Ultramarine 8.8" Speakers - Black Polk's Ultramarine speakers are designed to produce maximum sound in marine applications.  Featuring "Air Suspension" technology and high-temperature voice coils, the Ultramarine family of speakers will crank up to 250 watts. These powerful 8.8" marine speakers have rugged, removable sport grilles that stand up to sunlight and moisture.   Also included is LED lighting built into the cone of the speaker.  Underneath, you'll find UV-treated silver polypropylene cones, durable surrounds, and cast aluminum baskets.   Features: Air Suspension Design Cast Aluminum Basket High Temp Voice coil Snap On Grille Installation Option Technical Specifications: 1" Titanium dome tweeter Sensitivity - 89.4dB Max Power - 250W 125 Watts RMS Cut-out Dimensions - 7-3/8" Mounting Depth - 4-1/6" In the Box: Two (2) - 2 way speakers Two (2) Trim rings Mounting hardware Installation manual ∗Sold in pairs WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Silicone Marine Speaker Cover for 8" Speakers - Black Special edition marine grade silicone covers to protect your 8" speakers from the harsh elements. ∗Sold as a pair

BURKS Burks 09762-C-P Mechanical Seal Viton 5/8"

Ultramarine 7.7" Speakers - Black Polk's Ultramarine speakers are designed to produce maximum sound in marine applications.  Featuring "Air Suspension" technology and high-temperature voice coils, the Ultramarine family of speakers will crank up to 200 watts. These powerful 7.7" marine speakers have rugged, removable sport grilles that stand up to sunlight and moisture.  Also included is LED lighting built into the cone of the speaker.  Underneath, you'll find UV-treated silver polypropylene cones, durable surrounds, and cast aluminum baskets.   Features: Air Suspension Design Cast Aluminum Basket High Temp Voice coil Snap On Grille Installation Option Technical Specifications: 1" Titanium dome tweeter Sensitivity - 90.2dB Max Power - 200W 100 Watts RMS Cut-out Dimensions - 6-1/4" Mounting Depth - 3-1/6" In the Box: Two (2) - 2 way speakers Two (2) Trim rings Mounting hardware Installation manual ∗Sold in pairs WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

FM-F65RB FM Series 6.5" Flush Mount Round Marine Speakers - Black Grill - 120W Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine speakers are designed to deliver enhanced acoustics to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends. Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series speakers are designed to be flush mounted with a mounting profile no thicker than 2.5mm [3/32"] for a premium, visually-appealing, near-flat finish. With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series speakers are built to last on board season after season. Enhanced Design Aesthetics The FM Series have been purposely created to meet the latest boat design trends with a sleek and minimalistic design. By incorporating a timeless, classic grille styling with two form factors (round or square) and two color options (black or white), the FM Series will complement the aesthetics of any vessel with its enhanced design cues. Innovative Flush Mount Design The innovative, flush mount design of the FM Series speakers allows for an ultra low profile installation (mounting profile no greater than 2.5mm or 3/32") for a visually appealing, premium near-flat finish never before seen on a marine speaker. The FM Series also features an intelligent mounting system for a non-intrusive, simple installation. Simply place the speaker in the cutout, tighten the screws and the 'speaker legs' will tighten against the panel, keeping the speaker in place without creating any screw holes to your vessel. The True-Marine™ Standard As a True-Marine product, the FM Series speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3-year consumer warranty. IP65 Weatherproof Perfect for installation both indoors and outdoors, the FM Series speakers are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Designed To Comply With ISO12216 The FM Series have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality. Features: Optimized Full Range Speaker: The FM Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and aluminum dome tweeters to produce quality sound at all volumes. Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel. Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the speaker in place without creating any screw holes to your vessel. True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation. Designed To Comply With ISO12216: Tested to international standards for pressure and water tightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness. Specifications: Speaker Size: 6.5" Peak Power: 120W RMS Power Rating: 30W Efficiency (1W/1M): 87 dB Frequency Response: 100 Hz - 18 kHz Nominal Impedance: 4 Ohms Recommended Amplifier Power (RMS): 15-80W/Ch Tweeter Type: Aluminum Dome Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 138mm (5-7/16") Mounting Depth Clearance: 70mm (2-3/4") Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 4L Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 3 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

FM-65SB FM Series 6.5" 120 Flush Mount Square Marine Speakers - Black Grill - 120W Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine speakers are designed to deliver enhanced acoustics to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends. Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series speakers are designed to be flush mounted with a mounting profile no thicker than 2.5mm [3/32"] for a premium, visually-appealing, near-flat finish. With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series speakers are built to last on board season after season. Enhanced Design Aesthetics The FM Series have been purposely created to meet the latest boat design trends with a sleek and minimalistic design. By incorporating a timeless, classic grille styling with two form factors (round or square) and two color options (black or white), the FM Series will complement the aesthetics of any vessel with its enhanced design cues. Innovative Flush Mount Design The innovative, flush mount design of the FM Series speakers allows for an ultra low profile installation (mounting profile no greater than 2.5mm or 3/32") for a visually appealing, premium near-flat finish never before seen on a marine speaker. The FM Series also features an intelligent mounting system for a non-intrusive, simple installation. Simply place the speaker in the cutout, tighten the screws and the 'speaker legs' will tighten against the panel, keeping the speaker in place without creating any screw holes to your vessel. The True-Marine™ Standard As a True-Marine product, the FM Series speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3-year consumer warranty. IP65 Weatherproof Perfect for installation both indoors and outdoors, the FM Series speakers are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Designed To Comply With ISO12216 The FM Series have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality. Features: Optimized Full Range Speaker: The FM Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and aluminum dome tweeters to produce quality sound at all volumes. Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel. Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the speaker in place without creating any screw holes to your vessel. True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation. Designed To Comply With ISO12216: Tested to international standards for pressure and water tightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness. Specifications: Speaker Size: 6.5" Peak Power: 120W RMS Power Rating: 30W Efficiency (1W/1M): 87 dB Frequency Response: 100 Hz - 18 kHz Nominal Impedance: 4 Ohms Recommended Amplifier Power (RMS): 15-80W/Ch Tweeter Type: Aluminum Dome Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 138mm x 138mm (5-7/16" x 5-7/16") Mounting Depth Clearance: 70mm (2-3/4") Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 4L Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 3 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

FM-F77RB FM Series 7.7" Flush Mount Round Marine Speakers - Black Grill - 200W Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine speakers are designed to deliver enhanced acoustics to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends. Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series speakers are designed to be flush mounted with a mounting profile no thicker than 2.5mm [3/32"] for a premium, visually-appealing, near-flat finish. With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series speakers are built to last on board season after season. Enhanced Design Aesthetics The FM Series have been purposely created to meet the latest boat design trends with a sleek and minimalistic design. By incorporating a timeless, classic grille styling with two form factors (round or square) and two color options (black or white), the FM Series will complement the aesthetics of any vessel with its enhanced design cues. Innovative Flush Mount Design The innovative, flush mount design of the FM Series speakers allows for an ultra low profile installation (mounting profile no greater than 2.5mm or 3/32") for a visually appealing, premium near-flat finish never before seen on a marine speaker. The FM Series also features an intelligent mounting system for a non-intrusive, simple installation. Simply place the speaker in the cutout, tighten the screws and the 'speaker legs' will tighten against the panel, keeping the speaker in place without creating any screw holes to your vessel. The True-Marine™ Standard As a True-Marine product, the FM Series speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3-year consumer warranty. IP65 Weatherproof Perfect for installation both indoors and outdoors, the FM Series speakers are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Designed To Comply With ISO12216 The FM Series have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality. Features: Optimized Full Range Speaker: The FM Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and aluminum dome tweeters to produce quality sound at all volumes. Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel. Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the speaker in place without creating any screw holes to your vessel. True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation. Designed To Comply With ISO12216: Tested to international standards for pressure and watertightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness. Specifications: Speaker Size: 7.7" Peak Power: 200W RMS Power Rating: 50W Efficiency (1W/1M): 91 dB Frequency Response: 80 Hz - 18 kHz Nominal Impedance: 4 Ohms Recommended Amplifier Power (RMS): 20-150W/Ch Tweeter Type: Aluminum Dome Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 165mm (6-1/2") Mounting Depth Clearance: 83mm (3-1/4") Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 8L Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 3 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

FM-F77RB FM Series 7.7" Flush Mount Square Marine Speakers - Black Grill - 200W Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine speakers are designed to deliver enhanced acoustics to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends. Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series speakers are designed to be flush mounted with a mounting profile no thicker than 2.5mm [3/32"] for a premium, visually-appealing, near-flat finish. With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series speakers are built to last on board season after season. Enhanced Design Aesthetics The FM Series have been purposely created to meet the latest boat design trends with a sleek and minimalistic design. By incorporating a timeless, classic grille styling with two form factors (round or square) and two color options (black or white), the FM Series will complement the aesthetics of any vessel with its enhanced design cues. Innovative Flush Mount Design The innovative, flush mount design of the FM Series speakers allows for an ultra low profile installation (mounting profile no greater than 2.5mm or 3/32") for a visually appealing, premium near-flat finish never before seen on a marine speaker. The FM Series also features an intelligent mounting system for a non-intrusive, simple installation. Simply place the speaker in the cutout, tighten the screws and the 'speaker legs' will tighten against the panel, keeping the speaker in place without creating any screw holes to your vessel. The True-Marine™ Standard As a True-Marine product, the FM Series speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3-year consumer warranty. IP65 Weatherproof Perfect for installation both indoors and outdoors, the FM Series speakers are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Designed To Comply With ISO12216 The FM Series have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality. Features: Optimized Full Range Speaker: The FM Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and aluminum dome tweeters to produce quality sound at all volumes. Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel. Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the speaker in place without creating any screw holes to your vessel. True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation. Designed To Comply With ISO12216: Tested to international standards for pressure and watertightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness. Specifications: Speaker Size: 7.7" Peak Power: 200W RMS Power Rating: 50W Efficiency (1W/1M): 91 dB Frequency Response: 80 Hz - 18 kHz Nominal Impedance: 4 Ohms Recommended Amplifier Power (RMS): 20-150W/Ch Tweeter Type: Aluminum Dome Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 165mm x 165mm (6-1/2" x 6-1/2") Mounting Depth Clearance: 83mm (3-1/4") Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 8L Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 3 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SM-F65CB SM Series 6.5" Shallow Mount Square Speakers - Black Cloth Grill - 100W Unique shallow mount design without compromising on sound quality. Fusion's SM Series shallow mount speakers, designed for installations where mounting depth is limited without compromising on sound quality and performance. The SM Series speakers are engineered with a sealed, perfectly-tuned enclosure to deliver quality audio reproduction that normally could not be achieved from the limitations of shallow mounting depths. Available in two colors (black or white), the SM Series speakers are a stylish addition to your vessel with its clean aesthetics and unique shallow mount form factor. Quality Audio Reproduction with Unique Shallow Mount Design The SM Series speakers solves the age-old problem of achieving quality audio reproduction from the limitations of shallow mounting depths often required in many installations. By engineering a tuned, sealed enclosure into the back of the speaker, it eliminates the need to have sufficient volume behind the speaker for quality audio reproduction. This makes the SM Series speakers capable of producing high-quality sound even with one of the most restrictive mounting depths of only 24mm [15/16"], allowing them to be installed in areas many other speakers will not fit, such as cabinets. Versatile Mounting Solutions The SM Series has two optional accessory mounting spacers to support installations in various positions. IP65 Weatherproof The SM Series speakers are designed for the harsh marine environment and are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Features: Shallow Basket Design - With a shallow mounting depth of only 24mm [15/16"], the SM Series speakers are ideal for installation where mounting depth is limited. Tuned, Sealed Enclosure Design - Protects the speakers' components from damage and ensures quality audio reproduction is delivered that normally could not be achieved by a speaker with such a shallow design. Retrofittable - The SM Series speakers have a circular back with a mounting diameter clearance of 130mm [5-1/8"], allowing it to fit easily into existing 6.5" speaker cutouts. Aesthetic Interior Design - Designed with aesthetics in mind, the SM Series come with a high-end acoustic fabric grille and feature rounded edges and contour cues to add style to your vessel. IP65 Weatherproof - The SM Series speakers are rated IP65 for protection against dust and water ingress in the harsh marine environment. Specifications: Cloth Grill cover Speaker Enclosure Size: 155mm x 155mm [6-1/8" x 6-1/8"]  Peak Power: 100W Driver Size: Tuned and optimized 3" Efficiency (1W/1M): 84 dB Frequency Response: 150 Hz - 20 kHz Nominal Impedance: 4 Ohms Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 130mm (5-1/8") Mounting Depth Clearance: 24mm (15/16") Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 1 Year WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SG-X77B 7.7" Grill Cover for SG Series Speakers - Black The stylish Classic grilles for the Fusion Signature Series speakers are now available in black! Complementing your elegant on-board aesthetics, the Classic Black grilles are designed to blend in with dark colored interiors and entertaining areas, for a discreet yet stylish audio entertainment setup. Just like your Classic White Signature Series grilles, these black perforated metal grilles are suitable for both indoor and outdoor installation on board. Simply remove the existing Classic White grilles on your Signature Series speakers, fit the black grilles into place and enjoy the signature sound you’re used to, with your speakers blending elegantly in with the background.  Specifications: Diameter: 220mm (8-11/16") Depth: 28.5mm (1-1/8") Sold as a Pair WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

7.7" ME-Series Speakers - Black & White Sport Grille Covers - 250W  Pioneer ME-series speakers (both Sports and Classic designs) are protected from the effects of sun and water exposure, meeting both IPX7 and ASTM D4329 certification to achieve all-weather reliability. Mica Reinforced IMPP monocoque cone with butyl rubber surround, constructed using an advanced in-mold bonding technique for superior water resistance while maintaining high quality, powerful sound. The symmetrical motor design with high strength suspension is optimized to provide stability, linearity and clear, low distortion sound reproduction. Lightweight polyimide (PI) tweeter diaphragm and uniquely shaped wave guide provides natural and clear vocals with wide dispersion. The TS-ME770FC 7.7″ Speakers comes with two sleek modern grilles, one in black and the other in a white finish that cosmetically integrate seamlessly into marine interiors and cabin designs.  *Optional UD-ME770LED RGB LED Light Kit (Sold Separately) provides illumination of the woofer cone for an enhanced personalization and cosmetic integration. Features: 7.7" Two Way Coaxial System 13/16" (20mm) Dome Tweeter Built-in RGB LED Lighting Option Technical Specifications: Cone Material - Water-Resistant IMPP Sensitivity - 88dB Max Power - 250W 75 Watts RMS Cut-out Dimensions - 6-1/4" Mounting Depth - 3-1/8" In the Box: Two (2) - 2 way speakers Two (2) Classic White grilles Mounting hardware Installation manual ∗Sold as a pair

Silicone Marine Speaker Cover for 6.5" Speakers - Black Special edition marine grade silicone covers to protect your 6.5" speakers from the harsh elements. ∗Sold as a pair

HYDRO 8" Marine Tower Speakers with RGB LED Lights & Pro Audio Loudspeakers - Black The NXL-X8PRO is DS18’s revamped compact wakeboard tower speaker designed to turn your sound system's volume ALL THE WAY UP! The new and improved clamping system these models come equipped with paired with their compact size makes it possible for these tower speakers to be installed just about anywhere. This upgraded model of the NXL-X8 comes equipped with a Pro Audio Water Resistant Hybrid Mid-Range & Compression Driver Loudspeaker, the PRO-HY8.4B, for an expansive range of frequencies that get as high as 20KHz and as low as 80Hz. The neodymium magnets installed in the PRO-HY8.4B’s compression driver reinforce the motor/cone assembly providing these tower pods with unbreakable strength and durability. The NXL-X8PRO has a larger voice coil with a higher potential for loudness over the standard NXL complete pods which also adds great sound reproduction and extended longevity. The power handling ratings on these pods are 250W RMS and 500W MAX, which is double the standard NXL pod rating. These tower speakers also have integrated RGB LED Lighting to complement the vibe of any system. The LED BTC (LED Bluetooth Controller) is sold separately and required to control the lights on this speaker. The NXL-X8PRO is an unbreakable volume-maximizing tower speaker that’s guaranteed to revitalize any sound system. Features: DS18 hydro series 8" tower speaker with built-in hybrid mid-range & compression driver to blast the competition's audio away. Enhanced durability and power handling for a tower speaker with unmatched longevity Pair the NBR pad with a 1” to 2” tube to help get the best fitment for your tower size Camps for 1” to 2” roll cage or tube Two CS8 silicone marine speaker covers included for added protection The front logo and back covers can be rotated for correct angle display RGB led system designed throughout the pod, so you see lighting on the speaker ring, and pod housing Great For: Marine audio ATV audio UTV audio Jeep audio Off-road audio DIY projects Specifications: Color: Matte black Nominal Diameter: 8 in. / 203mm Nominal Impedance: 4 Ohms RMS Power Handling: 250W MAX Power Handling: 500W Sensitivity (1w/1m): 97dB Frequency Response: 80Hz - 20KHz Recommended HI Pass Crossover: 100Hz Measurement: Overall Diameter: 8.6 in. / 218mm Overall Depth: 9.4 in. / 238mm Overall Height: 12.3 in. / 313mm

Speaker Spacer for Infinity Reference Series 8" Speakers - .50" - Black Don't have enough depth to install your speaker/subwoofer?  Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer. Specifications: Thickness - .50" Edge - 1/16" Round Outer Diameter - 8.78" or 223 mm Bolt Hole Circle Diameter - 7.72" or 196 mm Mounting Hole Diameter - 6.77" or 172 mm Compatible With 8" Reference: 822MLW and 822MLT *Sold as a Pair This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Speaker Spacer for Infinity Reference Series 8" Speakers - 1" - Black Don't have enough depth to install your speaker/subwoofer?  Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer. Specifications: Thickness - 1" Edge - 1/16" Round Outer Diameter - 8.78" or 223 mm Bolt Hole Circle Diameter - 7.72" or 196 mm Mounting Hole Diameter - 6.77" or 172 mm Compatible With 8" Reference: 822MLW and 822MLT *Sold as a Pair This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.