 |
Micropump 4546 Alum Mounting Plate
|
51.03 |
|
 |
Vision Series Mounting Plate for Raymarine T300 & T400 Thermal Cameras and Flir M-Series- Year 2017 and Newer
With Edson's Vision Series Mounting System once you have selected the mount you want to install your electronics to you must select the corresponding plate that has the correct bolt pattern for your electronics. Edson's 68600 Vision Series Mounting Plate is designed for Year 2017 and NEWER Raymarine T300 & T400 fixed Mount Pan/Tilt Thermal Cameras and FLIR M-Series (M-324XP, M-625XP, M-324L, M-625L, M-612L, M-618CS, M-324S, M-324CS, M-625S, M-625CS, M-617CS, M132, M232). Mounting Plates are required to complete an Edson Vision Series Mounting System. Order Base mount separately.
*7.8-inch Diameter with NO WING MOUNT CAPABILITIES
|
142.20 |
|
 |
Vision Series Mounting Plate for Simrad HALO™ Open Array - Hard Top Only
This powder coated marine-grade aluminum plate is used to mount a Simrad HALO™ Open Array on a hard top. The lifted mounting surface prevents drilling through an internal center conduit on many hard tops.
This product is used independently and is not compatible with the other Vision Series Mounts and Plates.
|
294.30 |
|
 |
4° Wedge for Under Vision Mounting Plate
While underway the bow of your powerboat tends to ride at an elevated angle, causing your radar to be angled. With Edson's 68810 4 degree Wedge for under Vision Mounting Plates the elevated bow will be offset aligning your radar to see better. Edson's 4 Degree Wedge requires an Edson Mounting Plate and an Edson Vision Series Mount. Order Base Mount and Mounting Plate separately.
Specifications
5.313" x 5.063"
3" Inner Diameter
|
62.70 |
|
 |
Top Gun Mounting Plate
Highest quality aircraft aluminum protected by the toughest anodizing. Extruded design offers maximum support when mounting outriggers into an aluminum T-Top or similar structure. Machined openings are available in horizontal or 10-degree offset..
Designed to weld into any top, supplied at 20" in length, they can be cut to fit your application. Rupp mounting plates have a 2.50" center hole with 5/16-18 threaded mounting holes at 3" x 5" centers.
|
86.66 |
|
 |
Vision Series Mounting Plate for Simrad HALO™ Open Array
Edson's Vision Series Mounting Plate allows the Simrad HALO™ to be mounted on a hard top or any of Edson's heavy-duty mounts. If you wish to use one of the Edson Vision Series Mounts, available in single, double, and triple mount configurations, the HALO™-specific mounting plate fits right into Edson's existing family.
The Vision Series Mounting Plate is made from marine-grade aluminum and finished with a white powder coat. This American-crafted mount is built to handle all of your adventures on the water, with style.
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mount sold separately.
|
89.99 |
|
 |
Deck Mount Plate
This adaptable 4" x 3" plate works with Cannon dual axis rod holders, pedestal mount tracks and downrigger pedestal mounts. Plates can be mounted in a variety of locations, and a protective mounting boot lets you avoid sharp edges.
Includes mounting hardware
|
29.59 |
|
 |
Universal Mounting Plate
With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's Universal Mounting Plate fits most brand and models 2kW, 4kW and Braodband Radars.
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
142.20 |
|
 |
Furuno & Sitex Mounting Plate
With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68510 Vision Series Mounting Plate is designed for both SiTex 2kw, 4kw Radar Domes (T-2041, MDS-9, MDS-8, MDS-1, T-941, T-921, T-761, T-760) and Furuno 2kw, 4kw Radars (15", 18”, 19” and 24" Domes and 3.5’ & 4' Open Arrays).
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
142.20 |
|
 |
Garmin 4ft Open Array Mounting Plate
With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68560 Vision Series Mounting Plate is designed for Garmin 4ft Open Array Radars (GMR 424 xHD2, GMR 624 xHD2, GMR 1224 xHD2, GMR 2524 xHD2, GRM Fantom 4).
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
142.20 |
|
 |
Garmin Mounting Plate for 18" & 24" HD, xHD, HD+ 4kW Radar domes
With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68520 Vision Series Mounting Plate is designed for Garmin 18 and 24 Radar Domes (GMR Fantom 18, GMR Fantom 24, GMR 18 HD+, GMR 18 xHD, & GRM 24 xHD).
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
142.20 |
|
 |
Simrad/ B&G/ Lowrance 4KW Radar Dome Mounting Plate
With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68540 Vision Series Mounting Plate is designed for Simrad, Northstar, B&G, & Lowrance 4kW, HD, 3G, & 4G Radar Domes (LRA-2400, NS007002, DX64S-1).
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
142.20 |
|
 |
Simrad/Lowrance/ B&G 2kW & 4G Radar Domes Mounting Plate
With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68530 Vision Series Mounting Plate is designed for Simrad, Northstar, B&G, & Lowrance 2kW, HD, 3G, & 4G Radar Domes (LRA-1800, NS007001, DX42S-1).
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
142.20 |
|
 |
Simrad/Lowrance/B&G/Sitex 4' Open Array Mounting Plate
With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68570 Vision Series Mounting Plate is designed for Simrad, B&G, Lowrance, and Sitex 4ft Open Arrays (TX06S1, NS007003).
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
142.20 |
|
 |
Raymarine 4ft Open Array Radar Mounting Plate
With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68580 Vision Series Mounting Plate is designed for Raymarine 4ft Open Array Radar (Quantum, Quantum 2, RD418D, RD424D, RD418HD, RD424HD).
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
142.20 |
|
