|
Hydraulic Steering Fluid - Quart
Features:
Applications: All Hydraulic Steering Systems
Type: ISO 15 Low Temp Mineral Hydraulic Fluid
Select Container Size: Quart
|
17.09 |
|
|
Formulated for Baystar and SeaStar hydraulic steering systems. Engineered with a special additive package that contains anti-foaming and anti-rust agents, anti-oxidants, viscosity stabilizers, corrosion inhibitors, wear additives and water emulsification additives. Bleed hose is needed to properly bleed steering. Screws onto fluid bottle making for a clean bleed.
|
31.99 |
|
|
Formulated for Baystar and SeaStar hydraulic steering systems. Engineered with a special additive package that contains anti-foaming and anti-rust agents, anti-oxidants, viscosity stabilizers, corrosion inhibitors, wear additives and water emulsification additives. Bleed hose is needed to properly bleed steering. Screws onto fluid bottle making for a clean bleed.
|
115.99 |
|
|
Formulated for Baystar and SeaStar hydraulic steering systems. Engineered with a special additive package that contains anti-foaming and anti-rust agents, anti-oxidants, viscosity stabilizers, corrosion inhibitors, wear additives and water emulsification additives. Bleed hose is needed to properly bleed steering. Screws onto fluid bottle making for a clean bleed.
|
429.99 |
|
|
Type H for Boats with Hydraulic Steering
Features:
Connects to any hydraulic steering system
Rugged Octopus hydraulic pump
Adds pushbutton steering to your hydraulic steering
Current 3-6A Typical, 15A Peak
Includes all hoses and fittings
Wireless control module plus handheld pendant - steering in the palm of your hand
Steer, fish and cruise from anywhere on the boat
Easy DIY installation - no need for professional installer
2 Year limited warranty - purchase with confidence
Specifications:
Wireless Controller & Receiver
Meets FCC standards
Additional Handheld and receiver can be paired in field
Pendant and receiver auto-off in 30 minutes if no usage
Over 1 Million control codes provide enhanced security
Handheld Pendant
Water proof
Supplied with 2xAAA batteries
Includes lanyard
Wireless Receiver & Motor Controller
Waterproof
Motor drive capability up to 25A
Overload protection
Reverse polarity protection
12V DC nominal (9V min - 16V max operating range)
Offers pass-through capability for Autopilot motor and clutch control circuits
|
861.62 |
|
|
1 Quart Hydraulic Oil - Use with all Uflex Hydraulic Steering Systems.
|
20.48 |
|
|
Steer Stop Outboard Hydraulic Steering Lock Set - 4"
T-H Marine developed the first steering stop available for outboard motors and now we've revised that design so it stands apart from imitation and performs better than any other on the market.
With our 4" Steer Stop Outboard Hydraulic Steering Lock in place, boaters can center their outboard motor equipped with hydraulic steering and keep it from wandering when trailering. Similar to the original Steer Stop, units clip onto hydraulic steering rams on either side of outboard to keep engine straight and prevent damage to motor supports. The cord then keeps units together when stowed and aids removal.
Additionally, with the new grip built into the design, it is easier than ever to install and remove the Steer Stop Outboard Hydraulic Steering Lock, saving you effort and wear and tear on your hands.
Features:
Must-know information about the 4" Steer Stop Outboard Hydraulic Steering Lock:
Locks hydraulic steering when trailering
Fits most steering cylinder rods on outboard engines
Snaps over outboards hydraulic steering cylinder rods
Helps keep engine centered during transport
Protects steering system, outboard, and motor supports
Includes cord to connect units for storage and to aid in removal
Grip makes it even simpler and easier to put on and take off
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
17.51 |
|
|
Hydraulic Gear Pump 12V 6-9CI Cylinder
From the design team that brought you the legendary Octopus hydraulic drives, our new gear pump offers industry leading reliability and performance in a smaller, lighter, quieter package.
Features:
Industry leading efficiency - lower power consumption, particularly under demanding conditions requiring higher flow rates equates to a major advantage over competing units.
Cost saving - the increased efficiency and performance means the pumps can be used with smaller autopilot course computers than equivalent drive units.
The smaller footprint of the compact gear pump increases installation flexibility.
Lower noise and vibration make the gear pump particularly suitable for sailboat installations.
Suitable for balanced or unbalanced cylinders.
All models available for both 12v and 24v systems.
Specifications:
Flow Rate: 600CC/min
Voltage: 12 Volt
Cylinder Range: 6-9ci CYLINDER
Average Current Draw: 3.8A
Operating Temperature: -15 to +75'C (5 - 167'F)
Waterproofing: IP55
Ignition Protection: ISO 8846 & SAEJ1171
EMC Compliance: EN60945-9-2002
|
504.49 |
|
|
Hydraulic Gear Pump 12V 10-15CI Cylinder
From the design team that brought you the legendary Octopus hydraulic
drives, our new gear pump offers industry leading reliability and
performance in a smaller, lighter, quieter package.
Features:
Industry leading efficiency - lower power consumption, particularly
under demanding conditions requiring higher flow rates equates to a major
advantage over competing units.
Cost saving - the increased efficiency and performance means the pumps
can be used with smaller autopilot course computers than equivalent drive
units.
The smaller footprint of the compact gear pump increases installation
flexibility.
Lower noise and vibration make the gear pump particularly suitable for
sailboat installations.
Suitable for balanced or unbalanced cylinders.
All models available for both 12v and 24v systems.
Specifications:
Flow Rate: 1000CC/min
Voltage: 12 Volt
Cylinder Range: 10-15ci CYLINDER
Average Current Draw: 5A
Operating Temperature: -15 to +75'C (5 - 167'F)
Waterproofing: IP55
Ignition Protection: ISO 8846 & SAEJ1171
EMC Compliance: EN60945-9-2002
|
599.27 |
|
|
Hydraulic Gear Pump 12V 16-24CI Cylinder
From the design team that brought you the legendary Octopus hydraulic
drives, our new gear pump offers industry leading reliability and
performance in a smaller, lighter, quieter package.
Features:
Industry leading efficiency - lower power consumption, particularly
under demanding conditions requiring higher flow rates equates to a major
advantage over competing units.
Cost saving - the increased efficiency and performance means the pumps
can be used with smaller autopilot course computers than equivalent drive
units.
The smaller footprint of the compact gear pump increases installation
flexibility.
Lower noise and vibration make the gear pump particularly suitable for
sailboat installations.
Suitable for balanced or unbalanced cylinders.
All models available for both 12v and 24v systems.
Specifications:
Flow Rate: 1600CC/min
Voltage: 12 Volt
Cylinder Range: 16-24ci CYLINDER
Average Current Draw: 6.6A
Operating Temperature: -15 to +75'C (5 - 167'F)
Waterproofing: IP55
Ignition Protection: ISO 8846 & SAEJ1171
EMC Compliance: EN60945-9-2002
|
662.47 |
|
|
SilverSteer™ Front Mount Outboard Hydraulic Steering System w/ UC130-SVS-1 Cylinder
Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.
Whether a bass boat, flats boat or tournament-style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive, and precise steering.
Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders.
UC130-SVS-1 Cylinder is ideal for applications with limited space or potential pinch-points between the cylinder and transom (i.e., when tilting the motor all the way up or motors mounted on a jack plate). The end-mounted fittings keep the hydraulic hoses free and clear.
SilverSteer™ Package Kit Contains:
UC130-SVS-1 Cylinder (fittings face out from the ends of the cylinder)
|
1402.52 |
|
|
Hydraulic Gear Pump - 12V - 20-30CI Cylinder - 2000cc/min
Gear Pump Offers Industry Leading Reliability and Performance in a Smaller, Lighter, Quieter Package.
Features:
High Efficiency – Industry leading efficiency minimizes power consumption
Low Noise – New industry design offers significantly quieter operation
Light Weight & Compact – Small footprint offers greater installation flexibility
Wide Range Of Products – From 600 to 1600cc/min, 12v and 24v options
Professional Solutions for Hydraulically Steered Boats:
Industry Leading Efficiency – lower power consumption, particularly under demanding conditions requiring higher flow rates equates to a major advantage over competing units.
Cost Savings – the increased efficiency and performance means the pumps can be used with smaller autopilot course computers than equivalent drive units.
The smaller footprint of the compact gear pump increases installation flexibility.
Lower noise and vibration make the gear pump particularly suitable for sailboat installations.
Suitable for balanced or unbalanced cylinders.
All models available for both 12v and 24v systems.
|
792.42 |
|
|
Hydraulic Gear Pump - 24V - 20-30CI Cylinder - 2000cc/min
Gear Pump Offers Industry Leading Reliability and Performance in a Smaller, Lighter, Quieter Package.
Features:
High Efficiency – Industry leading efficiency minimizes power consumption
Low Noise – New industry design offers significantly quieter operation
Light Weight & Compact – Small footprint offers greater installation flexibility
Wide Range Of Products – From 600 to 1600cc/min, 12v and 24v options
Professional Solutions for Hydraulically Steered Boats:
Industry Leading Efficiency – lower power consumption, particularly under demanding conditions requiring higher flow rates equates to a major advantage over competing units.
Cost Savings – the increased efficiency and performance means the pumps can be used with smaller autopilot course computers than equivalent drive units.
The smaller footprint of the compact gear pump increases installation flexibility.
Lower noise and vibration make the gear pump particularly suitable for sailboat installations.
Suitable for balanced or unbalanced cylinders.
All models available for both 12v and 24v systems.
|
792.42 |
|
|
Hydraulic Gear Pump - 24V - 16-24CI Cylinder
Gear Pump Offers Industry-Leading Reliability and Performance in a Smaller, Lighter, Quieter Package.
Features:
High Efficiency – Industry-leading efficiency minimizes power consumption
Low Noise – New industry design offers significantly quieter operation
Light Weight & Compact – Small footprint offers greater installation flexibility
Wide Range Of Products – From 600 to 1600cc/min, 12v and 24v options
Professional Solutions for Hydraulically Steered Boats:
Industry-Leading Efficiency – lower power consumption, particularly under demanding conditions requiring higher flow rates equates to a major advantage over competing units.
Cost Savings – the increased efficiency and performance means the pumps can be used with smaller autopilot course computers than equivalent drive units.
The smaller footprint of the compact gear pump increases installation flexibility.
Lower noise and vibration make the gear pump particularly suitable for sailboat installations.
Suitable for balanced or unbalanced cylinders.
All models are available for both 12v and 24v systems.
|
982.99 |
|
|
Hydraulic Gear Pump - 12V - 30-40CI Cylinder
Gear Pump Offers Industry-Leading Reliability and Performance in a Smaller, Lighter, Quieter Package.
Features:
High Efficiency – Industry-leading efficiency minimizes power consumption
Low Noise – New industry design offers significantly quieter operation
Light Weight & Compact – Small footprint offers greater installation flexibility
Wide Range Of Products – From 600 to 1600cc/min, 12v and 24v options
Professional Solutions for Hydraulically Steered Boats:
Industry-Leading Efficiency – lower power consumption, particularly under demanding conditions requiring higher flow rates equates to a major advantage over competing units.
Cost Savings – the increased efficiency and performance means the pumps can be used with smaller autopilot course computers than equivalent drive units.
The smaller footprint of the compact gear pump increases installation flexibility.
Lower noise and vibration make the gear pump particularly suitable for sailboat installations.
Suitable for balanced or unbalanced cylinders.
All models are available for both 12v and 24v systems.
|
982.99 |
|