|
Modular Top Plate for Kymeta U8 Peregrine
Kymeta’s industry-leading, easily mountable, electronically steered antennas provide satellite and cellular connectivity where and when you need it. Seaview has partnered with Kymeta to provide this top plate mounting solution.
Features:
Designed specifically for the Kymeta Peregrine antenna
Specifications:
Mounting Type: Kymeta Modular Top Plate
Mount Style: Kymeta Top Plate for Seaview Mounts
|
470.40 |
|
|
ADAF3 Modular Top Plate for FLIR M300 Series Thermal Cameras f/Mounts Ending in M1 or M2
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Unique Design
No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.
Note: This only applies to the ADA-R1, ADA-S1 & ADA-S2 Top Plates
King Starboard
The ADA-R2, ADA-S3, ADA-S4 & ADA-F1 Top Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation.
|
192.00 |
|
|
Starlink Maritime Top Plate for Seaview M1 & M2 Style Modular Mounts
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Features:
Starlink Wedge Base hole pattern pre-dimpled in this modular top plate
Water-tight gasket in the center of the plate to pass the Starlink cable
The 1” thick starboard plate can accommodate a Seaview light bar
|
168.00 |
|
|
Starlink Maritime Top Plate for Seaview M1 Style Modular Mounts
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Features:
Water-tight gasket in the center of the plate to pass the Starlink cable
Predrilled and all hardware needed to mount the Starlink is included
*Not light bar compatible
|
163.20 |
|
|
KVH V30 Modular Top Plate
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Compatible Units:
KVH V30
|
196.80 |
|
|
Starlink Maritime Black Top Plate for Seaview M1 & M2 Style Modular Mounts
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "Swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Features:
Starlink Wedge Base hole pattern pre-dimpled in this modular top plate
Water-tight gasket in the center of the plate to pass the Starlink cable
The 1” thick starboard plate can accommodate a Seaview light bar
|
168.00 |
|
|
Starlink Maritime Top Plate for Seaview M1 Style Modular Mounts - Black
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "Swiss Cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Features:
Water-tight gasket in the center of the plate to pass the Starlink cable
Predrilled and all hardware needed to mount the Starlink is included
*Not light bar compatible
|
163.20 |
|
|
ADAF2 Black Modular Top Plate for FLIR M100 or M200 Series Cameras for Use with Mounts Ending in M1 or M2
This Seaview top plate is for FLIR M100 or M200 thermal cameras. This one-piece design gives the top plate a nice clean look and is made from King Starboard.
|
192.00 |
|
|
Modular Plate for Most Closed Domes & Open Arrays - Black
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Unique Design
No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.
Note: This only applies to the ADA-R1, ADA-S1 & ADA-S2 Top Plates
King Starboard
The ADA-R2, ADA-S3, ADA-S4 & ADA-F1 Top Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation.
|
134.40 |
|
|
Modular Plate for Most Closed Dome and Open Array Radars
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Unique Design
No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.
|
139.20 |
|
|
Modular Plate for Intellian/KVH/Glomex/Thrane & Thrane/Raymarine/Sea-King/Sea-Tel/VDO
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Unique Design
No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.
|
182.40 |
|
|
Modular Plate for KVH/Intellian/Raymarine/Sea-King/Sea-Tel/VDO
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Unique Design
No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.
|
254.40 |
|
|
5" Modular Mount Aft Raked 7x7 Base Top Plate Required - Black
This Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost effective choice. A Seaview Modular Top Plate is required and sold separately!
Modular Top Plate
A Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.
Modular Design
The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.
Compact Design
Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.
|
254.40 |
|
|
5" Modular Mount FWD Raked 7" x 7" Base Plate - Top Plate Required
This Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost effective choice.
Modular Top Plate
A Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.
Modular Design
The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.
Compact Design
Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.
|
240.00 |
|
|
5" Modular Mount AFT Raked 7" x 7" Base Plate - Top Plate Required
This Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost effective choice.
Modular Top Plate
A Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.
Modular Design
The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.
Compact Design
Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.
|
240.00 |
|