 |
Myers Pumps 26442C000 Seal Plate
|
39.69 |
|
 |
Myers Pumps ME40P-1 Effluent Pump 4/10Hp 115V
Myers ME40P-1 Cast Iron Effluent Pump Specifications
VOLTAGE: 1ø, 115V, 60 Hz
HORSEPOWER: 0.4 HP
AMP DRAW (full load): 12.0
MOTOR TYPE: Permanent Split Capacitor (PSC)
RPM: 1650
MAXIMUM HEAD: 32'
MAXIMUM CAPACITY: 80 GPM
SWITCH TYPE: Tethered Automatic
MINIMUM SUMP DIAMETER: Simplex 24" Duplex 36"
DISCHARGE PIPE SIZE: 1-1/2" FNPT
MAXIMUM SOLIDS HANDLING SIZE: 3/4" Spherical Solids
IMPELLER TYPE: Cast Iron, Two-Vane Enclosed
CORD LENGTH: 10'
CORD SIZE: 16-3; Type: SJTW
BODY CONSTRUCTION: Cast Iron
MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)
|
673.56 |
|
| |
Myers Pumps CMV5A-11 Sewage Pump 1/2Hp 115V
Myers CMV5A-11 is a 1/2-horsepower, 115-volt sewage pump that is designed for demanding residential installations. It is made with a combination of cast iron and thermoplastic for corrosion resistance. It also has a recessed vortex impeller that can handle solids up to 2 inches in diameter.
|
684.13 |
|
 |
Myers Pumps SRM4T 20 Sewage Pump 4/10Hp 115V 20'
The SRM4T 20 is made of cast iron and has an oil-filled motor for heat dissipation and continuous bearing lubrication. It is suitable for domestic wastewater septic pumping, large sumps, and residential septic tank sewage.
|
721.50 |
|
 |
Myers Pumps ME50S-11 Effluent Pump 1/2Hp 115V
Myers ME50S-11, Effluent Pump, 1/2 HP, 115 Volts, Manual, 1 Phase, 20 ft Cord, Cast Iron, 2 Inch Discharge
Features
Two-vane cast iron impeller design provides maximum dosing efficiency
Enclosed design for high-efficiency pumping
Eliminates possibility of jamming between impeller and volute
Passes full 3/4" solids
Durable motor will deliver many years of reliable service
Oil-filled motor for maximum heat dissipation and continuous bearing lubrication
Optional seal leak probe warns of seal leak condition (dual seal motors only); helps prevent costly motor damage
Motors have a winding current and temperature-sensitive overload (single phase only)
Volute seal ring is replaceable; restores pump to original performance if wear should occur
Motor is held in place by 4 screws; easily removed if service if ever needed
|
1771.38 |
|
 |
Myers Pumps ME100S-23 Effluent Pump 1Hp
Myers Pumps ME100S-23 Solids Handling Effluent Pump
1 HP, 230 Volts
3 Phase
2" Discharge
3/4" Solids
|
2300.06 |
|
| |
Myers Pumps 11716A001K Shaft Seal 718
|
85.54 |
|
| |
Myers Pumps 14525A000K Shaft Seal 5/8"
Mechanical Seal 5/8"
Replaces Myers 14525A000, 14525A010
|
33.08 |
|
| |
Myers Pumps 11416A000 Seal
Myers 11416A000K Shaft Seal for use with Model HC-33, HC-50, HC-75, HC-100, Series HC
|
98.28 |
|
| |
Myers Pumps 25208A001 Parts Kit
Myers 25208A001 PK50 Parts Kit for 1/2 HP. For Models: HT, HR, HJ and QD Jet Pumps.
Parts kit contains: Shaft seal, impeller, diffuser, gasket, O-ring, venturi and nozzle necessary to overhaul either shallow or deep well jet pumps.
|
242.97 |
|
| |
Myers Pumps 25208A002 Parts Kit
Myers 25208A002 PK75 Parts Kit for 3/4 HP. Models HT and HJ Jet Pumps.
Parts kit contains: Shaft seal, impeller, diffuser, gasket, O-ring, venturi and nozzle necessary to overhaul either shallow or deep well jet pumps.
|
291.20 |
|
| |
Myers Pumps 05014A193 Rubber Gasket
Myers 05014A193 is a Gasket Rubber .797 X 1/4
|
12.29 |
|
| |
Myers Pumps 05059A354 Gasket
Myers 05059A354 Paper Gasket is 7 3/4" x 7-1/32" x 1/64"
For use with Models: HC-75, HC-100, Series HC
|
13.23 |
|
| |
Myers Pumps 05059A318 Deflector Rubber
Myers 05059A318 Slinger, for Units with Separate Slinger.
For use with Models: HJ50S, HJ75S, HJ100S, HJ50D, HJ75D, HJ100D, HC-33, HC-50, HC-75, HC-100, Series HJ, HC & QP
|
16.07 |
|
| |
Myers Pumps 05014A124 Ring Pipe Rubber
Myers 05014A124, Pipe Ring, Rubber, for 1-1/4" Pipe, for use with Model HC-33, HC-50, HC-75, HC-100, Series HC
|
16.65 |
|
