|
Integrated Rudder Feedback Units
OC15SUK27E
Typically one of the most complex and time consuming aspects of autopilot installation is fitting the rudder feedback unit and ensuring that the geometry matches the full range of rudder movement. The solution is an integrated rudder feedback unit that directly mounts to the drive unit itself.
The standard RFB unit's (OC15SUK27A - OC15SUK27E) are dedicated to a particular manufacturer.Both types are attached directly to the drive unit for simple installation.
|
251.72 |
|
|
Integrated Rudder Feedback Units
OC15SUK27D
Typically one of the most complex and time consuming aspects of autopilot installation is fitting the rudder feedback unit and ensuring that the geometry matches the full range of rudder movement. The solution is an integrated rudder feedback unit that directly mounts to the drive unit itself.
The standard RFB unit's (OC15SUK27A - OC15SUK27E) are dedicated to a particular manufacturer.Both types are attached directly to the drive unit for simple installation.
|
251.72 |
|
|
Integrated Rudder Feedback Units
OC15SUK27B
Typically one of the most complex and time consuming aspects of autopilot installation is fitting the rudder feedback unit and ensuring that the geometry matches the full range of rudder movement. The solution is an integrated rudder feedback unit that directly mounts to the drive unit itself.
The standard RFB unit's (OC15SUK27A - OC15SUK27E) are dedicated to a particular manufacturer.Both types are attached directly to the drive unit for simple installation.
|
251.72 |
|
|
PP4410 PowerPod Pre-Cut for Garmin STRIKER™ 5dv (Requires Flush Mount Kit Garmin Part)
PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
All PowerPods Include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
|
322.90 |
|
|
PP4410 PowerPod Pre-Cut for Garmin STRIKER™ 5dv (Requires Flush Mount Kit Garmin Part) - Carbon Black
PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
All PowerPods Include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
|
322.90 |
|
|
Adapter Cable To Connect GT30 T/M to P729/P79
Connect a Garmin GT30 transom mount scanning transducer and an Airmar P72 or P79 in-hull mount traditional transducer to a compatible echoMAP™ chartplotter/sonar combo.
This adapter cable allows the echoMAP to continue to display water depth from the in-hull transducer in instances when the transom mount transducer loses depth reading due to cavitation.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
26.99 |
|
|
Eagle 9 with TripleShot T/M Transducer & Discover OnBoard Chart
Eagle® was born to make fishing as simple and enjoyable as possible. Easy to use and quick to install, this model features a TripleShot™ HD Transducer with FishReveal technology and autotuning for a quick and optimal setup. An IPS screen provides higher resolution and visibility from all angles. This model also comes bundled with high-resolution C-MAP® Discover OnBoard™ charts for the US and Canada.
Easy to Use Sonar
TripleShot HD
Have the best chance of finding fish with underwater views to the side and below the boat, all with one transducer. TripleShot™ HD features the fish-finding capability of wide-angle high CHIRP sonar and high-resolution images of fish-holding structures from SideScan and DownScan Imaging™.
FishReveal™
Take the guesswork out of fish identification with FishReveal, combining DownScan with CHIRP for unparalleled target separation and identification.
Autotuning
Simple autotuning sonar gives users the optimal settings from the start, so users don’t have to spend time trying to find them.
Detailed Charting
C-MAP Discover OnBoard US/Canada Bundle
Spend more time fishing and less time searching, with high-resolution C-MAP® Discover OnBoard charts included for the US and Canada. With Eagle, users have all the details needed to discover and navigate to the best fishing spots, faster.
Genesis Live
Know the local waters better than anyone with the ability to create custom ½-foot contour maps of the local lake or uncharted water in real-time.
Designed for Fishing
IPS Screens
See clearly wherever users go with an IPS screen, offering improved resolution, clarity, and visibility, even with polarized sunglasses in direct sunlight.
Connector System
Set up in an instant with Eagle’s improved twist-locking connector, promising easy installation and removal every time.
One-Year Warranty
Lowrance's priority is to give users superior quality products and a stress-free time on the water. Enjoy the feeling of fishing with peace of mind, thanks to Lowrance's one-year warranty guarantee.
Features:
Enhanced TripleShot™ HD Transducer with Autotuning Sonar
C-MAP® Discover OnBoard™ charts for the US and Canada
IPS screen, viewable from all angles, even in polarized glasses
Reliable twist-lock connector system for easy installation in any boat or kayak
SD card slot for software updates, Genesis Live recording, and charting add-ons.
See fish hiding in cover with FishReveal™ mode
Increase contrast and viewability with imaging color palettes
What’s in the Box?
Eagle 9 Display
TripleShot HD Transducer
Tripleshot Bracket
C-MAP Discover OnBoard™ charts for the US and Canada
Power Cable, with fuse and connectors
Eagle 9 Bracket and mounting hardware
Spotlight Feature Icons:
CHIRP
DownScan
FishReveal
IPS Screens
Autotuning Sonar
|
899.99 |
|
|
Eagle 7 with SplitShot T/M Transducer & Inland Charts
Eagle® was born to make fishing as simple and enjoyable as possible. Easy to use and quick to install, this model features a SplitShot™ HD Transducer with FishReveal technology and autotuning for a quick and optimal setup. An IPS screen provides higher resolution and visibility from all angles. This model also comes pre-loaded with high-resolution C-MAP® inland charts for the US, with coverage of over 17,000+ American lakes.
Easy to Use Sonar
SplitShot™ HD
Get the best underwater views below the boat with SplitShot HD, featuring the fish-finding capability of wide-angle high-CHIRP sonar and the high-resolution images of fish-holding structures from DownScan Imaging™.
FishReveal™
Take the guesswork out of fish identification with FishReveal, combining DownScan with CHIRP for unparalleled target separation and identification.
Autotuning
Simple autotuning sonar gives users the optimal settings from the start, so users don’t have to spend time trying to find them.
Detailed Charting
C-MAP Embedded Inland
Spend more time fishing and less time searching with pre-loaded high-resolution C-MAP® Embedded inland charts for the US. Get coverage of over 17,000+ American lakes. With Eagle, users have all the details needed to discover and navigate to the best fishing spots, faster.
Genesis Live
Know the local waters better than anyone with the ability to create custom ½-foot contour maps of the local lake or uncharted water in real-time.
Designed for Fishing
IPS Screens
See clearly wherever the user goes with an IPS screen, offering improved resolution, clarity, and visibility, even with polarized sunglasses in direct sunlight.
Connector System
Set up in an instant with Eagle’s improved twist-locking connector, promising easy installation and removal every time.
One-Year Warranty
Lowrance's priority is to give users superior quality products and a stress-free time on the water. Enjoy the feeling of fishing with peace of mind, thanks to Lowrance's one-year warranty guarantee.
Features:
Enhanced SplitShot™ HD Transducer with Autotuning Sonar
C-MAP® inland charts for the US, feat. Genesis® Live
IPS screen, viewable from all angles, even in polarized glasses
Reliable twist-lock connector system for easy installation in any boat or kayak
SD card slot for software updates, Genesis Live recording, and charting add-ons
See fish hiding in cover with FishReveal™ mode
Increase contrast and viewability with Imaging color palettes
What’s in the Box?
Eagle 7 Display
SplitShot HD Transducer
Bullet/SplitShot™ Transom Bracket
Power Cable, with fuse and connectors
Eagle 7 Bracket and mounting hardware
Spotlight Feature Icons:
CHIRP
DownScan
FishReveal
IPS Screens
Autotuning Sonar
|
599.99 |
|
|
Vacuflush S & T Pump Bushing Kit 385310242
|
31.31 |
|
|
NMEA 2000 Cable & T Connector Connection Kit for Siren 3 Pro
Optimize the connectivity of your Connected Boat® system, allowing you to monitor engine data, water, fuel and waste tanks, and more! The NMEA 2000 Connection Kit includes a 2-meter connection cable and a 3-Way Connection "T" – everything you'll need to hook up to the NMEA 2000 data system 'backbone'.
*Compatible with the Siren 3 Pro Only
|
46.16 |
|
|
XT 250A Singleft Alternator, MC Regulator, T Sensors, Dualpul, Kit
Kit Includes: XT-SF-250-DV Alternator, MC-618 Regulator, Temperature Sensors & Mounting Hardware
XT Series Alternator: 250A, 12V, Spindle Mount (Single Foot), 1-2in, Dual Deep Vee Pulley, Case Ground
1" Motorola-Style Mounting; Typical for Westerbeke, Lehman, Hino & Pathfinder Engines
2" Delco-Style Mounting; Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based Engines
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1473.13 |
|
|
NavPilot 711C-M with Octopus Pump 12ci to 23ci
Kick back, relax and let NavPilot steer you to your destination
Furuno’s NavPilot is a revolutionary autopilot with a sunlight viewable display designed for a variety of vessels. It utilizes a self-learning and adaptive software algorithm, and plays the ultimate role in course-keeping capability. NavPilot dynamically adjusts essential parameters during navigation, such as vessel speed, trim, draught, tide and wind effects, dead band, weather and more. These parameters are stored in system memory and continuously optimized to make the NavPilot more versatile.
The NavPilot 711C-M package includes 1.6L pumpset for boats with multiple-cylinder steering systems.
Integrate your helm with NavPilot's FishHunter mode
FishHunter mode is a unique feature of FURUNO’s NavPilot series. Find a fish target with your FURUNO sonar/sounder or bird target with your FURUNO radar and feed it to the NavPilot The NavPilot will activate the FishHunter mode to perform square, zigzag, circle, orbit, spiral or figure-eight maneuvers around the specified target at a user selected distance. This feature can also be used for Man Overboard (MOB).
RRU (Rudder Reference Unit) required to enable Fish Hunter mode on NavPiot 711C/OB models
Beautiful & bright color LCD display
The new NavPilot 711C features a color day/night graphic display, offering much better sunlight viewability during the day while not affecting your night vision when the sun goes down.
Sabiki Mode for NavPilot 711C
With the brand new SABIKI mode, your NAVpilot 711C has just become even more capable than before. SABIKI mode lets the autopilot control while you are drifting astern so you can focus on fishing instead of steering. Moving astern at a slow pace, the SABIKI mode is uniquely tailored for sabiki fishing, jigging and bottom fishing. Sabiki fishing requires a bit of technique, and no matter if you just started or have considerable experience, the SABIKI mode will help you catch the bait fish needed for the big catch. And the best thing, there is no need to install additional hardware or sensors. Just perform the automated software upgrade, and the SABIKI mode will be added to your NAVpilot 711C. SABIKI mode is only available on vessels with outboard engines.
In the Box:
FAP7011C - Control Unit
FAP7002 - Processor Unit for NAVpilot 700 Series
FAP6112 - Rudder Reference Unit for NAVpilot
PG700 - Fluxgate Magnetic Sensor With Enhanced Stability By A Solid-State Rate Gyroscope, w/ 6M Cable
PUMPOCT16-12 - 1,600CC/MIN OCTOPUS PUMP, 12V, 1.6 Cubic Inches per second (For Ram sizes from 12-23 Cubic Inches in volume)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3514.50 |
|
|
GRF™ 10 - Rudder Feedback Sensor
Compatible Devices
Pair this sensor with the GHP 12™ to provide rudder position feedback and to detect and avoid rudder stops while sailing or boating.
The GRF 10 uses a magnetic sensor to relay position information, eliminating friction that causes other types of sensors to wear out. The arm of the GRF 10 is connected to the rudder of the boat and relays position information through the sensor to the mariner so they know where the rudder is - giving them an added peace of mind when starting from a stopped position, docking, launching or moving at slow speeds.
Additionally, the GRF 10, allows sailors to:
Know where the rudder is positioned without having to look back
Make smoother maneuvers and avoid over-compensating
Save undue wear and stress on their autopilot system by eliminating force on the rudder when it's already stopped left or right.
Specifications:
6.5" Cable
Max cable length 49'
Compass safe distance 3.2'
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
317.99 |
|
|
Autopilot Pump Type 2 - Adjustable Reversing Pump - 12V up to 18 CI Cylinder
Now with ORB Port Connection manifold
Reversing pumps are used when hydraulic steering is fitted on boats up to 65 feet L.O.A. (depending on rudder torque). The pumps are switched on by the automatic pilot and make a steering correction to left or right determined by the direction of rotation of the pump motor. The motors are of the permanent magnetic type and reversing direction is accomplished by reversing the motor input current.
The pump has only three moving parts and requires no complicated check valves to prevent rudder movement when de-energized. Output flow is completely adjustable to 50% of rated flow allowing the pump output to be adjusted precisely to the volume of steering cylinder fitted. The pump is exceptionally reliable and delivers more than twice the hydraulic output per watt of input than gear pumps manufactured by competitors.
Motors are heavy duty, a full 85mm in diameter with long brushes and sealed ball bearings for long service life. The molded rubber mounting foot can be rotated to allow the pump to be mounted on any surface.
A useful range of accessories can be used to enhance the pump by incorporating added valves and solid state FET switching. The valves mount directly to the pump body. The FET switch mounts adjacent to the pump. No other autopilot pump made offers such advantages.
Benefits of the Octopus Reversing Pumps
Piston pump technology giving higher efficiency and accuracy Fewer moving parts giving increased reliability Variable flow rate to make sure the pump is matched as accurately as possible to the manual steering system Professional cut off valves for simple servicing.
Features:
Average Current 4-6 amps
Max Current 19amps
12vDC
Cylinder Size: 11-22ci
Flow Rate(adjustable): 600cc - 1.2 litre/min
|
568.81 |
|
|
RVM1600 Fishfinder Module with RealVision Max
The next generation of DownVision, SideVision, 3D, and conventional CHIRP sonar, RealVision MAX, delivers vivid sonar imagery and fish targets like never before. RealVision MAX starts with all-new high-performance RealVision CHIRP transducers, upgraded with larger elements and increased power output for extended-range performance. Next, RealVision MAX signal processing and faster ping rates improve visual fidelity and target identification. With RealVision MAX, the structure is more recognizable, and the most elusive fish are easily identifiable with high-contrast RealVision MAX sonar color palettes.
Features:
RayNet network compatible with all Axiom displays running LightHouse 4.3 or higher
Employs the same RealVision MAX sonar technology built into the new Axiom 2 Pro RVM chartplotters
RealVision MAX sonar processing, combined with faster ping rates, delivers superior fish finding in CHIRP, Side, Down, and RealVision channels.
RealVision MAX high contrast color palettes provide better visibility of fish and structure.
The more powerful 600-watt traditional CHIRP frequency of RealVision MAX transducers provides a deeper sonar range, reducing the need for additional transducers.
RealVision 3D provides accurate target location to help pinpoint that elusive wreck or set up the perfect drift.
Support for 1kW Airmar CHIRP transducers enables fishing in waters up to 3,000ft (914 meters).
Multi-Channel Fishfinder:
CHIRP DownVision® delivers a photo-like fish finder view of the world beneath your boat. See bottom structures and fish targets with amazing detail.
CHIRP SideVision® sonar expands your underwater horizon with full port and starboard coverage of fish, bait, and underwater structure. See further and see more fish than traditional side scanning sonars.
RealVision MAX 3D fish finder lets anglers see below, behind, and to the sides of the boat. Get a new perspective of the underwater world that simplifies locating and staying on structure
RealVision MAX Transducers:
RealVision MAX transom mount and through hull transducer provide DownVision™, SideVision™, 600-Watt High CHIRP, and 3D sonar capability to the RVM1600. RealVision MAX transducers feature a built-in attitude and heading reference system (AHRS) for stabilizing 3D sonar imagery and automatically compensating for vessel motion. A fast-response built-in water temperature sensor provides quick and accurate sea temperature readings.
What's In The Box?
RVM1600 3D CHIRP sonar module
Power cable 1.5 m (4.9 ft)
RayNet (female) to RayNet (female) network cable 2 m (6.6 ft)
Documentation
Mounting screws M4.5 x 20 (x 4)
|
2399.99 |
|