|
Pulsafeeder LB02SA-PHC1-XXX 6 Gpd 150 Psi 115V Pump
Max Flow: 0.25 gph (6 gpd)
Max Pressure: 150 psi (10 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: GFPPL (Glass Filled Polypropylene)
Seats / O-Rings: CSPE (Hypalon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB02SA-PHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
674.06 |
|
|
Pulsafeeder LB02SA-VHC1-XXX Pump A Plus 6Gpd
Max Flow: 0.25 gph (6 gpd)
Max Pressure: 150 psi (10 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVC (Polyvinyl Chloride)
Seats / O-Rings: CSPE (Hypalon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB02SA-VHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
674.06 |
|
|
Pulsafeeder LB02SA-VTC1-XXX Pump A Plus 6Gpd
Max Flow: 0.25 gph (6 gpd)
Max Pressure: 150 psi (10 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVC (Polyvinyl Chloride)
Seats / O-Rings: TFE (Teflon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB02SA-VTC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
690.94 |
|
|
Pulsafeeder LB02SA-KTC1-XXX Pump A Plus 6Gpd
Max Flow: 0.25 gph (6 gpd)
Max Pressure: 150 psi (10 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVDF (Kynar)
Seats / O-Rings: TFE (Teflon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB02SA-KTC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
743.40 |
|
|
Pulsafeeder LB64SA-PHC1-XXX Pump 30 Gpd A Plus
Max Flow: 1.25 gph (30 gpd)
Max Pressure: 100 psi (7 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: GFPPL (Glass Filled Polypropylene)
Seats / O-Rings: CSPE (Hypalon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB64SA-PHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
674.06 |
|
|
Pulsafeeder LC04SA-PHC1-XXX Metering Pump 24Gpd 115V
|
537.19 |
|
|
Pulsafeeder LPE4SA-PTT1-XXX Metering Pump
Max Flow: 1.85 gph (44 gpd)
Max Pressure: 100 psi (7 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: GFPPL (Glass Filled Polypropylene)
Seats / O-Rings: TFE (Teflon)
Balls: TFE (Teflon)
Tubing: 3/8" OD
Control: Manual On/Off
The Pulsafeeder Pulsatron LPE4SA-PTT1-XXX Series E Plus Metering pump has a large range of flow and pressure capabilities, make it one of the most versatile series of metering pumps that Pulsafeeder offers. The Series E Plus has flow capabilities ranging from 3 GPD (Gallons per Day) to 600 GPD. The GPD combined with the pressure range of 30 to 300 PSI makes the Series E Plus an excellent choice for your metering application. Having such a wide range of flow and pressure capabilities, you can choose from 20 different pump models in the Series to fit your exact specifications.
Features:
- Manual On/Off Control, Automatic control or 4-20mADC Direct w/ stop function depending on the model.
- Manual control of stroke rate and length via control knobs on the front of the pump.
- Fuse mounted on the panel for extra protection.
- Designed out of water resistant material (perfect for indoor & outdoor placement).
|
1139.40 |
|
|
Pulsafeeder LPH6SA-VTC3-XXX E Plus Pump 120 Gpd
Max Flow: 5.00 gph (120 gpd)
Max Pressure: 100 psi (7 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVC (Polyvinyl Chloride)
Seats / O-Rings: TFE (Teflon)
Balls: Ceramic
Tubing: 1/2" OD
Control: Manual On/Off
The Pulsafeeder Pulsatron LPH6SA-VTC3-XXX Series E Plus Metering pump has a large range of flow and pressure capabilities, make it one of the most versatile series of metering pumps that Pulsafeeder offers. The Series E Plus has flow capabilities ranging from 3 GPD (Gallons per Day) to 600 GPD. The GPD combined with the pressure range of 30 to 300 PSI makes the Series E Plus an excellent choice for your metering application. Having such a wide range of flow and pressure capabilities, you can choose from 20 different pump models in the Series to fit your exact specifications.
Features:
- Manual On/Off Control, Automatic control or 4-20mADC Direct w/ stop function depending on the model.
- Manual control of stroke rate and length via control knobs on the front of the pump.
- Fuse mounted on the panel for extra protection.
- Designed out of water resistant material (perfect for indoor & outdoor placement).
|
1555.20 |
|
|
Pulsafeeder LPH4SA-PTC1-XXX E Plus Pump 40 Gpd
Max Flow: 1.70 gph (41 gpd)
Max Pressure: 250 psi (17 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: GFPPL (Glass Filled Polypropylene)
Seats / O-Rings: TFE (Teflon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
The Pulsafeeder Pulsatron LPH4SA-PTC1-XXX Series E Plus Metering pump has a large range of flow and pressure capabilities, make it one of the most versatile series of metering pumps that Pulsafeeder offers. The Series E Plus has flow capabilities ranging from 3 GPD (Gallons per Day) to 600 GPD. The GPD combined with the pressure range of 30 to 300 PSI makes the Series E Plus an excellent choice for your metering application. Having such a wide range of flow and pressure capabilities, you can choose from 20 different pump models in the Series to fit your exact specifications.
Features:
- Manual On/Off Control, Automatic control or 4-20mADC Direct w/ stop function depending on the model.
- Manual control of stroke rate and length via control knobs on the front of the pump.
- Fuse mounted on the panel for extra protection.
- Designed out of water resistant material (perfect for indoor & outdoor placement).
|
1929.60 |
|
|
Pulsafeeder LB64SA-VHC1-XXX Metering Pump 30Gpd Hypalon
Max Flow: 1.25 gph (30 gpd)
Max Pressure: 100 psi (7 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVC (Polyvinyl Chloride)
Seats / O-Rings: CSPE (Hypalon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB64SA-VHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
674.06 |
|
|
Proven 360-115V, Utility Pump Self Priming
Proven Pump Utility Pump is a Self Priming Rubber Impeller pump. With male Garden Hose Thread and 3/8”FNPT, It runs on 115V and pumps 360GPH. This pump is NOT USCG Approved
|
241.80 |
|
|
Groco Psr 115V Pump Paragon Senior Wps
Groco- Paragon Senior Water Pressure System 11 GPM at 30-50psi 115V
|
3075.33 |
|
|
March AC-2AP-MD 115vac
Applications for the AC-2AP-MD Mag Drive include etching equipment, photographic processing equipment, ice makers, ice flakers, plate processors, and marine air conditioning.
March Pump's industrial AC-2AP-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 5 gallons per minute at 2 feet, and its maximum head is 13 Feet (or around 5.5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ceramic, and Ceramic Magnet. The inlet connection is 0.75 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.025 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-2AP-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Max Flow 250 GPH 18.5 LPM up to a 6000 BTU Air Conditioner
Max Head 13 FT 2.7 M
Power .025 HP .018 KW
Electrical 115V 50/60HZ
Type Centrifugal Mag Drive
Inlet 3/4"OD
Outlet 1/2"OD
Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washer), Ceramic Magnet
|
288.60 |
|
|
March Pump's AC-5B-MD Beer Pump is an American seal-less centrifugal magnetic drive pump ideal for homebrewing. It is capable of generating a maximum flow of 17 gallons per minute at 1 foot, and its maximum head is 27 Feet (or around 11PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polysulfone, Buna N, Ceramic, and Ceramic Magnet. The inlet connection is 1 inch female pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.125 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 225 Fahrenheit or 107 Celsius. The AC-5B-MD Beer Pump pumps Hot Water and Hot Wort.
Unit System 60Hz 50Hz Max Flow
17 GPM
60 LPM
Max Head
27 FT
6 M
Power
.125 HP
.093 KW
Electrical
115V 60Hz
Type
Metering Pump
Inlet
1"FPT
Outlet
1/2"MPT
Wet End
Polysulfone (Front and Rear Housing, Impeller), Stainless Steel (Magnet Shell, Shaft), Buna N (O-Ring), Ceramic (Thrust Washers)
Can handle liquids of 225F
Materials are FDA Food Compliant
American Made
Components are UL Recognized
|
580.13 |
|
|
March 815 BR-C 115V Pump Assy W/Base 115V
|
434.85 |
|