Compact Bracket Mount LED Spreader Light - White This compact spreader light features 3 each powerful 3W LEDs, comparable to a 75W halogen bulb. Durable Zytel housing is UV resistant and is sure to withstand the elements for many seasons. A stainless steel bracket allows you to direct the light where it is most needed. Features: White housing 12/24 Volt, 5 Watt Polycarbonate Lens 610 Lumens IP67 *The "P" within the part number indicates retail packaging

Bracket Mount LED Spreader Light - White Scandvik's bracket-mount LED Spreader Light is the perfect solution to illuminate your deck or cockpit. Featuring five daylight white 3W LEDs providing 900 effective lumens, A white Zytel® composite housing was designed specifically for the rigors of the marine environment.  Features: An adjustable stainless steel bracket mounting solution allows the light to be aimed where it is needed most Guaranteed against corrosion, discoloration, and water intrusion Comparable to a 120-watt Halogen bulb. 12/24 volts (8-30 volts) UV-resistant Zytel® Nylon Resin housing Polycarbonate Lens IP68 *The "P" within the part number indicates retail packaging

High Intensity Outdoor Dimmable LED Spreader Light - White Lunasea Spreader offers 1,000 lumens of lights and focuses it from bow to stern. A spreader light that delivers. Designed for distance, engineered for quality. Using two of the brightest single point light source LED's married with a lens, Lunasea puts the light where you want it - On your boat deck! Most spreader lights cast a large quantity of light outside your boat while other spreaders focus their little intensity on small areas. If polarity is swapped on the power, the light dims down which is ideal for a beautiful night sipping on a cocktail. All this while only drawing 11 watts of power." Features: IP67 rated 3 different mounting positions 1,100 lumens of light White

A3 Downlight - Surface/Flush Mount - Stainless Steel This Scandvik A3 Surface Mounted LED Down Light is a single-color light. This A3 Surface Mount Series light features a snap-over bezel in Polished 316 stainless steel and a surface mount collar in a matching color. The A3 mounts securely overhead using two screws. Single-color lights have a two-wire (positive/negative) connection and work with a common switch (on/off).  Features: 316 stainless steel trim 6 x 0.5-watt warm white LED 242 Lumens 2.2 Watt 12 Volt   IP67 Applications: A3s are a good choice for general overhead lighting on smaller boats or as undercabinet lighting for any size vessel Other applications include hard tops, arches, walkway overhangs, shower stalls, or any area that lacks the depth to recess mount a fixture *The "P" within the part number indicates retail packaging

Round Surface Mount L.E.D. Dome Light w/ On/Off Switch (1356) White Powder Coat Clear Translucent Plastic Globe 12 Volt L.E.D.s Draw Less Than 10 Watts Dimmer Capable L.E.D.s Screw Size No. 8 R.H. Depth Overall 1" 3 L.E.D.s 3 watt

2" Marine Flush Mount Spreader Light - White Housing - Pro Series 3.0 Black Oak LED's Marine Flush Mount Spreader Light is the perfect low profile mount for fiberglass T-Tops, gunwale mounting, and any other location where users need low-profile lighting with a huge output. This light uses 2 - 10w Cree LEDs, producing 1,560 lumens and throwing in a 90° pattern, which is perfect for lighting fore and aft decks as well as any area lighting that users may need. These lights are DuPont powder coated to make sure they can take sun and salt exposure and still look as great as the day they were purchased. All of Black Oak's lights have the highest IP rating available, IP69k, which means users don't have to worry about the location of these lights; they can take any amount of water thrown at them! Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Spreader light 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Spreader Light Aft deck fishing lights Foredeck lights Accent lighting Game fishing lights Boat wake lights Technical Specifications: Total Wattage: 20W Amp. Draw: 1.4 LED Quantity: 2 Weight: 0.7 lbs. Raw Lumens: 1560 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height x Depth): 4-1/4" x 2-3/8" x 2-1/2”  Mounting Holes: 3-1/2” apart horizontally In the Box: 2” marine white spreader light Wiring pigtail  Stainless steel mounting kit *Sold as an Individual

4" Marine Flush Mount Spreader Light - White Housing - Pro Series 3.0 With the increasing size of boats and the major popularity of Black Oak's 4" Marine Scene Spreader Lights, Black Oak's 4 Inch Flush Mount Marine Spreaders were born. Perfect for larger center consoles, sportfish yachts, and many other applications. This light gives off a whopping 3,120 raw lumens and a very widespread 120-degree light pattern.  Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Spreader light 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Spreader Light Aft deck fishing lights Foredeck lights Accent lighting Game fishing lights Boat wake lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 0.35 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height x Depth): 6-3/8" x 3-3/16" x 2-1/4”  Mounting Holes: 5-5/8” apart horizontally In the Box: 4” marine white flush mount spreader light Wiring pigtail  Stainless steel mounting kit *Sold as an Individual

SCM-SL Series Flush Mount Spreader Light - White Housing - White The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch. Features: Soft start technology ramps the brightness up gently over 2 seconds. Power toggle feature to set brightness and change color True white LED for best color performance High-efficiency switch mode power supply Waterproof low-profile aluminum housing White or black finish Unique reflector design to reduce glare Specifications: 1500 lumen output 60-degree beam angle 16-watt power draw 10-30 volts Input 1.4A at 12 volts, 0.7A at 24 volts 6200 Kelvin cool white color temperature 5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth. IP67 waterproof design Durable glass lens The full-color version includes Shadow-NET® interface for controlling color Includes: Spreader light Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version Quick start guide Standard 2 year warranty

SCM-SL Series Flush Mount Spreader Light - White Housing - White/Blue/Red The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch. Features: Soft start technology ramps the brightness up gently over 2 seconds. Power toggle feature to set brightness and change color True white LED for best color performance High-efficiency switch mode power supply Waterproof low-profile aluminum housing White or black finish Unique reflector design to reduce glare Specifications: 1500 lumen output 60-degree beam angle 16-watt power draw 10-30 volts Input 1.4A at 12 volts, 0.7A at 24 volts 6200 Kelvin cool white color temperature 5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth. IP67 waterproof design Durable glass lens The full-color version includes Shadow-NET® interface for controlling color Includes: Spreader light Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version Quick start guide Standard 2 year warranty

SCM-SL Series Flush Mount Spreader Light - White Housing- Full-Color The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch. Features: Soft start technology ramps the brightness up gently over 2 seconds. Power toggle feature to set brightness and change color True white LED for best color performance High-efficiency switch mode power supply Waterproof low-profile aluminum housing White or black finish Unique reflector design to reduce glare Specifications: 1500 lumen output 60-degree beam angle 16-watt power draw 10-30 volts Input 1.4A at 12 volts, 0.7A at 24 volts 6200 Kelvin cool white color temperature 5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth. IP67 waterproof design Durable glass lens The full-color version includes Shadow-NET® interface for controlling color Includes: Spreader light Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version Quick start guide Standard 2 year warranty

Caprera3 Spreader Light - White Non-Dimming - White Housing Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models. Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Caprera3 Spreader Light - White Dimming - White Housing Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models. Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Caprera3 Spreader Light - White Non-Dimming - Black Housing Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models. Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Capri3 Spreader Light - White Non-Dimming - White Housing Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models. Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Capri3 Spreader Light - White/Red Dimming - Black Housing Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models. Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood