|
Specialty Inflatable Fender Ball - 24" Diameter - Black
Inflatable Ball Fender 24” diameter sphere.
Features:
Made from Black 41oz Industrial Grade Material
Special tie-down points RF welded (NOT glued)
Custom-formed D-Rings SS
24” diameter ball
All made in the USA
Crafted in Milwaukee
All seams have extra welded PVC strips
Great for Big Boats, Sail Boats, Yachts, or any boat you want to keep safe
All welded seams no gluing
Extra seam tape on the welds for added strength
Fills with M3100 air pump or any tube pump
Easy to deflate and roll up for Maximum storage
Direct UV-printed logos
*IMPORTANT: Not to be used for towing or to stop a boat a high speeds or as a flotation ice!
|
249.76 |
|
|
Specialty Inflatable Fender Ball - 36" Diameter - Black
Inflatable Ball Fender 36” diameter sphere.
Features:
Made from Black 41oz Industrial Grade Material
Special tie-down points RF welded (NOT glued)
Custom-formed D-Rings SS
36” diameter ball
All made in the USA
Crafted in Milwaukee
All seams have extra welded PVC strips
Great for Big Boats, Sail Boats, Yachts, or any boat you want to keep safe
All welded seams no gluing
Extra seam tape on the welds for added strength
Fills with M3100 air pump or any tube pump
Easy to deflate and roll up for Maximum storage
Direct UV-printed logos
*IMPORTANT: Not to be used for towing or to stop a boat a high speeds or as a flotation device!
|
283.50 |
|
|
Specialty Inflatable Fender - 12" x 30" - Black
Inflatable Fender 12" diameter x 30" long cylinder.
Features:
Made from Black 41oz Industrial Grade Material
Special tie-down points RF welded (NOT glued)
Custom-formed D-Rings SS
12” diameter x 30” long
All made in the USA
Crafted in Milwaukee
All seams have extra welded PVC strips
Great for Big Boats, Sail Boats, Yachts, or any boat you want to keep safe
All welded seams no gluing
Extra seam tape on the welds for added strength
Fills with M3100 air pump or any tube pump
Easy to deflate and roll up for Maximum storage
Direct UV-printed logos
*IMPORTANT: Not to be used for towing or to stop a boat a high speeds or as a flotation device!
|
195.76 |
|
|
Specialty Inflatable Fender - 18" x 36" - Black
Inflatable Fender 18" diameter x 36" long cylinder.
Features:
Made from Black 41oz Industrial Grade Material
Special tie-down points RF welded (NOT glued)
Custom-formed D-Rings SS
18” diameter x 36” long
All made in the USA
Crafted in Milwaukee
All seams have extra welded PVC strips
Great for Big Boats, Sail Boats, Yachts, or any boat you want to keep safe
All welded seams no gluing
Extra seam tape on the welds for added strength
Fills with M3100 air pump or any tube pump
Easy to deflate and roll up for Maximum storage
Direct UV-printed logos
*IMPORTANT: Not to be used for towing or to stop a boat a high speeds or as a flotation device!
|
209.26 |
|
|
Specialty Inflatable Fender - 18" x 42" - Black
Inflatable Fender 18" diameter x 42" long cylinder.
Features:
Made from black 41oz Industrial Grade Material
Special tie-down points RF welded (NOT glued)
Custom-formed D-Rings SS
18” diameter x 42” long
All made in the USA
Crafted in Milwaukee
All seams have extra welded PVC strips
Great for Big Boats, Sail Boats, Yachts, or any boat you want to keep safe
All welded seams no gluing
Extra seam tape on the welds for added strength
Fills with M3100 air pump or any tube pump
Easy to deflate and roll up for Maximum storage
Direct UV-printed logos
*IMPORTANT: Not to be used for towing or to stop a boat a high speeds or as a flotation device!
|
216.00 |
|
|
Brick Fat Sac Ballast Bag - 155lbs - Black
The compact size of the FatSac Fat Brick makes it small enough to stash anywhere, but it offers enough capacity to balance the weight distribution within any type of boat.
If you constantly struggle to keep the weight in your boat balanced, the FatSac Fat Brick is for you. Have a lot of batteries or a big stereo that makes the boat always lean to one side? This 155lb. ballast bag is compact and makes it easy to adjust the weight in the boat from side to side so that you always have a clean wake with no wash.
Offset the driver's weight when Slalom Skiing with this 155 lbs. square ballast bag.
Features:
Highest Quality HeyTex layered materials.
UV resistant
Double welded seams with seam tape for highest quality and strength.
Each sac comes with the fittings needed to use the over the side supa pump
Just switch out the fittings to plumb the bags into an automatic fill/empty system
Offered in Black or Gray (other colors available for additional cost)
Sacs can be personalized with custom printing (for an additional cost)
Sit, Stand and walk across full sacs with no issue.
Size: 155 lbs. = 16" x 16" x 16"
In the Box:
Ballast Bag
Two Valves/Caps (W749 x 1 and W730 x 1)
*Sold as an Individual
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
165.10 |
|
|
Tube Fat Sac Ballast Bag - 370lbs - Black
Thanks to its long and narrow shape, the FatSac Tube Sac is perfect for adding 370lbs of hidden ballast.
The FatSac Tube Sac is the perfect shape for ski locker found in the floor of most boat. It's longer and narrow profile also make it incredibly versatile for use in other areas of the boat, such as the bow walk-way, or in storage compartments and under seats. There's a reason this is one of our most popular bags; it's incredibly versatile, and will fit in a number of locations depending on where you need ballast.
Whether you need additional weight up front for wakeboarding or if you need additional ballast under seats in the midship for surfing, the Tube Sac is the perfect size to fit in most ski and wakeboard boats.
Features:
Tube Sac
62 x 16 x 10 inches
In the Box:
Ballast Bag
Three Valves/Caps (W731 x 1, W749 x 1 and W730 x 1)
*Sold as an Individual
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
178.34 |
|
|
Floor Fat Sac Ballast Bag - 500lbs - Black
Designed to sit on the floor of v-drive boats, the FatSac 500 lb. Floor ballast bag adds a significant amount of weight to the middle of the boat to help create a more sizable wake for your riding pleasure.
Needing that extra bit of wake to build your wake up or the rear lockers full of gear and need to place ballast elsewhere? A floor ballast bag is a great option for adding a good amount of weight in v-drive boats.
Thanks to the superior construction, sitting, standing or walking on the bag is perfectly fine so don’t worry about it being in the middle of the boat.
Features:
500 Pound Floor Fat Sac
40 x 40 x 8.5 inches
In the Box:
Ballast Bag
Two Valves/Caps (W749 x 1 and W730 x 1)
*Sold as an Individual
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
247.64 |
|
|
Floor Fat Sac Ballast Bag - 800lbs - Black
Designed to sit on the floor of v-drive boats, the FatSac 800 lb. Floor ballast bag adds a significant amount of weight to the middle of the boat to help create a more sizable wake for your riding pleasure.
Needing that extra bit of wake to build your wake up or the rear lockers full of gear and need to place ballast elsewhere? A floor ballast bag is a great option for adding a good amount of weight in v-drive boats.
Thanks to the superior construction, sitting, standing or walking on the bag is perfectly fine so don’t worry about it being in the middle of the boat.
Features:
800 Pound Floor Fat Sac
42 x 40 x 13 inches
In the Box:
Ballast Bag
Two Valves/Caps (W749 x 1 and W730 x 1)
*Sold as an Individual
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
289.21 |
|
|
Big B™ Fender - 8" x 20" - Black Onyx
The versatile Big B™ fender incorporates a center rope tube that allows end-to-end line passage. Big B™ inflatable vinyl fenders feature a seamless construction with molded ribs to minimize roll. Big B™’s are made from the highest quality marine-grade vinyl with a high gloss finish.
Features:
Rubber football needle valve for easy inflation and long life
The 3/4" diameter center hole accepts up to 5/8" diameter rope to secure the fender
Fenders can be hung vertically or horizontally with a single line
End-to-end rope passage - horizontal hanging is useful for protection against pilings and tidal change areas
Matches boat gel coat with patented color-matching process
Tough marine-grade vinyl tolerates the harsh elements
Specifications:
Diameter x Length: 8 x 20 inches
Boat Size: 25 to 35 ft.
Color: Black Onyx
|
53.68 |
|
|
Big B™ Fender - 10" x 26" - Black Onyx
The versatile Big B™ fender incorporates a center rope tube that allows end-to-end line passage. Big B™ inflatable vinyl fenders feature a seamless construction with molded ribs to minimize roll. Big B™’s are made from the highest quality marine-grade vinyl with a high gloss finish.
Features:
Rubber football needle valve for easy inflation and long life
The 3/4" diameter center hole accepts up to 5/8" diameter rope to secure the fender
Fenders can be hung vertically or horizontally with a single line
End-to-end rope passage - horizontal hanging is useful for protection against pilings and tidal change areas
Matches boat gel coat with patented color-matching process
Tough marine-grade vinyl tolerates the harsh elements
Specifications:
Diameter x Length: 10 x 26 inches
Boat Size: 35 to 50 ft.
Color: Black Onyx
|
94.75 |
|
|
Big B™ Fender - 12" x 34" - Black Onyx
The versatile Big B™ fender incorporates a center rope tube that allows end-to-end line passage. Big B™ inflatable vinyl fenders feature a seamless construction with molded ribs to minimize roll. Big B™’s are made from the highest quality marine-grade vinyl with a high gloss finish.
Features:
Rubber football needle valve for easy inflation and long life
The 3/4" diameter center hole accepts up to 5/8" diameter rope to secure the fender
Fenders can be hung vertically or horizontally with a single line
End-to-end rope passage - horizontal hanging is useful for protection against pilings and tidal change areas
Matches boat gel coat with patented color-matching process
Tough marine-grade vinyl tolerates the harsh elements
Specifications:
Diameter x Length: 12 x 34 inches
Boat Size: 50 to 60 ft.
Color: Black Onyx
|
133.60 |
|
|
42" x 24" Rafter Inflatable Fender
Solstice Rafter Inflatable Fenders feature innovative high-pressure technology to offer a new, optimized way to protect your boat when docking, and increase stability when rafting up to other boats. Designed with double reinforced, heat & pressure welded PVC that is stronger than the market standard and built to perform against all marine environments including UV rays, chemicals, oil, and petrol exposure. Incredibly easy to deflate, fold, and store back in the included bag - perfect to store in small spaces on boats.
Features:
Inflatable high-pressure boat fender used for docking and/or rafting up to other boats
Acts as a protective barrier between two boats to prevent any scraping, bumping, or denting
2 stainless steel D-ring tie-off points
High-pressure HR valve for quick inflate/deflate
Deflates to become compact & portable for easy storage
Technical Specifications:
Recommended pressure - 1.5-3 PSI
Carry bag dimensions - 27.5" x 9" x 9"
Folded size - 21" x 6" x 5"
In the Box:
Fender
Water-resistant storage bag
(2) integrated D-rings
Repair kit
|
165.59 |
|
|
Super Duty Inflatable Yacht Fender - 18" x 29" - Black
The Super Duty inflatable yacht fenders are built to last. We use 30% heavier material and 15% higher tensile strength than the competition. Our fenders are also 50% more abrasion resistant and twice as tear resistant than the best-selling competitive brand. Five-year limited warranty.
Features:
Webbing exceeds 4500 lbs. tensile strength
Heavy-duty spring actuated valve with quarter turn lock for easy inflation or deflation
Welded seams have no glue to harden or breakdown
Yacht Size: Up to 75'
|
269.71 |
|
|
Super Duty Inflatable Yacht Fender - 18" x 42" - Black
The Super Duty inflatable yacht fenders are built to last. We use 30% heavier material and 15% higher tensile strength than the competition. Our fenders are also 50% more abrasion resistant and twice as tear resistant than the best-selling competitive brand. Five-year limited warranty.
Features:
Webbing exceeds 4500 lbs. tensile strength
Heavy-duty spring actuated valve with quarter turn lock for easy inflation or deflation
Welded seams have no glue to harden or breakdown
Yacht Size: Up to 75'
|
323.86 |
|