|
5lb Mushroom Anchor
The YakGear 5-pound Mushroom Anchor is perfect for anchoring kayaks, canoes, stand-up paddleboards, and even jon boats in muddy, sandy, or weeded bottoms. The high-level holding strength provides additional security with a wide-area mushroom cap with drains in the base.
Shaped like an inverted mushroom, the head becomes buried in the soft seabed and will normally sink to the point where it has displaced its own weight in the seabed material. Its one-piece cast iron construction combined with a tough vinyl coating ensures long-lasting, dependable use. The anchor is very popular for fishermen and race buoys.
Features:
5 lb. inverted mushroom-shaped anchor
Cast iron and vinyl coated in black
1-year warranty
|
13.60 |
|
|
1.5lb Grapnel Anchor Kit with Storage Bag
Catch the big fish while anchored with the little anchor kit with the complete YakGear 1.5-pound Grapnel Anchor Kit. This 1.5-pound (.7 kg) galvanized steel anchor features four 3.5-inch tines that fold out of the way while stored for space maximization and release when ready for use. While it may seem small, a 1.5 lb. anchor is a more than adequate weight for kayaks and canoes in rivers, lakes, and slower-moving water. Includes 30 feet of 3/16-inch black nylon diamond braid anchor rope and a storage bag.
Features:
1.5 lb. galvanized steel Grapnel Anchor
Four folding 3.5 in. tines for easy storage
Locks in open or closed position
30 ft. nylon diamond braid rope
Storage bag included
1-year warranty
Note: It is recommended to use 3 times the depth of the water as the length of rope in calm waters and 4-5 times the depth of the water as the length of rope in choppy waters or windy conditions
|
20.00 |
|
|
3.5lb Grapnel Anchor System
This 3.5lb anchor will hold your PWC, canoe, dinghy, kayak, or float tube in sand, mud, gravel, and rock. Includes 25' of rope, marker buoy, giant snap hook, anchor and a durable nylon storage case that protects your boat from scratches.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
28.57 |
|
|
Molded Stick Clip Kit - 3/4" Clips
Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. the 3/4 in. clip will fit paddles from 5/8 inch to 7/8 inch and is YakGear’s preferred method of securing the YakGear - Yakstick Mud Anchor.
This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Molded rubber paddle clips allow for easy paddle or mud anchor storage
Two solid rubber-molded paddle clips are provided
3/4 in. clips fit paddles and mud anchors ranging from 5/8 to 7/8 in.
Installation instructions and hardware are included
1-year warranty
Specifications:
Size: 3/4 in. clips
|
8.00 |
|
|
Guardian G-5 Anchor - 2.5lb
Guardian anchors benefit from years of Fortress research and development, offering excellent quality, performance, and economy. These anchors are manufactured from the same corrosion-resistant, high-tensile aluminum magnesium alloy as Fortress, which makes them stronger and lighter than competitive steel anchors.
With Guardian anchors, several Fortress machining steps and extra features, such as anodizing and adjustable fluke angles, are eliminated. The Guardian Anchor is limited to one, single, 32-degree angle, which will work for most common sea bottoms. The result is a high-performance anchor that is engineered for fast setting and strong holding power, and a very affordable alternative to those heavy, rust-prone steel anchors.
As strong as steel, but only half the weight, Guardian anchors are second only to Fortress FX model in holding power tests. They make an excellent spare or storm anchor for your boat or yacht.
*Made in the U.S.A.
Features:
Fortress high-tech aluminum alloy
Rust-proof and non-magnetic materials
Easily assembles and disassembles for convenient storage
No failing welded pieces
Easy to manage weight
Replaceable parts
Technical Specifications:
Size of Boat - 12' to 16' (4 to 5 M)
Style - Fluke
Material - Aluminum magnesium alloy
Working Load - 350lbs (159kg)
Shank Length - 19" (483mm)
Fluke Length - 11" (279mm)
Stock Length - 16" (406mm)
Weight - 2.5lbs (1.1kg)
*Sold as an Individual
|
52.31 |
|
|
Guardian G-11 Anchor - 5LB
Guardian anchors benefit from years of Fortress research and development, offering excellent quality, performance, and economy. These anchors are manufactured from the same corrosion-resistant, high-tensile aluminum magnesium alloy as Fortress, which makes them stronger and lighter than competitive steel anchors.
With Guardian anchors, several Fortress machining steps and extra features, such as anodizing and adjustable fluke angles, are eliminated. The Guardian Anchor is limited to one, single, 32-degree angle, which will work for most common sea bottoms. The result is a high-performance anchor that is engineered for fast setting and strong holding power, and a very affordable alternative to those heavy, rust-prone steel anchors.
As strong as steel, but only half the weight, Guardian anchors are second only to Fortress FX model in holding power tests. They make an excellent spare or storm anchor for your boat or yacht.
*Made in the U.S.A.
Features:
Fortress high-tech aluminum alloy
Rust-proof and non-magnetic materials
Easily assembles and disassembles for convenient storage
No failing welded pieces
Easy to manage weight
Replaceable parts
Technical Specifications:
Size of Boat - 23' to 27' (7 to 8 M)
Style - Fluke
Material - Aluminum magnesium alloy
Working Load - 750lbs (340kg)
Shank Length - 25" (635mm)
Fluke Length - 15" (381mm)
Stock Length - 20" (508mm)
Weight - 5lbs (2.26kg)
*Sold as an Individual
|
92.12 |
|
|
Anchor Kit
797
50' Premium Nylon Line
1.5lb Folding Anchor
Watertight Buoyant Container - doubles as a bailer
Nylon Snap Hook, for easy attachment to vessel
For still water use.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
31.13 |
|
|
Guardian G-125 Anchor - 65lb
Guardian anchors benefit from years of Fortress research and development, offering excellent quality, performance, and economy. These anchors are manufactured from the same corrosion-resistant, high-tensile aluminum magnesium alloy as Fortress, which makes them stronger and lighter than competitive steel anchors.
With Guardian anchors, several Fortress machining steps and extra features, such as anodizing and adjustable fluke angles, are eliminated. The Guardian Anchor is limited to one, single, 32-degree angle, which will work for most common sea bottoms. The result is a high-performance anchor that is engineered for fast setting and strong holding power, and a very affordable alternative to those heavy, rust-prone steel anchors.
As strong as steel, but only half the weight, Guardian anchors are second only to Fortress FX model in holding power tests. They make an excellent spare or storm anchor for your boat or yacht.
*Made in the U.S.A.
Features:
Fortress high-tech aluminum alloy
Rust-proof and non-magnetic materials
Easily assembles and disassembles for convenient storage
No failing welded pieces
Easy to manage weight
Replaceable parts
Technical Specifications:
Size of Boat - 63' to 72' (19 to 22 M)
Style - Fluke
Material - Aluminum magnesium alloy
Working Load - 6,000lbs (2,722kg)
Shank Length - 53" (1,356mm)
Fluke Length - 31" (787mm)
Stock Length - 43" (1,092mm)
Weight - 65lbs (29.3kg)
*Sold as an Individual
|
1109.02 |
|
|
Ampco Pumps P2SX101694 Belleville Washers
|
43.74 |
|
|
By now, the skipper in your life has probably dropped a few hints about holiday gifts. Was it the note left on the coffee pot about Articulated ABS Barrel Hinge foldable Aluminum Tubing? At first glance, one would have thought that the message was a reminder about being out of coffee filters. Then it comes back to you that there was a conversation in the car about GemLock Assembled Folding Struts.
Foldable aluminum tubing is one of the hottest trends in stainless steel hardware for marine canvas and solar panel frames. The tubing offers versatility in styling, high quality, and ease of use. https://www.clrmarine.com/462m4/manufacturers/g/gemini-marine.html
Back to your captain's holiday gift list. Was there a subtle hint, while you both were swimming off the boat, and your skipper showed concern that the transom ladder seemed a little short by a few steps? She would find getting out of the lake sooooo much easier if she didn't have to reach her foot up so far to the lowest step. She had also mentioned a discussion with other boat captains about the Extend Your Step, an easy-to-use boat boarding ladder extension. Several of her sailing buddies already have them and raved about the ease and portability.
.
All of the products mentioned above are available at CLR Marine.com. How confident are the folks at CLR Marine about the Extend Your Step regarding ease in boarding and extending the ladder length? This product reflects the confidence and integrity of CLR Marine's owner, Chuck Reed. He invented the Extend Your Step! When shopping for the extending ladder, be sure to check out the Extend Your Step Three – a longer and non-moving version of the Extend Your Step! https://www.clrmarine.com/Boat-Boarding-Ladder-Extension
It's possibly time for your captain to give the best seat in the house – on your boat- an upgrade. There is no better place to watch the glint of the sun on the waves than in a stern perch seat. Stern rail seats are now available for older model boats, even pre-1993, and the seats are removable. https://www.clrmarine.com/sternperch-seats.html
Stocking Stuffers
Floatable key rings. If you are old enough to have keys, then you are old enough to lose keys. House keys, boat keys, car keys – when these fall into the drink and aren't retrievable, your boat outing takes a turn for the worse. Car key fobs are expensive to replace. Neon colored strong straps or carabiner clips offer added security against key loss.
DryCASE Smartphone Case
The DryCASE waterproof cell phone case keeps your electronics protected, whether surfing, paddle boarding, or canoeing. The DryCASE uses vacuum seal technology to ensure a watertight seal every time. Best of all, you'll still be able to use your touch screen to text or make calls, and the crystal clear covering makes taking pictures a cinch. When you purchase the DryCASE you will also receive a small hand pump, neoprene armband, and a lanyard $36.92. https://www.clrmarine.com/m4/45443—drycase-smartphone-case.html
RAM Mount AQUA BOX Medium
RAM AQUA BOX® cases provide sealed enclosure and protection for your handheld devices. The clear, touch through screen allows you to view your electronics and use their function keys while in place. There is even a place for a small lock to serve as a theft deterrent. The AMPS hole pattern on the back of the box allows this enclosure to be attached to many RAM mounting bases and kits. Ideally suited to Motorcycles and ATV's, the AQUA BOX keeps your portable devices safe, dry, and accessible $36.49.
Scotty 130 Paddle Safety Leash
Paddles, rods, nets, gaffs, and many other items can be secured while in use with the Scotty Safety Leash. Features include two extra strong Scotty 1009 swivel snaps; super-strong Flex Coil cord allows for maximum unrestricted movement and stretches to approx. 6'. Unit Includes two figure eight securing straps $11.99. https://www.clrmarine.com/m4/37811--scotty-130-paddle-safety-leash-black.html
Gifts under $30.00
Don't forget about covers for your water toys.
The Dallas Manufacturing Co – Pedal Boat Cover will keep your pedal boat dry, dirt free, and protected from the sun when not in use. Features include 150 Denier Silver Polyester, fits both 3 and 5 Person Pedal Boats and is backed by a one year warranty $13.19. https://www.clrmarine.com/m4/36879—dallas-manufacturing-co-pedal-boat-polyester-cover.html
Mustang Lil' Legends 70 Youth Vest - Fluorescent Yellow-Green/Gray
Have guests arrived on your boat with a small young family member who needs a life vest? The Mustang Lil's Legends is a quality youth vest, and it never hurts to have a spare on board. It fits a child 50-90 pounds $21.59.
https://www.clrmarine.com/m4/49897—mustang-lil-legends-70-youth-vest-50-90lbs-fluorescent-yellow-green-gray.html
Be good—Santa's watching. Stay healthy. Fair Winds. Smooth sailing.
To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com
______________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com
|
|
|
Deluxe Anchor Trolley with Pulleys
The Deluxe Anchor Trolley will help users stop being victims of changing winds and currents while fishing in an anchored position. The YakGear Deluxe Anchor Trolley Kit allows the deployment of any anchor, drift chute, or stake-out pole before judging the current and wind while still remaining in a favorable fishing position. Without a trolley, users are limited to anchoring where it is reachable, causing the boat to swing back and forth. Mounted just off of the gunwale of any kayak or canoe, the deluxe trolley kit uses a nylon pulley system to select a desirable position anywhere from bow to stern, then maintains the positioning through the use of a 2-5/16-inch mini zig-zag cleat.
The deluxe system uses Harken pulleys to seamlessly pass trolley rope from bow to stern without the standard rubbing of rope along slightly less smooth pad eyes. The mounted pulleys are raised off of the boat enough to eliminate any unnecessary rubbing or scratching of the boat.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone and anchors are recommended but not included.
Features:
Deluxe anchor trolley system with Harken pulleys
It allows the bow of your vessel to turn into the current for a smoother experience
A mini zig-zag cleat is included, assisting in maintaining stable positioning
Installation instructions and hardware are included
The kit also includes 30 ft. of rope
1-year warranty
|
28.00 |
|
|
3.3lb Grapnel Anchor Kit with Storage Bag
Anchor a kayak, canoe, or small boat worry-free with the YakGear 3.3-pound (1.5kg) Grapnel Anchor Kit. This 3.3-pound (1.5 kg) galvanized steel anchor features four 6-inch tines that fold out of the way while stored for space maximization and release when ready for use. The heavy head design of the anchor creates less wait time until the anchor is fully submerged into the anchoring surface in deeper and faster-moving water. 30 feet of 3/16-inch black nylon anchor rope and a storage ditty bag are included.
Features:
3.3 lb. galvanized steel Grapnel Anchor
Four folding 6" tines for easy storage
Locks in an open or closed position
A heavy head allows for easier anchoring
30 ft. nylon diamond braid rope
Storage bag included
1-year warranty
Note: It is recommended to use 3 times the depth of the water as the length of rope in calm waters and 4-5 times the depth of the water as the length of rope in choppy waters or windy conditions
|
22.40 |
|
|
Anchor Cleat Kit
The YakGear Anchor Cleat Kit comes with a 4-inch nylon anchor cleat for kayaks, canoes, and small boats. This anchor cleat provides a stable access point to secure anchors, drift chutes, bow lines, and safety lines.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Installation instructions and hardware are included
1-year warranty
Specifications:
Length: 4 inches
|
5.60 |
|
|
Kayak Angler Starter Crate Kit
Milk crates provide interior storage areas on the deck of kayaks, canoes, or paddleboards. It is a simple solution to an ever-persistent problem in a sport plagued by a lack of storage space. The YakGear Black Milk Crate comes with the YakGear logo in a standard 13 in. x 13 in. milk crate size, fitting most kayak tank wells or decks. Having milk crates for sale also prevents kayak anglers from being forced to steal beverage distributor crates from stores or shell out major cash on a glorified milk crate storage system.
The crates are honeycomb-designed to allow customization with all YakGear crate rigging accessories, including the Build A Crate Series of accessories. In addition, this kit comes with 2 x Build A Crate single rod holders and 1 x YakGear accessory pouch.
About the Accessory Pouch
The YakGear Accessory Pouch is an easily installed storage pouch that allows storage, protection, and organization for paddling and fishing accessories while on the water. The storage pouch is designed to secure tackle trays, extra lines, pliers, fish grips, and other accessories while keeping them organized at the same time. The 7-inch tall x 12-inch wide gear storage pouch will hold up to a 9-inch x 11-inch tackle box and other accessories up to 11 inches in width or 9 inches in height.
The adjustable top elastic strap combined with the side elastic web strap provides the flexibility necessary to accommodate accessories of varying sizes while maintaining a snug grasp. This gear storage pouch can be mounted anywhere that it is needed, including on a milk crate, the side of a cooler, or on the inside gunwales of the kayak or canoe, for needed extra storage.
The accessory pouch comes complete with stainless steel installation hardware, installation instructions, and rigging tips from YakGear. About the Build a Crate Single Rod Holders: Milk crates, buckets, and coolers provide interior storage areas on the deck of a kayak, canoe, or paddleboard; however, these storage methods do not have any exterior storage or rod holder features.
Rig the exterior of a preferred storage area with the YakGear Build A Crate Kits to fully maximize all storage possibilities. This single rod holder kit provides any paddler with a rod or anchor holder that easily attaches to any storage container with inside access. This allows the paddler to efficiently take advantage of storage space in a sport where extra gear is at a premium and free space is hard to find.
The rod holder is 12 inches long and features trigger cutouts to properly rest and secure reels. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Included:
1 x YakGear Black Milk Crate
1 x YakGear Accessory Pouch
2 x YakGear Build A Crate Single Rod Holders
Features:
1-year warranty
|
34.15 |
|
|
2.2lb Bruce Anchor
Coastal anchoring can be tough with anything other than the YakGear 2.2lb (1kg) Bruce Anchor. This 2.2-pound (1kg) galvanized steel plow anchor is the preferred anchor choice for coastal and near-shore fishermen.
The plow-shaped design allows the anchor to dig easily into the sand, silt, and muddy bottoms.
Features:
2.2lb galvanized steel Bruce Anchor
Self-orienting
1-year warranty
Note: It is recommended to use at least 3 times the depth of water as the length of the anchor rope in calm waters and 4 to 5 times the depth of the water in choppy waters or windy conditions.
|
10.40 |
|