heat-Sync Cooling System with Active Overheat Protection Resistant to corrosion, chemicals, and UV Damage Extreme impact-resistant lens 3' sheathed wire Reverse polarity protection Fully-sealed waterproof electronics Simple installation with minimal mounting hardware Low-profile design Electro-polished 316 stainless steel cover WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Light Armor Underwater LED Light - 6 LEDs - White Light Armor Underwater Lights from Attwood, a line of premium surface-mount LED lights that are engineered to be the brightest and most durable lights in the industry. Like all Light Armor products, they're technically advanced, built to perform in the harshest marine environments, and backed by an industry-leading 10-year warranty. Intelligently Engineered for Strength and Durability Exclusive Heat-Sync Cooling System with Active Overheat Protection Resistant to corrosion, chemicals, and UV Damage Extreme impact-resistant lens 3' sheathed wire Reverse polarity protection Fully-sealed waterproof electronics Simple installation with minimal mounting hardware Low-profile design Electro-polished 316 stainless steel cover WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Light Armor Underwater LED Light - 12 LEDs - White Light Armor Underwater Lights from Attwood, a line of premium surface-mount LED lights that are engineered to be the brightest and most durable lights in the industry. Like all Light Armor products, they're technically advanced, built to perform in the harshest marine environments, and backed by an industry-leading 10-year warranty. Intelligently Engineered for Strength and Durability Exclusive Heat-Sync Cooling System with Active Overheat Protection Resistant to corrosion, chemicals, and UV Damage Extreme impact-resistant lens 3' sheathed wire Reverse polarity protection Fully-sealed waterproof electronics Simple installation with minimal mounting hardware Low-profile design Electro-polished 316 stainless steel cover WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SeaBlaze Mini Underwater Light - Pair - Brushed Finish - White Non-Dimming The diminutive SeaBlaze Mini packs a surprising punch! SeaBlaze Mini leverages many of the technologies utilized in the world's most popular underwater light, the SeaBlaze3, to ensure years of trouble free service. With an actual MEASURED output of more than 700 lumens, there is simply no better value in underwater lighting. Perfect for smaller trailer boats, skiffs, or dinghies. Sold as a pair. Specifications: Voltage: 10 - 30V DC 12V DC Amps: 990mA 24V DC Amps: 450mA Correlated Color Temperature: 6500 Color Rendering Index: 70+ Lumens (White): 890 Rated Watts: 12 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 2.98" (7.57cm) Height: 2.98" (7.57cm) Depth: 0.58" (1.48cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SCR-24 Bronze Underwater Light - 24 LEDs - Great White The SCR series underwater LED lights are designed to be marine vessel hull mounted for continuous submersion in sea water. These models off a great value and small 4" diameter to fit many locations.  Multiple brightness options are available as well as single or multi-color. High Intensity Shadow-Caster underwater LED lights are designed to deliver the most intense optical output. Our unique design allows us to produce maximum light output and maximum LED life (over 40,000 hours). Robust Design With Shadow-Caster underwater LED lights, there’s no additional external components to install. Just connect the cable (submersible to 20 feet). All the necessary electronics are integrated into the housing and resistant to vibration and the elements. Surface Mounted Our lighting solutions feature a low profile design that requires no alteration to the main hull Wide Input Voltage Range Shadow-Caster’s underwater LED lights have an input range of 10 to 30 volts and work equally well on sets of 12 or 24 volts. Surge and Reverse Polarity Protection Our lighting systems have an innovative protection system that automatically disconnects the input entry when excessive voltage or reverse polarity is detected. Thermal Protection Our unique thermal protection features a control system that detects internal temperature and adjusts energy production down to avoid damage. Features: 90 Watts (7.5 amps @12 volts) 4 “ Outside Diameter Bronze Housing Scratch-Resistant Glass Lens Surge and Reverse Polarity Protection Thermal Throttling ( C ) Above Water Protection Shadow-Net Enabled Includes 10’ Submersible Cord & Install Diagram 10-40 Volts input 2- Year Warranty Made in the USA WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SR-L Series Marine Spreader Light - White Surface Mount - White Light with White Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light

SR-L Series Marine Spreader Light - White Surface Mount - White Light with Blue Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light

SR-L Series Marine Spreader Light - White Surface Mount - White Light with Red Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light

SR-L Series Marine Spreader Light - White Flush Mount - White Light with White Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light

SR-L Series Marine Spreader Light - White Flush Mount - White Light with Blue Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light

SR-L Series Marine Spreader Light - White Flush Mount - White Light with Red Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light