|
A2.5 4 Color Downlight with Stainless Steel Trim - 8-30V
Scandvik’s A2.5 LED Down Light with class-leading output, sealed weatherproof construction, and simple 2-wire installation is a favorite amongst boatbuilders. Intelligent circuitry allows color changes from white to blue, red, and green without specialized switches or controllers. Only a simple 2-position (on/off) toggle switch is needed. Switch the light off and on again within 1.5 seconds to cycle through each of the four colors. Turning the light off for more than 1.5 seconds resets the light to white.
Features:
Easy to install, spring-loaded butterfly clips hold the A2.5 firmly in place
Works on 12V & 24V systems
The light colors are white, blue, red, and green
2 in. mounting hole
Recessed mount with spring clips
286 lumens
IP67
Applications:
This 316 stainless steel fixture is suitable for overhead exterior locations such as T-tops, hard tops, and mezzanines
*The "P" within the part number indicates retail packaging
|
57.72 |
|
|
13.5" CM Mooring Buoy w/SS Iron - Red
The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.
With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).
The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.
Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Stainless Steel
Size - 13.5" x 18" (34.3 x 45.7cm)
Tube Diameter - .625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 6.6 gallons (25L)
*Sold as an Individual
|
259.76 |
|
|
13.5" CM Mooring Buoy w/SS Iron - White Blue Stripe
The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.
With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).
The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.
Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Stainless Steel
Size - 13.5" x 18" (34.3 x 45.7cm)
Tube Diameter - .625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 6.6 gallons (25L)
*Sold as an Individual
|
259.76 |
|
|
4" Locker Light with Touch Switch - 10-30V - Stainless Steel
This compact locker light is small enough to mount almost anywhere where light is needed. Designed to illuminate the inside of lockers, hatches, closets, and/or bilges. The light features a 316 stainless steel trim ring and a built-in on/off switch that is backlit with a blue LED so that it is easily located even in the darkest of lockers. A touch-switch sensor immediately turns on the light when activated.
Features:
IP65 rated for installation in wet lockers
Works with 12V and 24V systems
Impact-resistant plastic lens
316 Stainless Steel Trim Ring
6 Warm White LEDs (2900-3200K)
Surface mount, 2 SS Screws included
Specifications:
10-30V
Amps: 0.03
Lumens: 210
*The "P" within the part number indicates retail packaging
|
27.35 |
|
|
4" Locker Light with Motion Sensor - 10-30V - Stainless Steel
This compact locker light is small enough to mount almost anywhere where light is needed. Designed to illuminate the inside of lockers, hatches, closets, and/or bilges. The light will automatically turn on when you open the hatch or door. The sensor immediately turns on the light when triggered by a combination of movement within 6 feet and a temperature of 98 degrees. The light will shut off after 20 seconds unless there is movement.
Features:
IP65 rated for installation in wet lockers
Works with 12V and 24V systems
Impact-resistant plastic lens
316 Stainless Steel Trim Ring
6 Warm White LEDs (2900-3200K)
Surface mount, 2 SS Screws included
10-30V
Specifications:
Amps: 0.03
Lumens: 210
*The "P" within the part number indicates retail packaging
|
27.95 |
|
|
March 0156-0004-0300-4.187 Imp W/Mica Teflon Bsg 4.187
|
765.12 |
|
|
March 893-10-1/4" 24V Pump W/ 1286-0002-0100
|
351.00 |
|
|
Furuno FCV588 8.4" Color Fishfinder w/ Rezboost
The 8.4" FCV588 is a dual-frequency fish finder equipped with revolutionary new RezBoostT signal processing technology that increases resolution and improves target separation by up to 8x, utilizing a compact narrowband transducer. It offers improved clarity and resolution previously impossible with conventional narrowband transducers. A fast transmission rate of 3,000 PRR (Pulse Repetition Rate) per minute (at 5 m depth range), ensuring excellent target separation and clarity.
The FCV588 includes a White Line feature to easily and accurately discriminate fish lying near the bottom. The top edge of the bottom echo is displayed in white to clearly show bottom structures. This feature helps to discriminate between weeds and bottom fish.
The FCV588 also offers a number of unique features only found on Furuno Fish Finders. ACCU-FISHT is a unique fish size analyzer based on the latest digital technology. Accu-Fish allows the FCV588 to display the actual fish size on individual fish echoes on-screen. When used concurrently with Fish Marks, Accu-Fish is a great help in identifying fish targets on the display. Alternatively, Accu-Fish can display the actual depth of the fish target instead of fish size.
Bottom Discrimination provides an at-a-glance recognition of bottom composition with four types of graphical displays (Rocks/Sand/Gravel/Mud) when connected to a supported thru-hull or transom mount transducer.
Configurable Alarm function (depth, fish echoes, etc.)
Furuno's TLL (Target Lat/Lon) output allows you to share and display information on a chart plotter. Easily interface the FCV588 with your Furuno Chart Plotter so that you can mark fishing grounds with various information (L/L, Depth, Water Temp, Fish size and Bottom type).This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1307.34 |
|
|
5" Weatherproof PA Speaker w/Plastic Base
Frequency Response: 300Hz 15kHz
Max Power: 15W
Sensitivity: 105dB 1W/1M
Impedance: 8 Ohms
Size: 5” Diameter x 4-3/4” Length
Weatherproof ABS construction
Includes 10' cord with 3.5mm plug
|
16.48 |
|
|
B3 Downlight Surface Mount - Cool White - SS Trim - IP67 - 12/24V
Scandvik’s low profile B3 (3/8 in. height) surface-mounted, single-color downlight is manufactured to be simple and budget-friendly. The polished stainless steel snap-over trim ring is a nice upgrade from the inferior chrome plastic bezels of the past. The fixture is popular as a T-Top light because it looks like a flush-mount light without the hassle of cutting holes.
Features:
The light color is cool white
95 Lumens
10-30 VDC
1 Watt
IP67
*The "P" within the part number indicates retail packaging
|
17.82 |
|
|
B3 Downlight Surface Mount - Blue - SS Trim - IP67 - 12/24V
Scandvik’s low profile B3 (3/8 in. height) surface-mounted, single-color downlight is manufactured to be simple and budget-friendly. The polished stainless steel snap-over trim ring is a nice upgrade from the inferior chrome plastic bezels of the past. The fixture is popular as a T-Top light because it looks like a flush-mount light without the hassle of cutting holes.
Features:
The light color is blue
13 Lumens
10-30 VDC
1 Watt
IP67
*The "P" within the part number indicates retail packaging
|
17.82 |
|
|
Ted CT Downlight - 2W - SS Round Touch - Warm
The Ted Club Touch is an IP40 recessed Power LED downlight. It has a 72mm round trim composed of AISI 316 stainless steel and a frosted lens.
Specifications:
Weight: 0.25 lbs.
Dimensions: 0.25 × 0.25 × 0.25 in
Trim Finish: Stainless steel
Power Type: Constant voltage
Light Source: 1 x high luminosity
Supply: 10 - 30 V
Power Consumption: 2 W
Current Consumption: 0.09 A @ 24V
Average Lifetime: 50,000 hours
Dimmable: Yes
IP Security degree: 40
Frame Diameter: 2-53/74″
Recess: 5/8"
Hole Diameter: 2-1/8"
Frame Material: AISI 316 stainless steel
Light Color: Warm
Mounting: Screws
Warm White Specifications:
Angle: 100°
Light Flow: 105 lm
Efficiency: 58 lm/W
Light Beam – Distance 1 m: Diameter 2.43 m / 40.8 lux
Light Beam- Distance 2 m: Diameter 4.85 m / 10.2 lux
Light Beam- Distance 3 m: Diameter 7.28 m / 4.5 lux
|
73.19 |
|
|
LED 304 Stainless Steel LED Reading Light - 8-30V
This is a 304 stainless steel LED cabin and reading light.
Features:
12/24V
Adjustable swivel light
On/off rocker switch
8-30 VDC, 3.1 Watt
16 SMD 2835 warm white LEDs
154 lumen
120° Beam angle
*The "P" within the part number indicates retail packaging
|
49.91 |
|
|
8" Scan-Strip 4 Color LED Light - RGBW
This 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green.
Features:
Switching off for more than 4 seconds resets the color to white
RGBW LEDs
Colors are daylight white (4000-4500K), blue, red, green
Lifespan 30,000+ Hours
12/24 Volt
IP65 can be installed in engine rooms and exterior locations
Ideal for under-gunwale lighting
SS Mounting Screws Included
Specifications:
Beam Angle: 120°
Watts: 1.2
Lumens: 94
Dimensions (L X W x H) (inch): 8-7/8" x 7/8" x 1/2"
*The "P" within the part number indicates retail packaging
|
21.58 |
|
|
16" Scan-Strip 4 Color LED Light - RGBW
This 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green.
Features:
Switching off for more than 4 seconds resets the color to white
RGBW LEDs
Colors are daylight white (4000-4500K), blue, red, green
Lifespan 30,000+ Hours
12/24 Volt
IP65 can be installed in engine rooms and exterior locations
Ideal for under-gunwale lighting
SS Mounting Screws Included
Specifications:
Beam Angle: 120°
Watts: 2.4
Lumens: 180
Dimensions (L X W x H) (inch): 16" x 7/8" x 1/2"
*The "P" within the part number indicates retail packaging
|
31.60 |
|