|
Contains everything needed to install permanent fuel tank. Includes stainless steel gas deck fill, two 1-1/8" and four 2-1/4" stainless steel hose clamps, chrome plated brass thru hull vent, 12" of 1-1/2" fuel fill hose, 25" of 5/8" vent hose, 5/8" brass hose barb and two mounting strips.
|
124.99 |
|
|
A California law firm this week filed a class action lawsuit in U.S. District Court in Los Angeles, alleging oil companies failed to inform boat owners that ethanol causes damage to fiberglass fuel tanks.
The suit seeks to represent a class comprising all owners of boats with fiberglass fuel tanks who filled their tanks with ethanol-blended gasoline from a California retailer. The suit also seeks to represent all persons in California who own boats with fiberglass fuel tanks that had to be replaced because of damage caused by ethanol-blended gasoline bought from a California retailer.
The lawsuit, filed by Kabateck Brown Kellner, LLP, names major oil companies, including Chevron and Exxon Mobil Corp., as defendants.
Chevron said it has not yet been served with the lawsuit.
“As such, we are not in a position to comment,” said Lloyd Avram, Chevron media relations team leader.
According to court documents, Lawrence Turner, the plaintiff, bought ethanol-blended gasoline for his boat, which had a fiberglass fuel tank. Turner then discovered the ethanol in the gasoline began dissolving the boat's fiberglass fuel tank and caused damage to the boat's engine. The court documents said Turner was “forced to spend approximately $20,000 to fix the problems caused by the defendants' ethanol blended gasoline.”
"The price of gas is bad enough, but selling gasoline that dissolves gas tanks is a new low even for the oil companies," said Brian Kabateck, managing partner of Kabateck Brown Kellner and the lead attorney on the case, in a statement. "The oil companies know this fuel is corrosive, but they're keeping consumers in the dark to pump up their profits. The cost to the consumer is thousands of dollars in repairs."
Ethanol attracts water. When enough water is absorbed by the ethanol-blended gasoline, the ethanol and water solution separates from the gasoline, with the gasoline floating to the top. This results in a layer of water with a high concentration of ethanol at the bottom of the fuel tank.
There are many underground storage tanks that are made of fiberglass, but these were developed specifically to withstand ethanol. The vast majority of fiberglass tanks on boats were not designed to withstand ethanol.
|
|
|
EPA/CARB compliant 2-stage fuel cap is required on all portable fuel tanks, 12-gallon fuel capacity and less. Audible click signals that cap is sealed on neck fill. Tether secures cap to fuel tank while refueling. Auto self-venting pressure feature vents tank at 5 PSI (Min) when center pup-up vent is in open position. Manual momentary pressure relief valve relieves tank pressure prior to cap removal for refueling or connecting/disconnecting fuel line assembly. Positive vent closure for storage and transportation, designed to override of the automatic self venting and manual momentary pressure relief function. Fits both old style and new style Tempo and Moeller tanks.
|
43.69 |
|
|
Portable Fuel Tank - 3 Gallon with Gauge
Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards. Includes gauge.
Features:
3 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
High-Contrast, easy to read gage
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 16.6"
Width: (inch) 11.45"
Height: (inch) 7.3"
*No fuel line included
|
55.08 |
|
|
Portable Fuel Tank - 12 Gallon without Gauge
Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed.
Features:
12 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 22.75"
Width: (inch) 14.25"
Height: (inch) 14.47"
*No gauge or fuel line included
|
109.80 |
|
|
Portable Fuel Tank - 12 Gallon with Gauge
Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge.
Features:
12 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
High-Contrast, easy to read gage
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 22.75"
Width: (inch) 14.25"
Height: (inch) 14.47"
*No fuel line included
|
119.69 |
|
|
Portable Low Profile Fuel Tank - 12 Gallon with Gauge
Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge and low profile save space.
Features:
12 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
High-Contrast, easy to read gage
Save space; the low profile is 3 inches lower than regular 12-gallon tanks
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 24"
Width: (inch) 18"
Height: (inch) 11.61"
*No fuel line included
|
118.74 |
|
|
Portable Fuel Tank - 6 Gallon without Gauge
Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine.
Features:
6 Gallon fuel capacity
Compatible with 1/4" NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
Cap with built-in vacuum valve means no need for manual venting
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 19.82"
Width: (inch) 13.50"
Height: (inch) 9.16"
*No gauge or fuel line included
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
56.62 |
|
|
Portable Fuel Tank - 6 Gallon with Gauge
Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine. Includes gauge.
Features:
6 Gallon fuel capacity
Compatible with 1/4" NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
Cap with built-in vacuum valve means no need for manual venting
High-contrast & easy to read gauge
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 19.82"
Width: (inch) 13.50"
Height: (inch) 9.16"
*Fuel line is not included
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
62.87 |
|
|
90° P-Trap Fuel Tank Vent - Black with Black Vent Head
This Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness eliminates the need for an anti-siphon loop in the vent hose. It requires a ¾-inch installation hole and can be used with a maximum hull thickness of 9/16 inches.
Features:
Standard Mount - (inch) 5/8" I.D Hose
Reliably helps prevent water from entering the fuel tank
Still allows air to vent freely during normal sea conditions and washdowns
This black vent with a black vent head meets ABYC standards
*Compatible with Ethanol blended fuels.
|
13.12 |
|
|
90° P-Trap Fuel Tank Vent - Black with Stainless Steel Trim Cover
Composite 90-degree P-trap fuel tank vent 66419-3. These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose.
Features:
For 5/8" I.D. hose
(inch) 3/4" install. hole size
(inch) 9/16" max. hull thickness
Vents air from your boat's fuel tank as you fill the fuel tank
Splash-resistant, corrosion resistant
Meets ABYC standard
*Compatible with Ethanol blended fuels
|
11.94 |
|
|
Portable Fuel Tank - 3 Gallon without Gauge
Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards.
Features:
3 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 16.6"
Width: (inch) 11.45"
Height: (inch) 7.3"
*No gauge or fuel line included
|
48.78 |
|
|
Portable Low Profile Fuel Tank - 12 Gallon without Gauge
This Attwood 12-Gallon Fuel Tank is ideal for use in a pontoon boat, where greater fuel capacity is commonly desired for extended days on the water. This durable, sturdy tank is EPA-compliant and it features a low-profile design. It does not have a fuel gauge.
Features:
12 Gallon fuel capacity
Low-profile design
Compatible with 1/4-inch NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 24"
Width: (inch) 18"
Height: (inch) 11.61"
*No gauge or fuel line included
|
111.10 |
|
|
90° P-Trap Fuel Tank Vent - Flush Mount - Black with Stainless Steel Vent Head
This Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness. eliminates the need for an anti-siphon loop in the vent hose. This is a flush mount vent for use with a 5/8-inch interior diameter hose. It requires a 1-3/8-inch installation hole and can be used with a maximum hull thickness of 1 inch.
Features:
This black vent with a stainless steel vent head meets ABYC standards
Flush Mount - 5/8" I.D. hose
(inch) 1-3/8" install. hole size
(inch) 1" Max. hull thickness
*Compatible with Ethanol blended fuels
|
32.90 |
|
|
Fuel Tank Strap Set - 48 (inches) Long for 3-6 Gallon Tanks
This Attwood Fuel Tank Strap Set contains everything needed to secure a 3-6-gallon fuel tank in place. This kit includes a 48-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle. There are also 2 metal footman securing loops and the screws needed to install them. The strap can be run through the footman openings and then tightened and buckled to hold the tank in place.
Features:
Includes 48-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle
Run the strap through footman loops, then tighten and buckle to hold the tank in place
|
9.66 |
|