|
3.3lb Grapnel Anchor Kit with Storage Bag
Anchor a kayak, canoe, or small boat worry-free with the YakGear 3.3-pound (1.5kg) Grapnel Anchor Kit. This 3.3-pound (1.5 kg) galvanized steel anchor features four 6-inch tines that fold out of the way while stored for space maximization and release when ready for use. The heavy head design of the anchor creates less wait time until the anchor is fully submerged into the anchoring surface in deeper and faster-moving water. 30 feet of 3/16-inch black nylon anchor rope and a storage ditty bag are included.
Features:
3.3 lb. galvanized steel Grapnel Anchor
Four folding 6" tines for easy storage
Locks in an open or closed position
A heavy head allows for easier anchoring
30 ft. nylon diamond braid rope
Storage bag included
1-year warranty
Note: It is recommended to use 3 times the depth of the water as the length of rope in calm waters and 4-5 times the depth of the water as the length of rope in choppy waters or windy conditions
|
22.40 |
|
|
1.5lb Grapnel Anchor Kit with Storage Bag
Catch the big fish while anchored with the little anchor kit with the complete YakGear 1.5-pound Grapnel Anchor Kit. This 1.5-pound (.7 kg) galvanized steel anchor features four 3.5-inch tines that fold out of the way while stored for space maximization and release when ready for use. While it may seem small, a 1.5 lb. anchor is a more than adequate weight for kayaks and canoes in rivers, lakes, and slower-moving water. Includes 30 feet of 3/16-inch black nylon diamond braid anchor rope and a storage bag.
Features:
1.5 lb. galvanized steel Grapnel Anchor
Four folding 3.5 in. tines for easy storage
Locks in open or closed position
30 ft. nylon diamond braid rope
Storage bag included
1-year warranty
Note: It is recommended to use 3 times the depth of the water as the length of rope in calm waters and 4-5 times the depth of the water as the length of rope in choppy waters or windy conditions
|
20.00 |
|
|
Kayak Grapnel Anchor Kit
Grapnel anchor will hold your kayak, PWC, canoe or float tube in mud, sand, gravel and rock. Includes a 3 lb. silver grapnel anchor with 1/4" diameter x 20' of black diamond braided MFP anchor rope and mesh bag with drawstring.
|
17.46 |
|
|
3.5lb Grapnel Anchor System
This 3.5lb anchor will hold your PWC, canoe, dinghy, kayak, or float tube in sand, mud, gravel, and rock. Includes 25' of rope, marker buoy, giant snap hook, anchor and a durable nylon storage case that protects your boat from scratches.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
28.57 |
|
|
PWC Anchor Kit - 3lb
3 lb Grappling Folding Anchor
Features:
Includes storage bag
For small boats, sailboats, personal watercraft, inflatables, and canoes
For sand, rock, mud, and gravel bottoms
Easy to deploy or stow away
|
39.49 |
|
|
March 0155-0159-0500 3.625 Impeller Mag Assy W/Rytn
|
329.68 |
|
|
March MDX-3 1/2" Ports Pump W/115V Mtr
|
281.78 |
|
|
Voyager 3-Person Inflatable Boat Kit with Oars & Pump
Inflatable fishing boat ideal for protected waters and up to three people. Four-chamber, double hull, heavy-duty construction with I-beam flooring. Accepts up to 2 HP motors with optional #30050 motor mount (not included). Integrated with bow handle, grab lines, and swivel oar locks.
Features:
600 lbs weight capacity
4 chamber, double hull heavy-duty construction with I-beam flooring
Inflatable bolster seat(s) included
Fishing rod holder
Handle and grab lines
Swivel oar locks
In the Box:
Boat
Oars
Pump
|
70.93 |
|
|
Sunskiff 3-Person Inflatable Boat Kit with Oars & Pump
The ideal inflatable boat for pools, lakes, and more!
Features:
525 lbs max capacity
Heavy-duty PVC construction
Grab lines
Integrated oar locks
In the Box:
Boat
Oars
Pump
|
45.70 |
|
|
Kayak Angler Starter Crate Kit
Milk crates provide interior storage areas on the deck of kayaks, canoes, or paddleboards. It is a simple solution to an ever-persistent problem in a sport plagued by a lack of storage space. The YakGear Black Milk Crate comes with the YakGear logo in a standard 13 in. x 13 in. milk crate size, fitting most kayak tank wells or decks. Having milk crates for sale also prevents kayak anglers from being forced to steal beverage distributor crates from stores or shell out major cash on a glorified milk crate storage system.
The crates are honeycomb-designed to allow customization with all YakGear crate rigging accessories, including the Build A Crate Series of accessories. In addition, this kit comes with 2 x Build A Crate single rod holders and 1 x YakGear accessory pouch.
About the Accessory Pouch
The YakGear Accessory Pouch is an easily installed storage pouch that allows storage, protection, and organization for paddling and fishing accessories while on the water. The storage pouch is designed to secure tackle trays, extra lines, pliers, fish grips, and other accessories while keeping them organized at the same time. The 7-inch tall x 12-inch wide gear storage pouch will hold up to a 9-inch x 11-inch tackle box and other accessories up to 11 inches in width or 9 inches in height.
The adjustable top elastic strap combined with the side elastic web strap provides the flexibility necessary to accommodate accessories of varying sizes while maintaining a snug grasp. This gear storage pouch can be mounted anywhere that it is needed, including on a milk crate, the side of a cooler, or on the inside gunwales of the kayak or canoe, for needed extra storage.
The accessory pouch comes complete with stainless steel installation hardware, installation instructions, and rigging tips from YakGear. About the Build a Crate Single Rod Holders: Milk crates, buckets, and coolers provide interior storage areas on the deck of a kayak, canoe, or paddleboard; however, these storage methods do not have any exterior storage or rod holder features.
Rig the exterior of a preferred storage area with the YakGear Build A Crate Kits to fully maximize all storage possibilities. This single rod holder kit provides any paddler with a rod or anchor holder that easily attaches to any storage container with inside access. This allows the paddler to efficiently take advantage of storage space in a sport where extra gear is at a premium and free space is hard to find.
The rod holder is 12 inches long and features trigger cutouts to properly rest and secure reels. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Included:
1 x YakGear Black Milk Crate
1 x YakGear Accessory Pouch
2 x YakGear Build A Crate Single Rod Holders
Features:
1-year warranty
|
34.15 |
|
|
Deluxe Anchor Trolley with Pulleys
The Deluxe Anchor Trolley will help users stop being victims of changing winds and currents while fishing in an anchored position. The YakGear Deluxe Anchor Trolley Kit allows the deployment of any anchor, drift chute, or stake-out pole before judging the current and wind while still remaining in a favorable fishing position. Without a trolley, users are limited to anchoring where it is reachable, causing the boat to swing back and forth. Mounted just off of the gunwale of any kayak or canoe, the deluxe trolley kit uses a nylon pulley system to select a desirable position anywhere from bow to stern, then maintains the positioning through the use of a 2-5/16-inch mini zig-zag cleat.
The deluxe system uses Harken pulleys to seamlessly pass trolley rope from bow to stern without the standard rubbing of rope along slightly less smooth pad eyes. The mounted pulleys are raised off of the boat enough to eliminate any unnecessary rubbing or scratching of the boat.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone and anchors are recommended but not included.
Features:
Deluxe anchor trolley system with Harken pulleys
It allows the bow of your vessel to turn into the current for a smoother experience
A mini zig-zag cleat is included, assisting in maintaining stable positioning
Installation instructions and hardware are included
The kit also includes 30 ft. of rope
1-year warranty
|
28.00 |
|
|
3lb Economy Folding Anchor Kit
Sea-Dog's Economy Folding Anchor Kit includes everything users need to get started. It comes complete with the popular 3.5 lb. folding anchor, 20' of 3/16" line, and a handy mesh bag.
Features:
Constructed of hot-dipped galvanized iron with forged flukes
Specifications:
Size of Hole for Anchor Rope: 1/2 in.
Included Anchor Line: 20 ft.
Weight: 3.5 lbs
|
22.84 |
|
|
Premium RV Storage Bag
The Camco All-Purpose RV Storage Bag securely holds RV equipment, such as items for stabilization, electrical, and more. Made of heavy-duty material, the bag includes a padded interior.
Features:
Heavy-duty cloth material (padded interior provides additional protection)
The bag features (1) an internal zippered compartment, (2) inside pockets, and an exterior double zipper
Easy to carry, includes (2) top carrying handles for easy transportation
Specifications:
Bag Dimensions (W x H x D): 25.5 x 12 x 13 inches
|
20.35 |
|
|
T-Top Storage Bag
Stores life vests & other boating essentials
Features:
Safe velcro closure for instant emergency access to life jackets
Vented top allows for quick drying of wet gear
2 mesh side storage pockets, 1 mesh bottom storage pocket and 1 large dry zippered pouch to store phones, wallets, glasses and other valuables
Mounts under a T-top with four 2" wide adjustable snap buckle straps
Strong 600 denier polyester construction
Main Compartment holds 4 life jackets or other boating gear
Extra large 24" x 6" dry zipper pocket
25" wide x 20" deep x 6" high
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
86.23 |
|
|
Draw Bar Storage Bag
Black
Don't bang your shins!
Store the draw bar and keep your vehicle clean
Remove the draw bar and hitch ball from your vehicle to prevent banging your shin. Store it conveniently in your tow vehicle. Bag is padded with a strong zipper closure. Will easily hold a 2" receiver drawbar and hitch ball with a 2" rise or a 4" drop. Made of strong 600 Denier polyester with PVC backing. Includes a carry handle and a pocket to hold hitch pin.
Size: 15"L x 6"H x 4"D
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.12 |
|