|
MB-75 Flush Mount Kit
For flush-mounting to a flat surface, such as a control panel.
Compatible Devices:
M424
M502
M504
M506
M602
M604
M605
M802
MA500TR
|
35.92 |
|
|
MB-69 Flush Mount Kit
Specifically used for flush-mounting Icom's M45, M402, M302 or the M422 to a flat surface.
Compatible Devices:
M402
M304
M422
|
35.92 |
|
|
Flush Mount Kit for M330
Flush Mounting kit for M330 VHF Radio
|
29.93 |
|
|
Flush Mount Kit
Icom MB-132 Stainless Steel Flush Mount Kit for the Icom M424, M506
|
35.92 |
|
|
MBF7 Flush Mount Kit
Flush mount kit for a IC-M510 marine transceiver.
Compatible With:
IC-M510
IC-M510E
*Sold as an Individual
|
45.31 |
|
|
PP4409 PowerPod Pre-Cut f/Garmin STRIKER™ 7sv/7dv 7" CHIRP Fishfinder (Requires Flush Mount Kit Garmin Part)
PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
All PowerPods Include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
|
322.90 |
|
|
PP4409 PowerPod Pre-Cut for Garmin STRIKER™ 7" 7sv/7dv (Requires Flush Mount Kit Garmin Part) - Carbon Black
PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
All PowerPods Include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
|
322.90 |
|
|
PP4410 PowerPod Pre-Cut for Garmin STRIKER™ 5dv (Requires Flush Mount Kit Garmin Part)
PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
All PowerPods Include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
|
322.90 |
|
|
PP4410 PowerPod Pre-Cut for Garmin STRIKER™ 5dv (Requires Flush Mount Kit Garmin Part) - Carbon Black
PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
All PowerPods Include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
|
322.90 |
|
|
Signature Series Flush Mount Kits - 7.7" Speakers
Designed with sleek and minimalistic design aesthetics, the Fusion Signature Series flush mount kits allow you to install Signature Series 3i classic-style speakers with a premium near-flat finish – mounting profile no thicker than 2 mm [0.08”].
The flush mount kit features a non-intrusive mounting system for easy installation. Simply place the kit into the cutout, then place the speaker (sold separately) into the kit, tighten the screws, and the tabs will tighten against the panel, keeping it in place without the need to create any screw holes in your boat.
Compatible With:
Signature Series 3i 7.7" Classic Speakers
Technical Specifications:
Mounting Diameter Clearance - 8.46" (21.5 cm)
Mounting Depth Clearance - 4.41" (1.2 cm)
In the Box:
Two (2) flush mount baskets
Two (2) grilles
Mounting template
Documentation
*Sold as a Pair
|
81.56 |
|
|
Signature Series Flush Mount Kits - 6.5" Speakers
Designed with sleek and minimalistic design aesthetics, the Fusion Signature Series flush mount kits allow you to install Signature Series 3i classic-style speakers with a premium near-flat finish – mounting profile no thicker than 2 mm [0.08”].
The flush mount kit features a non-intrusive mounting system for easy installation. Simply place the kit into the cutout, then place the speaker (sold separately) into the kit, tighten the screws, and the tabs will tighten against the panel, keeping it in place without the need to create any screw holes in your boat.
Compatible With:
Signature Series 3i 6.5" Classic Speakers
Technical Specifications:
Mounting Diameter Clearance - 7.68" (19.5 cm)
Mounting Depth Clearance - 4.17" (1.06 cm)
In the Box:
Two (2) flush mount baskets
Two (2) grilles
Mounting template
Documentation
*Sold as a Pair
|
73.40 |
|
|
Flush Mount Kit for echo™ 200, 500c & 550c
Looking for a sleeker installation for your echo 200, 500c or 550c? A flush mount kit allows you to easily position your device against most flat surfaces in your boat.
The kit includes a flush mount gasket, necessary hardware and instructions.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
9.89 |
|
|
Flush Mount Kit for echoMAP™ 4Xdv Series
Make mounting your echoMAP™ sonar device quickly and easier than ever when you use the Garmin echoMAP™ Sonar 4Xdv Flush Mount Kit. Perfect for any boat, this Flush Mount Kit allows you to easily position your echoMAP™ device in the most ideal place on your power or sail boat.
The Garmin echoMAP™ Sonar 4Xdv Flush Mount Kit works on most flat surfaces to ensure a successful and reliable installation. For the easiest way to prepare your echoMAP™ system for use, you'll love the detailed mounting instructions and the easy to install style offered.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
17.99 |
|
|
SVS880 Series Flush Mount Kit
Aluminum bezel attaches to rear of the unit and allows the unit to be easily mounted to a console from the front.
The bezel also provides the perfect cut out template for the installer.
|
48.00 |
|
|
Flush Mount Kit for echoMAP™ 5Xdv Series
Garmin's echoMAP™ device can sit in the most accessible place for your boat when you use the echoMAP™ Sonar 5Xdv Series Flush Mount Kit. Making installation easier than ever, this mount comes with additional instructions that will get you installing and using your echoMAP™ in just minutes. The Flush Mount Kit can be set up almost anywhere on your boat, ensuring that you can see your echoMAP™ from any direction you prefer.
Compatible Devices:
echoMAP™ 5Xdv Series
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
13.49 |
|