|
The Mast Mount is designed to fit multiple specific manufacturers Radomes and Satellite Antennas. It is constructed from lightweight aluminum and is powder-coasted white for a durable finish. For fast and accurate installation Edson designed mounting feet that can be properly secure to a wide range of mast profiles. One Mounting Plate is required to complete the Edson Vision SeriesMast Mount System.
Features:
Rugged Design
Marine-grade aluminum construction
Powder-coated white
Rivets included for mast attachment
Easy installation
First all modular system - extremely versatile
Simple selection and installation
Requires Vision Mounting Plate to install radar or sat dome antenna
Mast Mount Radar Platform
For sailboats and trawlers
Swivel Feet fit most masts
Rivets included
|
484.20 |
|
|
Wing w/Light Arm Receiver
Edson's 68800 Wing Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Vertical Mounts while providing two wings to mount adding space for GPS Antennas and other electronics. Edson's Wing Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.
Specifications:
Base Mount and Mounting Plate sold separately
For Vertical Mounts
37" Wide
|
372.07 |
|
|
Light Arm Receiver f/Vertical Mounts
Edson's 68790 Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Vertical Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.
Base Mount and Mounting Plate sold separately.
|
51.30 |
|
|
Vision Series Universal Mounting Plate - 15" Diameter with No Holes
With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's Vision Series Universal Mounting Plate is 15" diameter without pre-drilled holes. You drill your own holes to fit any antenna or dome.
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
130.36 |
|
|
GPS Mount with Light Extension Adapter
Edson's 67400 GPS Mount with Light Extension Adapter is specifically designed for Edson's Vision Series Light Arms. The powder coated stainless steel GPS Mount allows you to add a GPS antenna to your Light Arm. The GPS Mount also has an extension to attach your navigation anchor/steaming light.
*Shown with optional Perko Anchor/Steaming Light. Must be ordered separately.*
The 67400 GPS Mount with Light Extension Adapter requires an Edson Light Arm that is secured to a Vision Series Base Mount with a Light Arm Receiver and Radar Mounting Plate. Order Edson's Light Arm, Light Arm Receiver, Base Mount and Mounting Plate separately.
|
184.50 |
|
|
Vision Series Univeral Mounting Plate - 10-5/8" Diameter with No Holes
With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's Vision Series Universal Mounting Plate is 10-5/8" diameter without pre-drilled holes. You drill your own holes to fit any antenna or dome.
Mounting Plates are required to complete an Edson Vision Series Mounting Series.
Order Base Mount separately.
|
130.36 |
|
|
Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow.
Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available.
All-new sleek, modern design.
First all modular system - extremely versatile.
Easy to select and install for any radar, dome, light or camera combination.
Easy to add accessories.
Upgradable for future additions and modifications.
Powder coated aluminum construction
Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer.
The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."
See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )
Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.
SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686
|
|
|
Vision Series Mounting Plate for Simrad HALO™ Open Array
Edson's Vision Series Mounting Plate allows the Simrad HALO™ to be mounted on a hard top or any of Edson's heavy-duty mounts. If you wish to use one of the Edson Vision Series Mounts, available in single, double, and triple mount configurations, the HALO™-specific mounting plate fits right into Edson's existing family.
The Vision Series Mounting Plate is made from marine-grade aluminum and finished with a white powder coat. This American-crafted mount is built to handle all of your adventures on the water, with style.
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mount sold separately.
|
89.99 |
|
|
Light Arm Receiver for Aft Angled Mounts
The Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Aft Angle Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
51.30 |
|
|
Wedge kit for 0-4 degree angle adjustment - 7" diameter
While underway, the bow of your powerboat tends to ride at an elevated angle, causing your radar to be angled. With Edson's 67550 0-4 degree Wedge for Round Base Vision Mounts the elevated bow will be offset aligning your radar to see better. Edson's 0-4 Degree Wedge requires an Edson Mounting Plate and an Edson Vision Series Mount.
Specifications:
Base Mount and Mounting Plate sold separately
**NOTE: ONLY COMPATIBLE with Vertical Round Base Vision Series Mounts (68930, 68900, 68770, 68910, 68730, 68740)**
|
104.40 |
|
|
Light Arm for Radar Domes and Sat Domes
Edson's 68650 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Radar Dome and Satellite Dome.
Light Arm extends 14" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights.
Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical).
Specifications:
Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately)
Base mounts sold separately
|
194.40 |
|
|
Light Arm for Open Array Radars
Edson's 68660 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Open Array Radar.
Light Arm extends 28" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights.
Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical).
Specifications:
Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately)
Base mounts sold separately
|
209.70 |
|
|
Wing Light Arm Receiver for Aft Angled Mounts
Edson's 68640 Wing Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Aft Angled Mounts while providing two wings to mount adding space for GPS Antennas and other electronics.
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
410.40 |
|
|
Furuno & Sitex Mounting Plate
With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68510 Vision Series Mounting Plate is designed for both SiTex 2kw, 4kw Radar Domes (T-2041, MDS-9, MDS-8, MDS-1, T-941, T-921, T-761, T-760) and Furuno 2kw, 4kw Radars (15", 18”, 19” and 24" Domes and 3.5’ & 4' Open Arrays).
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
142.20 |
|
|
Garmin 4ft Open Array Mounting Plate
With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68560 Vision Series Mounting Plate is designed for Garmin 4ft Open Array Radars (GMR 424 xHD2, GMR 624 xHD2, GMR 1224 xHD2, GMR 2524 xHD2, GRM Fantom 4).
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
142.20 |
|