|
Universal Scupper Plug Kit
Solve the problem of unknown sizes of lost scupper plugs with the YakGear Universal Scupper Plug Kit. Scupper plugs act as a sealant to the self-bailing scupper holes to keep extra water out of the cockpit of your sit-on-top kayak.
These plugs fit any scupper hole with a circumference ranging from 3/4 inch to 1-1/2 inch. Orders will be in increments of 4 pieces.
Features:
Universal scupper plugs fit any scupper hole ranging from 3/4 to 1-1/2 in.
Each kit contains 4 scupper plugs
Instructions included
1-year warranty
|
10.40 |
|
|
Universal Drain Plug Kit
Add or replace the drain plugs on any kayak with the YakGear Universal Drain Plug Kit. This kit provides the two most used kayak and paddleboat drain plugs with a wide thread (red washer) and a fine thread (black washer) to accommodate most paddlers. Both drain plugs come with a top flange.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Universal drain plug kit to add or replace old drain plugs
One wide thread drain plug and one fine thread drain plug provided
Installation instructions and hardware are included
1-year warranty
|
8.00 |
|
|
Molded Stick Clip Kit - 3/4" Clips
Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. the 3/4 in. clip will fit paddles from 5/8 inch to 7/8 inch and is YakGear’s preferred method of securing the YakGear - Yakstick Mud Anchor.
This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Molded rubber paddle clips allow for easy paddle or mud anchor storage
Two solid rubber-molded paddle clips are provided
3/4 in. clips fit paddles and mud anchors ranging from 5/8 to 7/8 in.
Installation instructions and hardware are included
1-year warranty
Specifications:
Size: 3/4 in. clips
|
8.00 |
|
|
Zig Zag Cleat Kit
This YakGear Zig Zag Cleat Kit comes with a 3-1/2-inch nylon zigzag cleat for kayaks, canoes, and small boats. The zigzag cleat provides a stable access point to secure anchors, drift chutes, bow lines, and safety lines. Zig-zag cleats require no knots to be tied, as the pressure from the lace-back design keeps all anchors in place using up to 3/8-inch rope.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Lace back design allows all anchors to stay in place using up to 3/8 in. rope
Installation instructions and hardware are included
1-year warranty
Specifications:
Zig Zag Cleat Size: 3-1/2 in.
|
7.20 |
|
|
Universal AC Plug - Black
No need to cut, strip or splice wires! Mount in an easy-to-reach location for safe AC power cord connection. Watertight and UV resistant cover.
Features:
Converts plug holder to an AC inlet for ProMariner engineered chargers
No cutting, stripping, or rewiring of AC power cord
Watertight and UV resistant cover
Easy to reach safe AC power cord connections
Stainless steel mounting screws included
|
9.58 |
|
|
Universal AC Plug - White
No need to cut, strip or splice wires! Mount in an easy-to-reach location for safe AC power cord connection. Watertight and UV resistant cover.
Features:
Converts plug holder to an AC inlet for ProMariner engineered chargers
No cutting, stripping, or rewiring of AC power cord
Watertight and UV resistant cover
Easy to reach safe AC power cord connections
Stainless steel mounting screws included
|
9.58 |
|
|
Universal Fuel Line Kit - 3/8" Diameter x 6' Length with Sprayless Connectors
This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. This kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Also, the kit includes an award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thread sealant). It includes these fittings: tank fitting 8838TM6; tank end hose fitting 8838HF6.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6 & tank end hose fitting 8838HF6
Multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
Universal for any engines and tanks
Tank Side: Universal Sprayless Quick-Connect
Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
*It does not include an engine fitting
|
43.42 |
|
|
Universal Speaker Connector Kit f/22-18 AWG Wire Gauge
Marine speakers are equipped with male disconnects in two sizes (.250 tab for positive and either .188 tab or .110 tab for negative), depending on speaker manufacturer. Universal Speaker Connector Kits include two .250 tabs, two .188 tabs and two .110 tabs female heat shrink disconnects that enable installation of two speakers regardless of manufacturer. Female heat shrink disconnects are the optimal connector for speaker installation as they provide a sealed connection against the marine environment.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
7.40 |
|
|
Universal Speaker Connector Kit f/16-14 AWG Wire Gauge
Marine speakers are equipped with male disconnects in two sizes (.250 tab for positive and either .188 tab or .110 tab for negative), depending on speaker manufacturer. Universal Speaker Connector Kits include two .250 tabs, two .188 tabs and two .110 tabs female heat shrink disconnects that enable installation of two speakers regardless of manufacturer. Female heat shrink disconnects are the optimal connector for speaker installation as they provide a sealed connection against the marine environment.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
7.40 |
|
|
Heat Shrink Universal Speaker Connector Kit f/22-18/16-14 - Assorted 90 Piece
Ancor's universal speaker connector kits include all the connectors required to install speakers regardless of manufacturer. Heat shrink disconnects provide a sealed connection for the harsh marine environment.
90 Piece Kit Includes:
22-18 AWG: (10) .250 tab, (10) .187 tab, (10) .110 tab
16-14 AWG: (20) .250 tab, (20) .187 tab, (20) .110 tab
Reusable compact case
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
92.17 |
|
|
Universal Fuel Line Kit - 3/8" Diameter x 6' Length with Sprayless Connectors & Fuel Demand Valve
This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thread sealant) are included as well.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6 & tank end hose fitting 8838HF6
Also, includes a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine
Tank Side: Universal Sprayless Quick-Connect
Universal for any Engines and Tanks
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
*It does not include an engine fitting
|
62.05 |
|
|
Universal Fuel Line Kit - 3/8" Diameter x 12' Length with Sprayless Connectors
This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 12-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thread sealant) is in the kit as well.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6 & tank end hose fitting 8838HF6
Tank Side: Universal Sprayless Quick-Connect
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance.
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
Universal for any engines and tanks
*It does not include an engine fitting
|
63.92 |
|
|
Universal Fuel Line Kit - 3/8" Diameter x 12' Length with Sprayless Connectors & Fuel Demand Valve
This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 12-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thread sealant) are in the kit as well.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6 & tank end hose fitting 8838HF6
It also includes a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
Tank Side: Universal Sprayless Quick-Connect
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
Universal for any engines and tanks
*It does not include an engine fitting
|
83.93 |
|
|
SAE Power Cable Power Plug Kit
This SAE-type polarized electrical plug kit is a two-prong plug and socket connector set. 14-gauge lead wire with bullet-type contact pins.
Features:
Proudly constructed in the USA of injection molded nylon and polypropylene
Includes:
Two plugs
Four heat-shrink tubes
Four butt connectors (allowing users to customize the set per application)
Specifications:
Length: 6 in.
Volts: 12-24
Maximum Amps: 20A @ 12VDC
Wire Guage: 14 AWM
Weight: 0.08 lb.
|
8.87 |
|
|
Universal Mounting Bracket Kit
Our unique, three-sided bracket design features three precise angles that take into account the majority of the trailers' diverse tie-down tab designs.The three-sided bracket enables the BoatBuckle G2 to be moved several different ways,making it truly universal.
|
12.88 |
|