|
|
20.20 |
|
|
MP Pump 21381 FLOMAX 15 Self Priming Centrifugal Pump
MP Pumps Flomax 15 Self Priming Centrifugal Pumps for Water & Fertilizer w/ Pedestal Mount
FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.
A FLOMAX Pump is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.
The FLOMAX® series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.
Model: Flomax 15
Part #: MP21381
Size: 3 in. NPT
Flow-Rate: 320 GPM
Head Feet: 145
Features
Material of Construction: Cast Iron
Renewable wear plate
Stainless steel drive sleeve
Stainless steel fasteners
Up to a 25' suction lift
Applications
Agricultural
Industrial
Marine
OEM
|
1762.20 |
|
|
MP Pumps 21312, FLOMAX 5 Self Priming Centrifugal Pump
1-1/2" X 1-1/2" NPT Ports, Capacity up to 145 GPM, Total Head up to 100 feet.
FM5PMP C: PED 5.0
MP Pumps Flomax 5, 1-1/2" pedestal mount self priming cast iron pump # 21312. MP Pumps Flomax 5, rated at 100 GPM in cast iron construction with viton mechanical seal.
Specifications
Rated Capacity 100 GPM Maximum Discharge Pressure: 40 PSI Suction & Discharge Connections: 1-1/2" X 1-1/2" FNPT Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve, 304 stainless steel stub shaft to fit 5/8"; viton mechanical seal.
Features:
Material of Construction: Cast Iron
Renewable wear plate
Stainless steel drive sleeve
Stainless steel fasteners
Up to a 25' suction lift
5 blade impeller available for higher flows
Base plate shown above is optional
Double seal available for dry run applications
Hydraulic motor .22 cu. in.
Hydraulic motor .37 cu. in.
Hydraulic motor .45 cu. in.
Stainless steel impeller
|
1003.50 |
|
|
MP Pumps 21338 PUMP FM8 BRZ PED MNT
MP Pumps Flomax 8, 2" NPT self priming centrifugal pumps # 21338. Up to 140 GPM, up to 40 PSI (92'), 3450 RPM, all bronze construction. Removable flanges and replaceable wear plates protect the housing and eliminate wear. All fasteners are Stainless Steel. Standard mechanical seal have Viton elastomers.
Specifications
Rated Capacity 140 GPM Maximum Discharge Head
92 feet (40 PSI) Suction & Discharge Connections
2" X 2" FNPT
Construction:
Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss
weight 49 lbs.
304 stainless steel stub shaft
viton mechanical seal.
|
2989.43 |
|
|
MP Pumps 21383 FM 15 BRONZE PUMP
MP Pumps 21383, FLOMAX 15 Self Priming Centrifugal Pump, Wet End Only
FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators and Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.
3" X 3" NPT Ports
Capacity up to 320 GPM
Total Head up to 145 feet
Bronze construction
5.75 inch diameter impeller
|
6386.81 |
|
|
MP Pumps 36067 PUMP HHLF HR 2" GAS/DIESEL
MP Pumps 36067, HHLF High Head Low Flow Self Priming Centrifugal Pump End Only, 1-1/2" or 2" x 1-1/2" or 2"
High Pressure USCG Secifications Auxilary Fire Control HHLF2.0PPK B: ENG 1.0 6.7 HR
|
5163.79 |
|
|
MP Pumps 22925 PUMP HOUSING
|
156.00 |
|
|
MP Pumps 23234
Series 200 Standard End Suction Centrifugal Pump End Only, 2-1/2" x 2" NPT Ports, Capacity up to 300 GPM, Total Head up to 115 feet. S200PPK C: RR 2.5X2 CFR 1.12 4.62 IMP
|
1580.40 |
|
|
MP Pumps 21384 PUMP FM15 CI 1 1/8 MTR MNT
|
1640.70 |
|
|
MP Pumps 21354, FLOMAX 10 Self Priming Centrifugal Pump End Only
2" x 2" NPT Ports, Capacity up to 225 GPM, Total Head up to 145 feet. FM10PPK C: PEM 6.0
|
1428.30 |
|
|
MP Pumps 25922 PUMP FM8 C/I 7/8" MTR MT
|
821.70 |
|
|
MP Pump 23241 Pump Series 110 Ci Gas Eng
MP Pumps 23241 Series 110 End Suction Centrifugal Pump Cast
The SERIES 110 high volume centrifugal pumps are close-coupled to standard NEMA "C" face motors. Open adaptor protects motor. All models are available in cast iron, bronze or aluminum construction to suit a wide variety of liquids. All fasteners are stainless steel to reduce corrosion. Impellers are balanced to improve efficiency and bearing life. Standard carbon / ceramic / Viton mechanical seal is self-adjusting and corrosion resistant to handle almost any liquid.
|
814.50 |
|
|
MP Pump 26934 Pump Fm5Ppk C:Ccmtr 7/8 Sft
MP Pumps 26934, FLOMAX 5 Self Priming Centrifugal Pump End Only, 1-1/2" X 1-1/2" NPT Ports, Capacity up to 145 GPM, Total Head up to 100 feet. FM5PPK C: CCMTR 7/8 FA 5.0 BI
|
952.20 |
|
|
MP Pump 25951 Pump Fm8Ppk C:Ccmtr 7/8 Sft
MP Pumps 25951, FLOMAX 8 Self Priming Centrifugal Pump End Only, 2" X 2" NPT Ports, Capacity up to 150 GPM, Total Head up to 100 feet. FM8PPK C: CCMTR 7/8 FA 5.0 BI
|
972.00 |
|
|
MP Pump 28940 Pump Fm5Ppk C:Ccmtr 7/8 Sft
MP Pumps 28940, FLOMAX 5 Self Priming Centrifugal Pump End Only, 1-1/2" X 1-1/2" NPT Ports, Capacity up to 145 GPM, Total Head up to 100 feet. FM5PPK C: CCMTR 7/8 FA 5.0 BI BWP
|
1053.90 |
|