|
EBSN 15 Amp Electric Switch f/Bilge Pump
Features
Operation managed by microcontroller.
Advanced digital filter to distinguish the presence of water.
Extended power supply range.
Remote indication of operation status by led or remote control panel (optional).
Manual remote pump switch-on by button or remote control panel (optional).
Signal for prolonged bilge pump switch on (if led or remote control panel is installed).
Protection against excessive battery rundown.
Switch-on/switch-off delay to avoid false switch-on/switch-off cycling of the pump caused by the roll of the boat.
Functioning over a wide range of environmental temperatures.
Resin-coated watertight casing.
Easy installation.
|
124.57 |
|
|
EBSN 10 Amp Electric Switch f/Bilge Pump
Features
Operation managed by microcontroller.
Advanced digital filter to distinguish the presence of water.
Extended power supply range.
Remote indication of operation status by led or remote control panel (optional).
Manual remote pump switch-on by button or remote control panel (optional).
Signal for prolonged bilge pump switch on (if led or remote control panel is installed).
Protection against excessive battery rundown.
Switch-on/switch-off delay to avoid false switch-on/switch-off cycling of the pump caused by the roll of the boat.
Functioning over a wide range of environmental temperatures.
Resin-coated watertight casing.
Easy installation.
|
109.78 |
|
|
EBSN 20 Amp Electric Switch f/Bilge Pump
Features
Operation managed by microcontroller.
Advanced digital filter to distinguish the presence of water.
Extended power supply range.
Remote indication of operation status by led or remote control panel (optional).
Manual remote pump switch-on by button or remote control panel (optional).
Signal for prolonged bilge pump switch on (if led or remote control panel is installed).
Protection against excessive battery rundown.
Switch-on/switch-off delay to avoid false switch-on/switch-off cycling of the pump caused by the roll of the boat.
Functioning over a wide range of environmental temperatures.
Resin-coated watertight casing.
Easy installation.
|
136.79 |
|
|
Ultima Bilge Pump
UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port.
All version are delivered with a removable check valve.
The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel.
CE-Approved
Features:
Compact, all-in-one unit
Integrated Ultima Switch sensing right into the pump body
No Mercury
Removable clip on basket design
Removable impeller cover allows for easy clean out
3-wire device can be run in auto or manual override mode
No tools needed for maintenance
Extremely energy efficient
Water-cooled motor for long service intervals
Meets the international standard, ISO 8849 marine
Pump Body: ABS
Shaft Seal: Lip Seal
Shaft: Stainless steel
Voltage: 12 V DC
Capacity 3 ft (0.9 m) head (13.6 V): 32 l/min - 500 GPH
Capacity straight (13.6 V): 38 l/min - 600 GPH
Amperage: 2.5 A
Fuse Size: 5 A
Connection: 3/4"
Length:142 mm - 6"
Width:82 mm - 3.2"
Height:105 mm - 4.1"
Weight:0.66 kg - 23.3 oz.
|
74.08 |
|
|
Ultima Bilge Pump
UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port.
All version are delivered with a removable check valve.
The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel.
CE-Approved
Features:
Compact, all-in-one unit
Integrated Ultima Switch sensing right into the pump body
No Mercury
Removable clip on basket design
Removable impeller cover allows for easy clean out
3-wire device can be run in auto or manual override mode
No tools needed for maintenance
Extremely energy efficient
Water-cooled motor for long service intervals
Meets the international standard, ISO 8849 marine
Pump Body: ABS
Shaft Seal: Lip Seal
Shaft: Stainless steel
Voltage: 12 V DC
Capacity 3 ft (0.9 m) head (13.6 V): 38 l/min - 600 GPH
Capacity straight (13.6 V): 51 l/min - 800 GPH
Amperage: 3 A
Fuse Size: 5 A
Connection: 3/4"
Length:142 mm - 6"
Width:82 mm - 3.2"
Height:105 mm - 4.1"
Weight:0.66 kg - 23.3 oz.
|
81.48 |
|
|
Ultima Bilge Pump
UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port.
All version are delivered with a removable check valve.
The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge
control panel.
CE-Approved
Features:
Compact, all-in-one unit
Integrated Ultima Switch sensing right into the pump body
No Mercury
Removable clip on basket design
Removable impeller cover allows for easy clean out
3-wire device can be run in auto or manual override mode
No tools needed for maintenance
Extremely energy efficient
Water-cooled motor for long service intervals
Pump Body: ABS
Shaft Seal: Lip Seal
Shaft: Stainless steel (SS2343)
Voltage: 12 V DC
Capacity 3 ft (0.9 m) head (13.6 V): 44 l/min - 700 GPH
Capacity straight (13.6 V): 64 l/min - 1000 GPH
Amperage: 3.2 A
Fuse Size: 5 A
Connection: 3/4"
Length:142 mm - 6"
Width:82 mm - 3.2"
Height:105 mm - 4.1"
Weight:0.66 kg - 23.3 oz.
|
88.88 |
|
|
Ultima Bilge Pump
UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port. For UltimaBilge 1250GPH we include threaded 1.1/4" & 1.1/8" discharge port.
All version are delivered with a removable check valve.
The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel.
CE-Approved
Features:
Compact, all-in-one unit
Integrated Ultima Switch sensing right into the pump body
No Mercury
Removable clip on basket design
Removable impeller cover allows for easy clean out
3-wire device can be run in auto or manual override mode
No tools needed for maintenance
Extremely energy efficient
Water-cooled motor for long service intervals
Pump Body: ABS
Shaft Seal: Lip Seal
Shaft: Stainless steel (SS2343)
Voltage: 12 V DC
Capacity 3 ft (0.9 m) head (13.6 V): 51 l/min - 800 GPH
Capacity straight (13.6 V): 79 l/min - 1250 GPH
Amperage: 3 A
Fuse Size: 5 A
Connection: 1-1/8" and 1-1/4"
Length:142 mm - 6"
Width:82 mm - 3.2"
Height:117 mm - 4.6"
Weight:0.66 kg - 23.3 oz.
|
91.85 |
|
|
ECO-Switch
The Rule ECO-Switch is an ecologically sound automatic bilge pump control control switch. Featuring a non-mercury design, the pump operates with simple air pressure. As water rises in the bilge, air rises in the air tube that is attached to switch. This air pressure activates the switch which controls your pump. There are no moving internal parts, all wiring is out of the water, and there are no submerged electrical connections at all. Offering complete reliability and outstanding performance, the Rule ECO-Switch offers a viable alternative to traditional float switches.
WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
69.11 |
|
|
Mate USA M164-064-15 Reversible Electronic Pump with Bronze Gears
UP6-RK
6.9 GPM Reversible Diesel/Oil Transfer Kit
Volt: 12V & 24V
Fuse: 10 amp
Ports: 1/2"
Gpm: 6.9
Psi: 29
Diesel: Yes
Oil: Yes
Diesel/oil transfer kit with electronic control. During priming the speed of the pump increases and the system automatically shuts off in case of empty tank and short circuit. Being equipped with a reverse-flow function system, this kit is particularly indicated for tank balancing operations on board.
|
695.63 |
|
|
Mate USA M164-700-15 Electronic Diesel and Oil Pump Helical Bronze Gears
UP2/E-BR
2.6 GPM Electronic Diesel and Oil Pump
Volt: 12V & 24V
Gpm: 2.6
Psi: 29
Diesel: Yes
Oil: Yes
This Mate USA 2.6 GPM Self-priming Automatic electric pump,12/24V, with constant pressure electronic control for the transfer of diesel and oil. Helical bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. The pump is supplied with a “High-Speed” setting for Diesel transfer and it's set to interact with a SCS control panel allowing the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.
|
403.65 |
|
|
Mate USA M164-801-15
12/24V ELECTRIC WASHDOWN PUMP
DP3/E
43.5 Psi Washdown Pump
Volt: 12V & 24V
Gpm: 3.7
Psi: 43.5
Fresh water: Yes
Salt water: Yes
The Mate USA DP3/E has 43.5 Psi and is a complete kit including an electronic self-priming electric pump with electronic control. Equipped with helical PTFE gears, in-line filter, nickel plated brass body and check valve. With 33ft stretchable coil hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.
|
455.63 |
|
|
Mate USA M164-710-15 Electronic Diesel and Oil Pump with Helical Bronze Gears
UP3/E-BR
4 GPM Electronic Diesel and Oil Pump
Volt: 12V & 24V
Gpm: 4
Psi: 36
Diesel: Yes
Oil: Yes
This Mate USA 4 GPM Self-priming Automatic electric pump,12/24V, with constant pressure electronic control for the transfer of diesel and oil. Helical bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. The pump is supplied with a “High-Speed” setting for Diesel transfer and it's set to interact with a SCS control panel allowing the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.
|
597.19 |
|
|
Mate USA M164-821-15 WASHDOWN PUMP
12/24VDC ELECTRIC WASHDOWN PUMP
DP9/E
58 Psi Washdown Pump
Volt: 12V & 24V
Gpm: 3.7
Psi: 58
Fresh water: Yes
Salt water: Yes
This Mate USA pump has 58 Psi and is a complete kit including an electronic self-priming electric pump with electronic control. Equipped with helical PTFE gears, in-line filter, nickel plated brass body and check valve. With 33ft stretchable coil hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.
|
590.63 |
|
|
Mate USA M164-841-15 ELECTRIC WASHDOWN PUMP
12/24VDC WASHDOWN PUMP
DP12/E
72.5 Psi Washdown Pump
Volt: 12V & 24V
Gpm: 4
Psi: 72.5
Fresh water: Yes
Salt water: Yes
This Mate USA pump has 72.5 Psi and is a complete kit including an electronic self-priming electric pump with electronic control. Equipped with helical PTFE gears, in-line filter, nickel plated brass body and check valve. With 33ft stretchable coil hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.
|
688.13 |
|
|
Mate USA M164-720-15 Electronic Diesel and Oil Pump with Helical Bronze Gears
UP6/E-BR
6.9 GPM Electronic Diesel and Oil Pump
Volt: 12V & 24V
Gpm: 6.9
Psi: 36
Diesel: Yes
Oil: Yes
This Mate USA 6.9 GPM Self-priming Automatic electric pump,12/24V, with constant pressure electronic control for the transfer of diesel and oil. Helical bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. The pump is supplied with a “High-Speed” setting for Diesel transfer and it's set to interact with a SCS control panel allowing the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.
|
962.10 |
|