|
Bumper Rope with Carabiner
5-foot Bumper Extension Upgrade and Carabiner.
Features:
5' poly rope braided
Grey Poly rope with black strands
Includes a float
One side has a carabiner for the bumper
The other side gets an 8” loop
Upgrade M3001 bumper ropes with this high-end 5-foot extension
Also great for dock lines
Tie up your boat or kayak as well
|
13.50 |
|
|
Premium Anchor Rode 215'-15' of 1/4" Chain & 200' of 1/2" Rope w/Shackle
This Premium Lewmar 215' anchor rode kit features 15 feet' of windlass chain spliced to 200' of 8 Plait line.
Features:
Eight (8) Plait rope is woven together with eight (8) individual braided strands. Outperforms the 3-strand once it is wet and used.
Technical Specifications:
Total Length - 215'
Chain Length - 15'
Chain Size - 1/4"
Chain Type - G4
Rope Length - 200'
Rope Size - 1/2"
Rope Type - Eight (8) Plait
Shackle - Not included
*Sold as an Individual
|
507.36 |
|
|
5' Boat Bumper
FATSAC Bumpers are a great way to protect your boat from any scratches, dents, or dings during boat tie-ups, lake parties, or when pulling your boat up to a dock to gas up. They can also be hung from your dock to protect your boat when pulling back up whether to pick up more friends or grab more gear!
Features:
5’ feet long x 20” diameter
UV-resistant material and ink.
Made from the same durable high strength material as our Fat Sacs.
Seams are welded and taped for extra durability
Includes 2 of the 5’ foot rope extensions, to be used on each tie-down cleat (1 on each end), to hang the bumper.
Bumpers are inflated through the Halkey-Roberts air valve fitting. FatSac air pumps work best to fill the bumpers, however, bumpers can be filled with any air pump.
FatSac Bumpers can be hung off the side of a boat or the side of a dock. IMPORTANT – After filling, ensure the air-fitting cap is screwed on tight to keep air from leaking out.
Hang the FatSac Bumper using the cleats on each end. Bumpers should sit on the water or slightly above to prevent a collision.
*FatSac Bumpers are to be used only for boat tie-ups and docks. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!
|
190.36 |
|
|
15' Boat Bumper
FATSAC Bumpers are a great way to protect your boat from any scratches, dents, or dings during boat tie-ups, lake parties, or when pulling your boat up to a dock to gas up. They can also be hung from your dock to protect your boat when pulling back up whether to pick up more friends or grab more gear!
Features:
15’ feet long x 20” diameter
UV-resistant material and ink.
Made from the same durable high strength material as our Fat Sacs.
Seams are welded and taped for extra durability
Includes 2 of the 5’ foot rope extensions, to be used on each tie-down cleat (1 on each end), to hang the bumper.
Bumpers are inflated through the Halkey-Roberts air valve fitting. FatSac air pumps work best to fill the bumpers, however, bumpers can be filled with any air pump.
FatSac Bumpers can be hung off the side of a boat or the side of a dock. IMPORTANT – After filling, ensure the air-fitting cap is screwed on tight to keep air from leaking out.
Hang the FatSac Bumper using the cleats on each end. Bumpers should sit on the water or slightly above to prevent a collision.
*FatSac Bumpers are to be used only for boat tie-ups and docks. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!
|
263.26 |
|
|
Combo Fender/Rope Wrap with Carabiner
This combo combines the best of both worlds. The fender wrap allows you to attach to almost any object. the carabiner rope wrap allows for quick and easy retrieval of ski ropes, life jackets, virtually anything you can wrap and hang.
|
25.98 |
|
|
Wally Plug with O-Rings
FatSac Replacement Ballast Bag Plug is used to plug unused holes on FatSac ballast bags. Fits the proprietary thread pattern used on FatSac bags making a perfect water-tight seal that won't leak or back out over time.
Off-the-shelf FatSac ballast bags include the required number of bag plug fittings, but if you're misplaced one or want to have extras, this is the fitting you need to close any unused holes on the bag.
FatSac ballast fittings have been designed with you in mind. All of the fittings make connecting pumps and hoses to your FatSac a quick and simple task.
Features:
Wally plug
O-ring
*Sold as an Individual
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
7.70 |
|
|
Iridium GO!® Carry Bag with Carabiner
The Iridium GO! carry bag has a durable, rigid exterior with a soft, felt-lined interior and zippered opening. It stores the Iridium GO!, a USB cable, and one power adapter, and includes a clip-on carabiner.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
37.33 |
|
|
Bumper Cap with Insect Screen - 2-Pack
Replace lost or damaged RV bumper caps with Camco’s RV bumper caps, featuring vent holes and a squeeze grip for easy installation and removal. Holes allow ventilation while keeping flying insects out. It fits standard OEM 4-inch square bumpers and is constructed of durable polyethylene. Patented.
Features:
Keeps nesting insects out; smaller holes provide no-insect ventilation
Fits standard OEM 4-inch square bumpers
Squeeze grip for easy installation and removal
Includes clip-on saver
Durable polyethylene construction
*Sold as a pack (2)
|
5.96 |
|
|
Anchor Rode 5' of 1/4" G4 Chain & 100' of 1/2" Rope with Shackle
This Lewmar 105' anchor rode kit features 5 feet' of windlass chain spliced to 100' of 3-strand line and comes with a D shackle.
Features:
Specifically made to go with the rope-chain gypsies that come standard on all Lewmar windlasses
Calculated for an even pitch
The hot-dip galvanizing reduces corrosion
High-strength welding
Your windlass runs more smoothly with a smooth rope-to-chain transition
Hand-sewed whipping assures unraveling
Technical Specifications:
Total Length: 105 ft.
Chain Length: 5 ft.
Chain Size: 1/4 in.
Chain Type: G4
Rope Length: 100 ft.
Rope Size: 1/2 in.
Rope Type: 3 Strand
Shackle: 5/16 in. D
*Sold as an Individual
|
212.86 |
|
|
Anchor Rode 15’ 5/16” G4 Chain with 300’ 5/8” Rope with Shackle
An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation.
*A shackle is included for a secure and convenient anchor attachment point
Features:
High-strength, welded chain rated to high-test G4 specs
Hot-dip-galvanized chain links to minimize corrosion
Calibrated for an even pitch
Smooth rope-to-chain transition for seamless windlass operation
Treated, windlass-grade, 3-strand, twisted nylon rope
Fitted to all Lewmar windlasses and rope chain gypsies
Works With:
Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses
Specifications:
Rope: 300 ft. 5/8 in. 3-strand nylon
Chain: 15 ft. 5/16” G4 chain
|
1098.38 |
|
|
Anchor Rode 15’ 5/16” G4 Chain with 150’ 5/8” Rope with Shackle
An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation.
*A shackle is included for a secure and convenient anchor attachment point
Features:
High-strength, welded chain rated to high-test G4 specs
Hot-dip-galvanized chain links to minimize corrosion
Calibrated for an even pitch
Smooth rope-to-chain transition for seamless windlass operation
Treated, windlass-grade, 3-strand, twisted nylon rope
Fitted to all Lewmar windlasses and rope chain gypsies
Works With:
Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses
Specifications:
Rope: 150 ft. 5/8 in. 3-strand nylon
Chain: 15 ft. 5/16” G4 chain
|
412.34 |
|
|
Anchor Rode 15’ 5/16” G4 Chain with 300’ 5/8” Rope with Shackle
An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation.
*A shackle is included for a secure and convenient anchor attachment point
Features:
High-strength, welded chain rated to high-test G4 specs
Hot-dip-galvanized chain links to minimize corrosion
Calibrated for an even pitch
Smooth rope-to-chain transition for seamless windlass operation
Treated, windlass-grade, 3-strand, twisted nylon rope
Fitted to all Lewmar windlasses and rope chain gypsies
Works With:
Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses
Specifications:
Rope: 300 ft. 5/8 in. 3-strand nylon
Chain: 15 ft. 5/16” G4 chain
|
1016.38 |
|
|
Anchor Rode 20’ 5/16” G4 Chain with 300’ 5/8” Rope with Shackle
An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation.
*A shackle is included for a secure and convenient anchor attachment point
Features:
High-strength, welded chain rated to high-test G4 specs
Hot-dip-galvanized chain links to minimize corrosion
Calibrated for an even pitch
Smooth rope-to-chain transition for seamless windlass operation
Treated, windlass-grade, 3-strand, twisted nylon rope
Fitted to all Lewmar windlasses and rope chain gypsies
Works With:
Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses
Specifications:
Rope: 300 ft. 5/8 in. 3-strand nylon
Chain: 20 ft. 5/16” G4 chain
|
710.58 |
|
|
Anchor Rode 15’ 5/16” G4 Chain with 200’ 5/8” Rope with Shackle
An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation.
*A shackle is included for a secure and convenient anchor attachment point
Features:
High-strength, welded chain rated to high-test G4 specs
Hot-dip-galvanized chain links to minimize corrosion
Calibrated for an even pitch
Smooth rope-to-chain transition for seamless windlass operation
Treated, windlass-grade, 3-strand, twisted nylon rope
Fitted to all Lewmar windlasses and rope chain gypsies
Works With:
Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses
Specifications:
Rope: 200 ft. 5/8 in. 3-strand nylon
Chain: 15 ft. 5/16” G4 chain
|
727.07 |
|
|
Anchor Rode 215'-15' of 1/4" Chain & 200' of 1/2" Rope with Shackle
This Lewmar 215' anchor rode kit features 15 feet' of windlass chain spliced to 200' of 3-strand line and comes with a D shackle.
Technical Specifications:
Total Length - 215'
Chain Length - 15'
Chain Size - 1/4"
Chain Type - G4
Rope Length - 200'
Rope Size - 1/2"
Rope Type - 3 Strand
Shackle - 5/16" D
*Sold as an Individual
|
372.62 |
|